From: Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
To: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCHv2 1/2] libibmad: Support for Mellanox vendor specific ExtendedPortInfo SM class MAD
Date: Fri, 22 Jul 2011 19:55:17 -0400 [thread overview]
Message-ID: <4E2A0DE5.6000207@dev.mellanox.co.il> (raw)
In-Reply-To: <20110722153704.a0b87091.weiny2-i2BcT+NCU+M@public.gmane.org>
On 7/22/2011 6:37 PM, Ira Weiny wrote:
> I don't know if it would be more appropriate in ib_types.h or here but what are the values for the speeds indicated.
Typically there has been duplication between libibmad and ib_types.h.
> I assume 0 is _not_ FDR10 but what is FDR10, 0x01?
Yes; that's all that's currrently defined. The rest is reserved.
> Also with that define the dump function could be more than "mad_dump_hex".
I thought just hex dumping was sufficient for now. Other fields are done
this way. Does it really need a pretty print ?
-- Hal
>
> Ira
>
> On Fri, 22 Jul 2011 04:22:03 -0700
> Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org> wrote:
>
>>
>> for FDR10 operation
>>
>> Signed-off-by: Hal Rosenstock <hal-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
>> ---
>> Changes since v1:
>> Rebased
>>
>> diff --git a/include/infiniband/mad.h b/include/infiniband/mad.h
>> index b1258bd..60bc0d8 100644
>> --- a/include/infiniband/mad.h
>> +++ b/include/infiniband/mad.h
>> @@ -141,7 +141,9 @@ enum SMI_ATTR_ID {
>> IB_ATTR_VENDORMADSTBL = 0x1d,
>> IB_ATTR_SMINFO = 0x20,
>>
>> - IB_ATTR_LAST
>> + IB_ATTR_LAST,
>> +
>> + IB_ATTR_MLNX_EXT_PORT_INFO = 0xff90,
>> };
>>
>> enum SA_ATTR_ID {
>> @@ -1023,6 +1025,15 @@ enum MAD_FIELDS {
>> IB_PC_VL_XMIT_TIME_CONG14,
>> IB_PC_VL_XMIT_TIME_CONG_LAST_F,
>>
>> + /*
>> + * Mellanox ExtendedPortInfo fields
>> + */
>> + IB_MLNX_EXT_PORT_STATE_CHG_ENABLE_F,
>> + IB_MLNX_EXT_PORT_LINK_SPEED_SUPPORTED_F,
>> + IB_MLNX_EXT_PORT_LINK_SPEED_ENABLED_F,
>> + IB_MLNX_EXT_PORT_LINK_SPEED_ACTIVE_F,
>> + IB_MLNX_EXT_PORT_LAST_F,
>> +
>> IB_FIELD_LAST_ /* must be last */
>> };
>>
>> @@ -1361,7 +1372,8 @@ MAD_EXPORT ib_mad_dump_fn
>> mad_dump_perfcounters_port_vl_xmit_flow_ctl_update_errors, mad_dump_perfcounters_port_vl_xmit_wait_counters,
>> mad_dump_perfcounters_sw_port_vl_congestion, mad_dump_perfcounters_rcv_con_ctrl,
>> mad_dump_perfcounters_sl_rcv_fecn, mad_dump_perfcounters_sl_rcv_becn,
>> - mad_dump_perfcounters_xmit_con_ctrl, mad_dump_perfcounters_vl_xmit_time_cong;
>> + mad_dump_perfcounters_xmit_con_ctrl, mad_dump_perfcounters_vl_xmit_time_cong,
>> + mad_dump_mlnx_ext_port_info;
>>
>> MAD_EXPORT void mad_dump_fields(char *buf, int bufsz, void *val, int valsz,
>> int start, int end);
>> diff --git a/src/dump.c b/src/dump.c
>> index 52b2010..29fb742 100644
>> --- a/src/dump.c
>> +++ b/src/dump.c
>> @@ -957,6 +957,12 @@ void mad_dump_perfcounters_vl_xmit_time_cong(char *buf, int bufsz, void *val, in
>> IB_PC_VL_XMIT_TIME_CONG_LAST_F);
>> }
>>
>> +void mad_dump_mlnx_ext_port_info(char *buf, int bufsz, void *val, int valsz)
>> +{
>> + _dump_fields(buf, bufsz, val, IB_MLNX_EXT_PORT_STATE_CHG_ENABLE_F,
>> + IB_MLNX_EXT_PORT_LAST_F);
>> +}
>> +
>> void xdump(FILE * file, char *msg, void *p, int size)
>> {
>> #define HEX(x) ((x) < 10 ? '0' + (x) : 'a' + ((x) -10))
>> diff --git a/src/fields.c b/src/fields.c
>> index 23947dc..04c60c7 100644
>> --- a/src/fields.c
>> +++ b/src/fields.c
>> @@ -772,6 +772,15 @@ static const ib_field_t ib_mad_f[] = {
>> {480, 32, "PortVLXmitTimeCong14", mad_dump_uint},
>> {0, 0}, /* IB_PC_VL_XMIT_TIME_CONG_LAST_F */
>>
>> + /*
>> + * Mellanox ExtendedPortInfo fields
>> + */
>> + {BITSOFFS(24, 8), "StateChangeEnable", mad_dump_hex},
>> + {BITSOFFS(56, 8), "LinkSpeedSupported", mad_dump_hex},
>> + {BITSOFFS(88, 8), "LinkSpeedEnabled", mad_dump_hex},
>> + {BITSOFFS(120, 8), "LinkSpeedActive", mad_dump_hex},
>> + {0, 0}, /* IB_MLNX_EXT_PORT_LAST_F */
>> +
>> {0, 0} /* IB_FIELD_LAST_ */
>>
>> };
>> diff --git a/src/libibmad.map b/src/libibmad.map
>> index f0b42a5..508c18b 100644
>> --- a/src/libibmad.map
>> +++ b/src/libibmad.map
>> @@ -18,6 +18,7 @@ IBMAD_1.3 {
>> mad_dump_linkwidth;
>> mad_dump_linkwidthen;
>> mad_dump_linkwidthsup;
>> + mad_dump_mlnx_ext_port_info;
>> mad_dump_mtu;
>> mad_dump_node_type;
>> mad_dump_nodedesc;
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-07-22 23:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-22 11:22 [PATCHv2 1/2] libibmad: Support for Mellanox vendor specific ExtendedPortInfo SM class MAD Hal Rosenstock
[not found] ` <4E295D5B.2070005-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2011-07-22 22:37 ` Ira Weiny
[not found] ` <20110722153704.a0b87091.weiny2-i2BcT+NCU+M@public.gmane.org>
2011-07-22 23:55 ` Hal Rosenstock [this message]
[not found] ` <4E2A0DE5.6000207-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2011-07-23 0:08 ` Ira Weiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E2A0DE5.6000207@dev.mellanox.co.il \
--to=hal-ldsdmyg8hgv8yrgs2mwiifqbs+8scbdb@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=weiny2-i2BcT+NCU+M@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox