From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hal Rosenstock Subject: Re: [PATCH 1/2] opensm/osm_console.c: Support portstatus output for unenabled width/speed Date: Thu, 28 Feb 2013 10:34:49 -0500 Message-ID: <512F7919.7090009@dev.mellanox.co.il> References: <1361915680.28997.11.camel@auk59.llnl.gov> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1361915680.28997.11.camel-akkeaxHeDKRliZ7u+bvwcg@public.gmane.org> Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Albert Chu Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rdma@vger.kernel.org On 2/26/2013 4:54 PM, Albert Chu wrote: > On occasion, it has been observed that active link width and/or speed > is set at a level not enabled. For example, a link may be active at > QDR but SDR & DDR speeds are the only ones enabled. > > Under these scenarios, the portstatus option in the console may > incorrectly output port status, which can confuse users. > > A new port output status of "unenabled width" or "unenabled speed" is > output when this situation is discovered, helping users find problems > in the fabric. > > Signed-off-by: Albert Chu Thanks. Applied. -- Hal -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html