From: Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
To: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH] infiniband-diags/iblinkinfo.c: Changes for extended link speeds
Date: Tue, 16 Aug 2011 06:28:39 -0400 [thread overview]
Message-ID: <4E4A4657.7060705@dev.mellanox.co.il> (raw)
Signed-off-by: Hal Rosenstock <hal-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
diff --git a/src/iblinkinfo.c b/src/iblinkinfo.c
index c07d33e..b282d07 100644
--- a/src/iblinkinfo.c
+++ b/src/iblinkinfo.c
@@ -92,6 +92,8 @@ void get_msg(char *width_msg, char *speed_msg, int msg_size, ibnd_port_t * port)
{
char buf[64];
uint32_t max_speed = 0;
+ uint32_t cap_mask, rem_cap_mask;
+ uint8_t *info;
uint32_t max_width = get_max(mad_get_field(port->info, 0,
IB_PORT_LINK_WIDTH_SUPPORTED_F)
@@ -105,6 +107,21 @@ void get_msg(char *width_msg, char *speed_msg, int msg_size, ibnd_port_t * port)
mad_dump_val(IB_PORT_LINK_WIDTH_ACTIVE_F,
buf, 64, &max_width));
+ if (port->node->type == IB_NODE_SWITCH)
+ info = (uint8_t *)&port->node->ports[0]->info;
+ else
+ info = (uint8_t *)&port->info;
+ cap_mask = mad_get_field(info, 0, IB_PORT_CAPMASK_F);
+
+ if (port->remoteport->node->type == IB_NODE_SWITCH)
+ info = (uint8_t *)&port->remoteport->node->ports[0]->info;
+ else
+ info = (uint8_t *)&port->remoteport->info;
+ rem_cap_mask = mad_get_field(info, 0, IB_PORT_CAPMASK_F);
+ if (cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS &&
+ rem_cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS)
+ goto check_ext_speed;
+check_speed_supp:
max_speed = get_max(mad_get_field(port->info, 0,
IB_PORT_LINK_SPEED_SUPPORTED_F)
& mad_get_field(port->remoteport->info, 0,
@@ -116,6 +133,25 @@ void get_msg(char *width_msg, char *speed_msg, int msg_size, ibnd_port_t * port)
snprintf(speed_msg, msg_size, "Could be %s",
mad_dump_val(IB_PORT_LINK_SPEED_ACTIVE_F,
buf, 64, &max_speed));
+ return;
+
+check_ext_speed:
+ if (mad_get_field(port->info, 0,
+ IB_PORT_LINK_SPEED_EXT_SUPPORTED_F) == 0 ||
+ mad_get_field(port->remoteport->info, 0,
+ IB_PORT_LINK_SPEED_EXT_SUPPORTED_F) == 0)
+ goto check_speed_supp;
+ max_speed = get_max(mad_get_field(port->info, 0,
+ IB_PORT_LINK_SPEED_EXT_SUPPORTED_F)
+ & mad_get_field(port->remoteport->info, 0,
+ IB_PORT_LINK_SPEED_EXT_SUPPORTED_F));
+ if ((max_speed & mad_get_field(port->info, 0,
+ IB_PORT_LINK_SPEED_EXT_ACTIVE_F)) == 0)
+ // we are not at the max supported extended speed
+ // print what we could be at.
+ snprintf(speed_msg, msg_size, "Could be %s",
+ mad_dump_val(IB_PORT_LINK_SPEED_EXT_ACTIVE_F,
+ buf, 64, &max_speed));
}
int filterdownport_check(ibnd_node_t * node, ibnd_port_t * port)
@@ -151,14 +187,27 @@ void print_port(ibnd_node_t * node, ibnd_port_t * port, char *out_prefix)
char width_msg[256];
char speed_msg[256];
char ext_port_str[256];
- int iwidth, ispeed, istate, iphystate;
+ int iwidth, ispeed, espeed, istate, iphystate, cap_mask;
int n = 0;
+ uint8_t *info;
if (!port)
return;
iwidth = mad_get_field(port->info, 0, IB_PORT_LINK_WIDTH_ACTIVE_F);
ispeed = mad_get_field(port->info, 0, IB_PORT_LINK_SPEED_ACTIVE_F);
+
+ if (port->node->type == IB_NODE_SWITCH)
+ info = (uint8_t *)&port->node->ports[0]->info;
+ else
+ info = (uint8_t *)&port->info;
+ cap_mask = mad_get_field(info, 0, IB_PORT_CAPMASK_F);
+ if (cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS)
+ espeed = mad_get_field(port->info, 0,
+ IB_PORT_LINK_SPEED_EXT_ACTIVE_F);
+ else
+ espeed = 0;
+
istate = mad_get_field(port->info, 0, IB_PORT_STATE_F);
iphystate = mad_get_field(port->info, 0, IB_PORT_PHYS_STATE_F);
@@ -180,8 +229,11 @@ void print_port(ibnd_node_t * node, ibnd_port_t * port, char *out_prefix)
n = snprintf(link_str, 256, "(%3s %9s %6s/%8s)",
mad_dump_val(IB_PORT_LINK_WIDTH_ACTIVE_F, width, 64,
&iwidth),
- mad_dump_val(IB_PORT_LINK_SPEED_ACTIVE_F, speed, 64,
- &ispeed),
+ (ispeed != 4 || !espeed) ?
+ mad_dump_val(IB_PORT_LINK_SPEED_ACTIVE_F, speed, 64,
+ &ispeed) :
+ mad_dump_val(IB_PORT_LINK_SPEED_EXT_ACTIVE_F, speed, 64,
+ &espeed),
mad_dump_val(IB_PORT_STATE_F, state, 64, &istate),
mad_dump_val(IB_PORT_PHYS_STATE_F, physstate, 64,
&iphystate));
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2011-08-16 10:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-16 10:28 Hal Rosenstock [this message]
[not found] ` <4E4A4657.7060705-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2011-08-18 18:23 ` [PATCH] infiniband-diags/iblinkinfo.c: Changes for extended link speeds Ira Weiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E4A4657.7060705@dev.mellanox.co.il \
--to=hal-ldsdmyg8hgv8yrgs2mwiifqbs+8scbdb@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=weiny2-i2BcT+NCU+M@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox