From: Slava Strebkov <slavas-hKgKHo2Ms0F+cjeuK/JdrQ@public.gmane.org>
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH]opensm: QOS options for switch leaf (edge) ports.
Date: Mon, 25 Jan 2010 15:03:44 +0200 [thread overview]
Message-ID: <4B5D96B0.8030903@Voltaire.COM> (raw)
New QOS option for edge ports allows to set
different sl 2 vl mapping for switch ports
connected to HCAs.
Signed-off-by: Slava Strebkov <slavas-smomgflXvOZWk0Htik3J/w@public.gmane.org>
---
opensm/include/opensm/osm_subnet.h | 1 +
opensm/opensm/osm_qos.c | 21 ++++++++++++++++++---
opensm/opensm/osm_subnet.c | 14 ++++++++++++++
3 files changed, 33 insertions(+), 3 deletions(-)
diff --git a/opensm/include/opensm/osm_subnet.h b/opensm/include/opensm/osm_subnet.h
index 65f687a..31681aa 100644
--- a/opensm/include/opensm/osm_subnet.h
+++ b/opensm/include/opensm/osm_subnet.h
@@ -212,6 +212,7 @@ typedef struct osm_subn_opt {
osm_qos_options_t qos_ca_options;
osm_qos_options_t qos_sw0_options;
osm_qos_options_t qos_swe_options;
+ osm_qos_options_t qos_sw_edge_options;
osm_qos_options_t qos_rtr_options;
boolean_t enable_quirks;
boolean_t no_clients_rereg;
diff --git a/opensm/opensm/osm_qos.c b/opensm/opensm/osm_qos.c
index 6bbbfa2..51f0aed 100644
--- a/opensm/opensm/osm_qos.c
+++ b/opensm/opensm/osm_qos.c
@@ -202,15 +202,21 @@ static ib_api_status_t sl2vl_update_table(osm_sm_t * sm, osm_physp_t * p,
}
static int qos_extports_setup(osm_sm_t * sm, osm_node_t *node,
- const struct qos_config *qcfg)
+ const struct qos_config *qcfg, boolean_t edge_ports_only)
{
osm_physp_t *p0, *p;
+ osm_node_t *p_remote_node;
unsigned force_update;
unsigned num_ports = osm_node_get_num_physp(node);
int ret = 0;
unsigned i, j;
for (i = 1; i < num_ports; i++) {
+ if (edge_ports_only) {
+ p_remote_node = osm_node_get_remote_node(node, i, NULL);
+ if (p_remote_node && (osm_node_get_type(p_remote_node) != IB_NODE_TYPE_CA))
+ continue;
+ }
p = osm_node_get_physp_ptr(node, i);
force_update = p->need_update || sm->p_subn->need_update;
p->vl_high_limit = qcfg->vl_high_limit;
@@ -231,6 +237,11 @@ static int qos_extports_setup(osm_sm_t * sm, osm_node_t *node,
}
for (i = 1; i < num_ports; i++) {
+ if (edge_ports_only ) {
+ p_remote_node = osm_node_get_remote_node(node, i, NULL);
+ if (p_remote_node && (osm_node_get_type(p_remote_node) != IB_NODE_TYPE_CA))
+ continue;
+ }
p = osm_node_get_physp_ptr(node, i);
force_update = p->need_update || sm->p_subn->need_update;
for (j = 0; j < num_ports; j++)
@@ -262,7 +273,7 @@ static int qos_endport_setup(osm_sm_t * sm, osm_physp_t * p,
int osm_qos_setup(osm_opensm_t * p_osm)
{
- struct qos_config ca_config, sw0_config, swe_config, rtr_config;
+ struct qos_config ca_config, sw0_config, swe_config, sw_edge_config, rtr_config;
struct qos_config *cfg;
cl_qmap_t *p_tbl;
cl_map_item_t *p_next;
@@ -281,6 +292,8 @@ int osm_qos_setup(osm_opensm_t * p_osm)
&p_osm->subn.opt.qos_options);
qos_build_config(&swe_config, &p_osm->subn.opt.qos_swe_options,
&p_osm->subn.opt.qos_options);
+ qos_build_config(&sw_edge_config, &p_osm->subn.opt.qos_sw_edge_options,
+ &p_osm->subn.opt.qos_options);
qos_build_config(&rtr_config, &p_osm->subn.opt.qos_rtr_options,
&p_osm->subn.opt.qos_options);
@@ -297,9 +310,11 @@ int osm_qos_setup(osm_opensm_t * p_osm)
p_node = p_port->p_node;
if (p_node->sw) {
- if (qos_extports_setup(&p_osm->sm, p_node, &swe_config))
+ if (qos_extports_setup(&p_osm->sm, p_node, &swe_config, FALSE))
ret = -1;
+ if (qos_extports_setup(&p_osm->sm, p_node, &sw_edge_config, TRUE))
+ ret = -1;
/* skip base port 0 */
if (!ib_switch_info_is_enhanced_port0
(&p_node->sw->switch_info))
diff --git a/opensm/opensm/osm_subnet.c b/opensm/opensm/osm_subnet.c
index edbffe8..aa82f32 100644
--- a/opensm/opensm/osm_subnet.c
+++ b/opensm/opensm/osm_subnet.c
@@ -385,6 +385,11 @@ static const opt_rec_t opt_tbl[] = {
{ "qos_swe_vlarb_high", OPT_OFFSET(qos_swe_options.vlarb_high), opts_parse_charp, NULL, 1 },
{ "qos_swe_vlarb_low", OPT_OFFSET(qos_swe_options.vlarb_low), opts_parse_charp, NULL, 1 },
{ "qos_swe_sl2vl", OPT_OFFSET(qos_swe_options.sl2vl), opts_parse_charp, NULL, 1 },
+ { "qos_edge_max_vls", OPT_OFFSET(qos_sw_edge_options.max_vls), opts_parse_uint32, NULL, 1 },
+ { "qos_edge_high_limit", OPT_OFFSET(qos_sw_edge_options.high_limit), opts_parse_int32, NULL, 1 },
+ { "qos_edge_vlarb_high", OPT_OFFSET(qos_sw_edge_options.vlarb_high), opts_parse_charp, NULL, 1 },
+ { "qos_edge_vlarb_low", OPT_OFFSET(qos_sw_edge_options.vlarb_low), opts_parse_charp, NULL, 1 },
+ { "qos_edge_sl2vl", OPT_OFFSET(qos_sw_edge_options.sl2vl), opts_parse_charp, NULL, 1 },
{ "qos_rtr_max_vls", OPT_OFFSET(qos_rtr_options.max_vls), opts_parse_uint32, NULL, 1 },
{ "qos_rtr_high_limit", OPT_OFFSET(qos_rtr_options.high_limit), opts_parse_int32, NULL, 1 },
{ "qos_rtr_vlarb_high", OPT_OFFSET(qos_rtr_options.vlarb_high), opts_parse_charp, NULL, 1 },
@@ -768,6 +773,7 @@ void osm_subn_set_default_opt(IN osm_subn_opt_t * p_opt)
subn_init_qos_options(&p_opt->qos_ca_options, NULL);
subn_init_qos_options(&p_opt->qos_sw0_options, NULL);
subn_init_qos_options(&p_opt->qos_swe_options, NULL);
+ subn_init_qos_options(&p_opt->qos_sw_edge_options, NULL);
subn_init_qos_options(&p_opt->qos_rtr_options, NULL);
}
@@ -1112,6 +1118,8 @@ int osm_subn_verify_config(IN osm_subn_opt_t * p_opts)
&p_opts->qos_options);
subn_verify_qos_set(&p_opts->qos_swe_options, "qos_swe",
&p_opts->qos_options);
+ subn_verify_qos_set(&p_opts->qos_sw_edge_options, "qos_edge",
+ &p_opts->qos_options);
subn_verify_qos_set(&p_opts->qos_rtr_options, "qos_rtr",
&p_opts->qos_options);
}
@@ -1220,6 +1228,8 @@ int osm_subn_rescan_conf_files(IN osm_subn_t * p_subn)
&p_opts->file_opts->qos_sw0_options);
subn_init_qos_options(&p_opts->qos_swe_options,
&p_opts->file_opts->qos_swe_options);
+ subn_init_qos_options(&p_opts->qos_sw_edge_options,
+ &p_opts->file_opts->qos_sw_edge_options);
subn_init_qos_options(&p_opts->qos_rtr_options,
&p_opts->file_opts->qos_rtr_options);
@@ -1620,6 +1630,10 @@ int osm_subn_output_conf(FILE *out, IN osm_subn_opt_t * p_opts)
&p_opts->qos_swe_options);
fprintf(out, "\n");
subn_dump_qos_options(out,
+ "QoS Edge ports options", "qos_edge",
+ &p_opts->qos_sw_edge_options);
+ fprintf(out, "\n");
+ subn_dump_qos_options(out,
"QoS Router ports options", "qos_rtr",
&p_opts->qos_rtr_options);
fprintf(out, "\n");
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2010-01-25 13:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-25 13:03 Slava Strebkov [this message]
[not found] ` <4B5D96B0.8030903-hKgKHo2Ms0F+cjeuK/JdrQ@public.gmane.org>
2010-01-28 15:29 ` [PATCH]opensm: QOS options for switch leaf (edge) ports Hal Rosenstock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B5D96B0.8030903@Voltaire.COM \
--to=slavas-hkgkho2ms0f+cjeuk/jdrq@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).