From: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
David Dillow <dillowda-1Heg1YXhbW8@public.gmane.org>,
Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
Subject: [PATCH 06/20] ib_srp: Suppress superfluous error messages
Date: Thu, 09 Aug 2012 15:48:58 +0000 [thread overview]
Message-ID: <5023DBEA.9000505@acm.org> (raw)
In-Reply-To: <5023DA39.7020000-HInyCGIudOg@public.gmane.org>
Keep track of the connection state. Only report QP errors while
connected. Only invoke ib_send_cm_dreq() when connected such that
invoking srp_disconnect_target() after having received a DREQ
does not cause an error message to be printed.
Signed-off-by: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Cc: David Dillow <dillowda-1Heg1YXhbW8@public.gmane.org>
Cc: Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 43 +++++++++++++++++++++++++++-------
drivers/infiniband/ulp/srp/ib_srp.h | 1 +
2 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 35e1220..ff3e15a 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -428,17 +428,34 @@ static int srp_send_req(struct srp_target_port *target)
return status;
}
+static bool srp_change_conn_state(struct srp_target_port *target,
+ bool connected)
+{
+ bool changed = false;
+
+ spin_lock_irq(&target->lock);
+ if (target->connected != connected) {
+ target->connected = connected;
+ changed = true;
+ }
+ spin_unlock_irq(&target->lock);
+
+ return changed;
+}
+
static void srp_disconnect_target(struct srp_target_port *target)
{
- /* XXX should send SRP_I_LOGOUT request */
+ if (srp_change_conn_state(target, false)) {
+ /* XXX should send SRP_I_LOGOUT request */
- init_completion(&target->done);
- if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
- shost_printk(KERN_DEBUG, target->scsi_host,
- PFX "Sending CM DREQ failed\n");
- return;
+ init_completion(&target->done);
+ if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+ shost_printk(KERN_DEBUG, target->scsi_host,
+ PFX "Sending CM DREQ failed\n");
+ } else {
+ wait_for_completion(&target->done);
+ }
}
- wait_for_completion(&target->done);
}
static bool srp_change_state(struct srp_target_port *target,
@@ -515,6 +532,8 @@ static int srp_connect_target(struct srp_target_port *target)
int retries = 3;
int ret;
+ WARN_ON(target->connected);
+
target->qp_in_error = false;
ret = srp_lookup_path(target);
@@ -536,6 +555,7 @@ static int srp_connect_target(struct srp_target_port *target)
*/
switch (target->status) {
case 0:
+ srp_change_conn_state(target, true);
return 0;
case SRP_PORT_REDIRECT:
@@ -1265,8 +1285,11 @@ static void srp_handle_qp_err(enum ib_wc_status wc_status,
enum ib_wc_opcode wc_opcode,
struct srp_target_port *target)
{
- shost_printk(KERN_ERR, target->scsi_host, PFX "failed %s status %d\n",
- wc_opcode & IB_WC_RECV ? "receive" : "send", wc_status);
+ if (target->connected)
+ shost_printk(KERN_ERR, target->scsi_host,
+ PFX "failed %s status %d\n",
+ wc_opcode & IB_WC_RECV ? "receive" : "send",
+ wc_status);
target->qp_in_error = true;
}
@@ -1627,6 +1650,7 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
case IB_CM_DREQ_RECEIVED:
shost_printk(KERN_WARNING, target->scsi_host,
PFX "DREQ received - connection closed\n");
+ srp_change_conn_state(target, false);
if (ib_send_cm_drep(cm_id, NULL, 0))
shost_printk(KERN_ERR, target->scsi_host,
PFX "Sending CM DREP failed\n");
@@ -1941,6 +1965,7 @@ static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
spin_unlock(&host->target_lock);
target->state = SRP_TARGET_LIVE;
+ target->connected = false;
scsi_scan_target(&target->scsi_host->shost_gendev,
0, target->scsi_id, SCAN_WILD_CARD, 0);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index 02dc3ac..ef95fa4 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -163,6 +163,7 @@ struct srp_target_port {
int path_query_id;
u32 rq_tmo_jiffies;
+ bool connected;
struct ib_cm_id *cm_id;
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-08-09 15:48 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-09 15:41 [PATCH 00/20, v4] Make ib_srp better suited for H.A. purposes Bart Van Assche
2012-08-09 15:57 ` [PATCH 14/20] srp_transport: Simplify attribute initialization code Bart Van Assche
[not found] ` <5023DA39.7020000-HInyCGIudOg@public.gmane.org>
2012-08-09 15:43 ` [PATCH 01/20] ib_srp: Fix a race condition Bart Van Assche
[not found] ` <5023DAA1.1040507-HInyCGIudOg@public.gmane.org>
2012-08-14 3:19 ` David Dillow
[not found] ` <1344914386.31833.45.camel-1q1vX8mYZiGLUyTwlgNVppKKF0rrzTr+@public.gmane.org>
2012-08-14 13:21 ` Bart Van Assche
2012-08-14 13:18 ` [PATCH 01/20 v4b] " Bart Van Assche
[not found] ` <502A503D.5030604-HInyCGIudOg@public.gmane.org>
2012-08-15 0:03 ` David Dillow
2012-08-09 15:44 ` [PATCH 02/20] ib_srp: Enlarge block layer timeout Bart Van Assche
2012-08-09 15:45 ` [PATCH 03/20] ib_srp: Move QP state check into srp_send_tsk_mgmt() Bart Van Assche
2012-08-09 15:47 ` [PATCH 04/20] ib_srp: Stop queueing if QP in error Bart Van Assche
2012-08-09 15:48 ` [PATCH 05/20] ib_srp: Eliminate state SRP_TARGET_CONNECTING Bart Van Assche
2012-08-09 15:48 ` Bart Van Assche [this message]
2012-08-09 15:49 ` [PATCH 07/20] ib_srp: Avoid that SCSI error handling triggers a crash Bart Van Assche
2012-08-09 15:50 ` [PATCH 08/20] ib_srp: Introduce the helper function, srp_remove_target() Bart Van Assche
2012-08-09 15:51 ` [PATCH 09/20] ib_srp: Eliminate state SRP_TARGET_DEAD Bart Van Assche
2012-08-09 15:52 ` [PATCH 10/20] ib_srp: Keep processing commands during scsi_remove_host() Bart Van Assche
2012-08-09 15:53 ` [PATCH 11/20] ib_srp: Make srp_disconnect_target() wait for IB completions Bart Van Assche
[not found] ` <5023DCFF.4020709-HInyCGIudOg@public.gmane.org>
2012-08-23 15:59 ` Sebastian Riemer
[not found] ` <5036536B.1000003-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
2012-08-23 16:43 ` Bart Van Assche
[not found] ` <50365DC3.1050807-HInyCGIudOg@public.gmane.org>
2012-08-24 10:42 ` Dongsu Park
2012-08-09 15:54 ` [PATCH 12/20] ib_srp: Document sysfs attributes Bart Van Assche
2012-08-09 15:56 ` [PATCH 13/20] srp_transport: Fix atttribute registration Bart Van Assche
2012-08-09 15:58 ` [PATCH 15/20] srp_transport: Document sysfs attributes Bart Van Assche
2012-08-09 15:59 ` [PATCH 16/20] ib_srp: Allow SRP disconnect through sysfs Bart Van Assche
2012-08-09 16:00 ` [PATCH 17/20] ib_srp: Introduce a temporary variable in srp_remove_target() Bart Van Assche
2012-08-09 16:01 ` [PATCH 18/20] ib_srp: Maintain a single connection per I_T nexus Bart Van Assche
2012-08-09 16:02 ` [PATCH 19/20] srp_transport: Add transport layer error handling Bart Van Assche
2012-08-09 16:04 ` [PATCH 20/20] ib_srp: Add dev_loss_tmo support Bart Van Assche
2012-08-27 18:37 ` [PATCH 00/20, v4] Make ib_srp better suited for H.A. purposes Dongsu Park
2012-08-28 10:04 ` Bart Van Assche
2012-08-28 12:25 ` Dongsu Park
2012-08-28 12:58 ` Bart Van Assche
2012-09-25 15:05 ` Bart Van Assche
2012-09-27 0:31 ` David Dillow
[not found] ` <1348705896.26028.3.camel-1q1vX8mYZiGLUyTwlgNVppKKF0rrzTr+@public.gmane.org>
2012-11-23 15:07 ` Bart Van Assche
[not found] ` <50AF9146.5000405-HInyCGIudOg@public.gmane.org>
2012-11-26 4:47 ` David Dillow
2012-08-09 16:18 ` Bart Van Assche
[not found] ` <5023E2E3.4030602-HInyCGIudOg@public.gmane.org>
2012-08-11 8:29 ` Joseph Glanville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5023DBEA.9000505@acm.org \
--to=bvanassche-hinycgiudog@public.gmane.org \
--cc=dillowda-1Heg1YXhbW8@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).