[Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Doug Ledford]

[-- Attachment #1: Type: text/plain, Size: 1017 bytes --]

The -a mode of perfquery is intended to loop through all ports on a 
single HCA and provide aggregated output across all ports.

The -l mode is intended to loop through all ports of a single HCA and 
output non-aggregated data.

Neither mode addresses a machine with more than one HCA.  Furthermore, I 
found both -a and -l failed to loop properly on my Mellanox adapter (it 
would read the first port and error out trying to read the second).

So, I wrote a new switch, -H, that loops through all ports on all HCAs 
in the system.  Because of how it's implemented, it gets around the 
problem that both -a and -l had on my machine when dealing with the 
second Mellanox port.  It, however, does not do aggregated output 
because each HCA/port combination is treated as its own device.

I forgot to update the man page though.  If the current infiniband-diags 
maintainer wants it, I can add that (that's assuming the base patch is 
acceptable).  I think Ira is doing that now, right?

Anyway, attached is the patch.

[-- Attachment #2: infiniband-diags-1.5.8-all_hcas.patch --]
[-- Type: text/plain, Size: 10195 bytes --]

diff -up infiniband-diags-1.5.8/src/perfquery.c.hcas infiniband-diags-1.5.8/src/perfquery.c
--- infiniband-diags-1.5.8/src/perfquery.c.hcas	2011-02-16 05:13:21.000000000 -0500
+++ infiniband-diags-1.5.8/src/perfquery.c	2011-07-29 17:17:41.599262511 -0400
@@ -347,7 +347,7 @@ static void reset_counters(int extended,
 }
 
 static int reset, reset_only, all_ports, loop_ports, port, extended, xmt_sl,
-    rcv_sl, xmt_disc, rcv_err, smpl_ctl;
+    rcv_sl, xmt_disc, rcv_err, smpl_ctl, all_hcas;
 
 static void common_func(ib_portid_t * portid, int port_num, int mask,
 			unsigned query, unsigned reset,
@@ -447,12 +447,16 @@ static int process_opt(void *context, in
 	case 'R':
 		reset_only++;
 		break;
+	case 'H':
+		all_hcas++;
+		break;
 	default:
 		return -1;
 	}
 	return 0;
 }
 
+#define MAX_NAMES 10
 int main(int argc, char **argv)
 {
 	int mgmt_classes[4] = { IB_SMI_CLASS, IB_SMI_DIRECT_CLASS, IB_SA_CLASS,
@@ -467,6 +471,10 @@ int main(int argc, char **argv)
 	int start_port = 1;
 	int enhancedport0;
 	int i;
+	int names;
+	int cur_name = 0;
+	char name_list[10][UMAD_CA_NAME_LEN];
+	umad_ca_t ca;
 
 	const struct ibdiag_opt opts[] = {
 		{"extended", 'x', 0, NULL, "show extended port counters"},
@@ -476,6 +484,7 @@ int main(int argc, char **argv)
 		{"rcverr", 'E', 0, NULL, "show Rcv Error Details"},
 		{"smplctl", 'c', 0, NULL, "show samples control"},
 		{"all_ports", 'a', 0, NULL, "show aggregated counters"},
+		{"all_hcas", 'H', 0, NULL, "iterate through all local HCAs and ports"},
 		{"loop_ports", 'l', 0, NULL, "iterate through each port"},
 		{"reset_after_read", 'r', 0, NULL, "reset counters after read"},
 		{"Reset_only", 'R', 0, NULL, "only reset counters"},
@@ -484,10 +493,12 @@ int main(int argc, char **argv)
 	char usage_args[] = " [<lid|guid> [[port] [reset_mask]]]";
 	const char *usage_examples[] = {
 		"\t\t# read local port's performance counters",
+		"-H\t\t# read performance counters on all local HCAs/ports",
 		"32 1\t\t# read performance counters from lid 32, port 1",
 		"-x 32 1\t# read extended performance counters from lid 32, port 1",
 		"-a 32\t\t# read performance counters from lid 32, all ports",
 		"-r 32 1\t# read performance counters and reset",
+		"-r -H\t\t# read and reset counters on all local HCAs/ports",
 		"-x -r 32 1\t# read extended performance counters and reset",
 		"-R 0x20 1\t# reset performance counters of port 1 only",
 		"-x -R 0x20 1\t# reset extended performance counters of port 1 only",
@@ -503,118 +514,173 @@ int main(int argc, char **argv)
 	argc -= optind;
 	argv += optind;
 
+	if (all_hcas && argc > 0)
+		IBERROR("Invalid input: all_hcas and any port/lid/guid are "
+			"not allowed together.");
+	if (all_hcas && (loop_ports || all_ports || (port==ALL_PORTS)))
+		IBERROR("Invalid input: all_hcas already goes over all ports, "
+			"but in a way that's incompatible with the all_ports "
+			"option or variants.");
+
 	if (argc > 1)
 		port = strtoul(argv[1], 0, 0);
 	if (argc > 2)
 		mask = strtoul(argv[2], 0, 0);
 
-	srcport = mad_rpc_open_port(ibd_ca, ibd_ca_port, mgmt_classes, 4);
-	if (!srcport)
-		IBERROR("Failed to open '%s' port '%d'", ibd_ca, ibd_ca_port);
-
-	if (argc) {
-		if (ib_resolve_portid_str_via(&portid, argv[0], ibd_dest_type,
-					      ibd_sm_id, srcport) < 0)
-			IBERROR("can't resolve destination port %s", argv[0]);
-	} else {
-		if (ib_resolve_self_via(&portid, &port, 0, srcport) < 0)
-			IBERROR("can't resolve self port %s", argv[0]);
-	}
+	if (all_hcas) {
+		if (umad_init() < 0)
+			IBERROR("Failed to initialize libibumad");
+		if ((names = umad_get_cas_names(name_list, 10)) < 0)
+			IBERROR("Unable to get list of HCAs");
+		/* Set up our initial hca, then at the end of the do loop
+		 * get the next one
+		 */
+		cur_name = 0;
+		if (umad_get_ca(name_list[cur_name], &ca))
+			IBERROR("Unable to get umad ca");
 
-	/* PerfMgt ClassPortInfo is a required attribute */
-	if (!pma_query_via(pc, &portid, port, ibd_timeout, CLASS_PORT_INFO,
-			   srcport))
-		IBERROR("classportinfo query");
-	/* ClassPortInfo should be supported as part of libibmad */
-	memcpy(&cap_mask, pc + 2, sizeof(cap_mask));	/* CapabilityMask */
-	cap_mask = ntohs(cap_mask);
-	if (!(cap_mask & 0x100)) {	/* bit 8 is AllPortSelect */
-		if (!all_ports && port == ALL_PORTS)
-			IBERROR("AllPortSelect not supported");
-		if (all_ports)
-			all_ports_loop = 1;
+		ibd_ca = name_list[cur_name++];
+		ibd_ca_port = start_port;
 	}
 
-	if (xmt_sl) {
-		xmt_sl_query(&portid, port, mask);
-		goto done;
-	}
+	do {
+		srcport = mad_rpc_open_port(ibd_ca, ibd_ca_port,
+					    mgmt_classes, 4);
+		if (!srcport) {
+			if (cur_name == 0)
+				IBERROR("Failed to open '%s' port '%d'",
+					ibd_ca, ibd_ca_port);
+			exit(0);
+		}
 
-	if (rcv_sl) {
-		rcv_sl_query(&portid, port, mask);
-		goto done;
-	}
+		if (argc) {
+			if (ib_resolve_portid_str_via(&portid, argv[0],
+						      ibd_dest_type,
+						      ibd_sm_id, srcport) < 0)
+				IBERROR("can't resolve destination port %s",
+					argv[0]);
+		} else {
+			if (ib_resolve_self_via(&portid, &port, 0, srcport) < 0)
+				IBERROR("can't resolve self port %s", argv[0]);
+		}
 
-	if (xmt_disc) {
-		xmt_disc_query(&portid, port, mask);
-		goto done;
-	}
+		/* PerfMgt ClassPortInfo is a required attribute */
+		if (!pma_query_via(pc, &portid, port, ibd_timeout,
+				   CLASS_PORT_INFO, srcport))
+			IBERROR("classportinfo query");
+		/* ClassPortInfo should be supported as part of libibmad */
+		memcpy(&cap_mask, pc + 2, sizeof(cap_mask));/* CapabilityMask */
+		cap_mask = ntohs(cap_mask);
+		if (!(cap_mask & 0x100)) {	/* bit 8 is AllPortSelect */
+			if (!all_ports && port == ALL_PORTS)
+				IBERROR("AllPortSelect not supported");
+			if (all_ports)
+				all_ports_loop = 1;
+		}
 
-	if (rcv_err) {
-		rcv_err_query(&portid, port, mask);
-		goto done;
-	}
+		if (xmt_sl) {
+			xmt_sl_query(&portid, port, mask);
+			goto done;
+		}
 
-	if (smpl_ctl) {
-		dump_portsamples_control(&portid, port);
-		goto done;
-	}
+		if (rcv_sl) {
+			rcv_sl_query(&portid, port, mask);
+			goto done;
+		}
+
+		if (xmt_disc) {
+			xmt_disc_query(&portid, port, mask);
+			goto done;
+		}
+
+		if (rcv_err) {
+			rcv_err_query(&portid, port, mask);
+			goto done;
+		}
 
-	if (all_ports_loop || (loop_ports && (all_ports || port == ALL_PORTS))) {
-		if (smp_query_via(data, &portid, IB_ATTR_NODE_INFO, 0, 0,
-				  srcport) < 0)
-			IBERROR("smp query nodeinfo failed");
-		node_type = mad_get_field(data, 0, IB_NODE_TYPE_F);
-		mad_decode_field(data, IB_NODE_NPORTS_F, &num_ports);
-		if (!num_ports)
-			IBERROR("smp query nodeinfo: num ports invalid");
+		if (smpl_ctl) {
+			dump_portsamples_control(&portid, port);
+			goto done;
+		}
 
-		if (node_type == IB_NODE_SWITCH) {
-			if (smp_query_via(data, &portid, IB_ATTR_SWITCH_INFO,
+		if (all_ports_loop ||
+		    (loop_ports && (all_ports || port == ALL_PORTS))) {
+			if (smp_query_via(data, &portid, IB_ATTR_NODE_INFO,
 					  0, 0, srcport) < 0)
 				IBERROR("smp query nodeinfo failed");
-			enhancedport0 =
-			    mad_get_field(data, 0, IB_SW_ENHANCED_PORT0_F);
-			if (enhancedport0)
-				start_port = 0;
+			node_type = mad_get_field(data, 0, IB_NODE_TYPE_F);
+			mad_decode_field(data, IB_NODE_NPORTS_F, &num_ports);
+			if (!num_ports)
+				IBERROR("smp query nodeinfo: num ports invalid");
+
+			if (node_type == IB_NODE_SWITCH) {
+				if (smp_query_via(data, &portid,
+						  IB_ATTR_SWITCH_INFO,
+						  0, 0, srcport) < 0)
+					IBERROR("smp query nodeinfo failed");
+				enhancedport0 =
+				    mad_get_field(data, 0,
+						  IB_SW_ENHANCED_PORT0_F);
+				if (enhancedport0)
+					start_port = 0;
+			}
+			if (all_ports_loop && !loop_ports)
+				IBWARN("Emulating AllPortSelect by iterating "
+				       "through all ports");
 		}
-		if (all_ports_loop && !loop_ports)
-			IBWARN
-			    ("Emulating AllPortSelect by iterating through all ports");
-	}
 
-	if (reset_only)
-		goto do_reset;
+		if (reset_only)
+			goto do_reset;
 
-	if (all_ports_loop || (loop_ports && (all_ports || port == ALL_PORTS))) {
-		for (i = start_port; i <= num_ports; i++)
+		if (all_ports_loop ||
+		    (loop_ports && (all_ports || port == ALL_PORTS))) {
+			for (i = start_port; i <= num_ports; i++) {
+				dump_perfcounters(extended, ibd_timeout,
+						  cap_mask, &portid, i,
+						  (all_ports_loop &&
+						   !loop_ports));
+			}
+			if (all_ports_loop && !loop_ports) {
+				if (extended != 1)
+					output_aggregate_perfcounters(&portid);
+				else
+					output_aggregate_perfcounters_ext(&portid);
+			}
+		} else
 			dump_perfcounters(extended, ibd_timeout, cap_mask,
-					  &portid, i, (all_ports_loop
-						       && !loop_ports));
-		if (all_ports_loop && !loop_ports) {
-			if (extended != 1)
-				output_aggregate_perfcounters(&portid);
-			else
-				output_aggregate_perfcounters_ext(&portid);
-		}
-	} else
-		dump_perfcounters(extended, ibd_timeout, cap_mask, &portid,
-				  port, 0);
+					  &portid, port, 0);
 
-	if (!reset)
-		goto done;
+		if (!reset)
+			goto done;
 
 do_reset:
-	if (argc <= 2 && !extended && (cap_mask & 0x1000))
-		mask |= (1 << 16);	/* reset portxmitwait */
+		if (argc <= 2 && !extended && (cap_mask & 0x1000))
+			mask |= (1 << 16);	/* reset portxmitwait */
 
-	if (all_ports_loop || (loop_ports && (all_ports || port == ALL_PORTS))) {
-		for (i = start_port; i <= num_ports; i++)
-			reset_counters(extended, ibd_timeout, mask, &portid, i);
-	} else
-		reset_counters(extended, ibd_timeout, mask, &portid, port);
+		if (all_ports_loop ||
+		    (loop_ports && (all_ports || port == ALL_PORTS))) {
+			for (i = start_port; i <= num_ports; i++)
+				reset_counters(extended, ibd_timeout, mask,
+					       &portid, i);
+		} else
+			reset_counters(extended, ibd_timeout, mask,
+				       &portid, port);
 
 done:
-	mad_rpc_close_port(srcport);
+		mad_rpc_close_port(srcport);
+		if (all_hcas) {
+			if (ibd_ca_port < ca.numports)
+				ibd_ca_port++;
+			else {
+				if (umad_get_ca(name_list[cur_name], &ca))
+					/* We're done, the next name was
+					 * empty, just exit gracefully
+					 */
+					exit(0);
+				ibd_ca = name_list[cur_name++];
+				ibd_ca_port = start_port;
+			}
+		}
+	} while (ibd_ca);
 	exit(0);
 }

Re: [Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Doug Ledford]

On 07/29/2011 05:57 PM, Doug Ledford wrote:
+				if (umad_get_ca(name_list[cur_name], &ca))
+					/* We're done, the next name was
+					 * empty, just exit gracefully
+					 */
+					exit(0);

In retrosight, this may not exit quietly.  I can't tell because the last 
adapter in my system causes the program to exit noisily right now for 
totally unrelated reasons, so if I got that fixed, I may find this isn't 
as quite of an exit as I thought.  This may need to be changed to a 
check for a NULL name instead, on NULL exit quietly, and if non-NULL 
then attempt to get it, and then on failure be noisy.

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Jason Gunthorpe]

On Fri, Jul 29, 2011 at 05:57:57PM -0400, Doug Ledford wrote:
> The -a mode of perfquery is intended to loop through all ports on a
> single HCA and provide aggregated output across all ports.
> 
> The -l mode is intended to loop through all ports of a single HCA
> and output non-aggregated data.

Actually, none of these modes are intended to support HCA scenarios,
they are all only for switches.

Not sure what I think of this, is dumping counters on all local HCA
ports really that interesting? Would this be better done by doing
something fancy with nodeGUID so at least all ports on remote HCAs can
be dumped too?

Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Doug Ledford]

On 07/29/2011 06:09 PM, Jason Gunthorpe wrote:
> On Fri, Jul 29, 2011 at 05:57:57PM -0400, Doug Ledford wrote:
>> The -a mode of perfquery is intended to loop through all ports on a
>> single HCA and provide aggregated output across all ports.
>>
>> The -l mode is intended to loop through all ports of a single HCA
>> and output non-aggregated data.
>
> Actually, none of these modes are intended to support HCA scenarios,
> they are all only for switches.

Well, they attempt to work on local HCAs if you don't specify a switch 
lid to query.  So, intended or not, they are already being attempted to 
be used in this fashion out in the field.

> Not sure what I think of this, is dumping counters on all local HCA
> ports really that interesting? Would this be better done by doing
> something fancy with nodeGUID so at least all ports on remote HCAs can
> be dumped too?

The request came in from one of our partners who wanted it for tracking 
performance stats specifically on the local machine.

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Jason Gunthorpe]

On Fri, Jul 29, 2011 at 06:14:07PM -0400, Doug Ledford wrote:
> On 07/29/2011 06:09 PM, Jason Gunthorpe wrote:
> >On Fri, Jul 29, 2011 at 05:57:57PM -0400, Doug Ledford wrote:
> >>The -a mode of perfquery is intended to loop through all ports on a
> >>single HCA and provide aggregated output across all ports.
> >>
> >>The -l mode is intended to loop through all ports of a single HCA
> >>and output non-aggregated data.
> >
> >Actually, none of these modes are intended to support HCA scenarios,
> >they are all only for switches.
> 
> Well, they attempt to work on local HCAs if you don't specify a
> switch lid to query.  So, intended or not, they are already being
> attempted to be used in this fashion out in the field.

It is just a bug perfquery tries at all, eg the ibtool version prints
"Can't fetch all ports on a CA." when asked to do that rather than
show a cryptic error.

> >Not sure what I think of this, is dumping counters on all local HCA
> >ports really that interesting? Would this be better done by doing
> >something fancy with nodeGUID so at least all ports on remote HCAs can
> >be dumped too?
> 
> The request came in from one of our partners who wanted it for
> tracking performance stats specifically on the local machine.

Well, I think it would be best to make this work generally which is
fairly hard, unfortunately.
 - If the destination is the local HCA then you have to iterate over
   all local ports with matching node GUIDs by opening devices
 - If the destination is a remote HCA then you have to query the SA
   for all nodes with a matching GUID and iterate over them. Ira has
   been working on some common code for this..
 - Maybe you want to cross product and try to query the SA attached to
   all local end ports to try and find all ports. That would actually be
   very useful for many situations I know of...

Could you make your patch just do #1 and continue to misbehave for
the other cases?

Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Doug Ledford]

[-- Attachment #1: Type: text/plain, Size: 1873 bytes --]

On 7/29/2011 6:26 PM, Jason Gunthorpe wrote:
>>> Not sure what I think of this, is dumping counters on all local HCA
>>> ports really that interesting? Would this be better done by doing
>>> something fancy with nodeGUID so at least all ports on remote HCAs can
>>> be dumped too?
>>
>> The request came in from one of our partners who wanted it for
>> tracking performance stats specifically on the local machine.
> 
> Well, I think it would be best to make this work generally which is
> fairly hard, unfortunately.
>  - If the destination is the local HCA then you have to iterate over
>    all local ports with matching node GUIDs by opening devices
>  - If the destination is a remote HCA then you have to query the SA
>    for all nodes with a matching GUID and iterate over them. Ira has
>    been working on some common code for this..
>  - Maybe you want to cross product and try to query the SA attached to
>    all local end ports to try and find all ports. That would actually be
>    very useful for many situations I know of...
> 
> Could you make your patch just do #1 and continue to misbehave for
> the other cases?

Well, it sort of already does.  The patch looks bigger than it is
because I had to re-indent in order to put the main functional code
inside of a loop.  For the most part, the loop is unchanged.  Just apply
the patch then look at what we do when all_hcas is non-0 right before
the do { and right before the } while (ibd_ca);  It iterates over all
the hca names that libibumad gives us, and then loops over all the ports
as returned by libibumad's umad_get_ca().


-- 
Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
              GPG KeyID: CFBFF194
	      http://people.redhat.com/dledford

Infiniband specific RPMs available at
	      http://people.redhat.com/dledford/Infiniband


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

Re: [Patch infiniband-diags:perfquery] Loop through all local HCAs/ports

[Ira Weiny]

On Sat, 30 Jul 2011 07:11:16 -0700
Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:

> On 7/29/2011 6:26 PM, Jason Gunthorpe wrote:
> >>> Not sure what I think of this, is dumping counters on all local HCA
> >>> ports really that interesting? Would this be better done by doing
> >>> something fancy with nodeGUID so at least all ports on remote HCAs can
> >>> be dumped too?
> >>
> >> The request came in from one of our partners who wanted it for
> >> tracking performance stats specifically on the local machine.
> > 
> > Well, I think it would be best to make this work generally which is
> > fairly hard, unfortunately.
> >  - If the destination is the local HCA then you have to iterate over
> >    all local ports with matching node GUIDs by opening devices
> >  - If the destination is a remote HCA then you have to query the SA
> >    for all nodes with a matching GUID and iterate over them. Ira has
> >    been working on some common code for this..
> >  - Maybe you want to cross product and try to query the SA attached to
> >    all local end ports to try and find all ports. That would actually be
> >    very useful for many situations I know of...
> > 
> > Could you make your patch just do #1 and continue to misbehave for
> > the other cases?
> 
> Well, it sort of already does.  The patch looks bigger than it is
> because I had to re-indent in order to put the main functional code
> inside of a loop.  For the most part, the loop is unchanged.  Just apply
> the patch then look at what we do when all_hcas is non-0 right before
> the do { and right before the } while (ibd_ca);  It iterates over all
> the hca names that libibumad gives us, and then loops over all the ports
> as returned by libibumad's umad_get_ca().

Sorry I am just getting around to this.  I think option 1 is probably a good use case as a start.

However, the bulk of the patch does not apply to the current master due to the addition of several options.

Could you rebase against the current master and resend?

Thanks,
Ira

> 
> 
> -- 
> Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>               GPG KeyID: CFBFF194
> 	      http://people.redhat.com/dledford
> 
> Infiniband specific RPMs available at
> 	      http://people.redhat.com/dledford/Infiniband
> 


-- 
Ira Weiny
Member of Technical Staff
Lawrence Livermore National Lab
925-423-8008
weiny2-i2BcT+NCU+M@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html