public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: zhenwei pi <zhenwei.pi@linux.dev>,
	linux-kernel@vger.kernel.org, linux-rdma@vger.kernel.org,
	"yanjun.zhu@linux.dev" <yanjun.zhu@linux.dev>
Cc: zyjzyj2000@gmail.com, jgg@ziepe.ca, leon@kernel.org
Subject: Re: [PATCH v3 3/3] RDMA/rxe: support perf mgmt GET method
Date: Sun, 29 Mar 2026 00:03:53 -0700	[thread overview]
Message-ID: <513bf712-3aae-4998-8879-314d9293c2a4@linux.dev> (raw)
In-Reply-To: <20260329054156.125362-4-zhenwei.pi@linux.dev>

在 2026/3/28 22:41, zhenwei pi 写道:
> In RXE, hardware counters are already supported, but not in a
> standardized manner. For instance, user-space monitoring tools like
> atop only read from the *counters* directory. Therefore, it is
> necessary to add perf management support to RXE.
> 
> Also use rxe_counter_get instead of raw atomic64_read in hw-counters.
> 

Thanks a lot.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>

Zhu Yanjun

> Signed-off-by: zhenwei pi <zhenwei.pi@linux.dev>
> ---
>   drivers/infiniband/sw/rxe/Makefile          |  1 +
>   drivers/infiniband/sw/rxe/rxe_hw_counters.c |  2 +-
>   drivers/infiniband/sw/rxe/rxe_loc.h         |  6 ++
>   drivers/infiniband/sw/rxe/rxe_mad.c         | 93 +++++++++++++++++++++
>   drivers/infiniband/sw/rxe/rxe_verbs.c       |  1 +
>   drivers/infiniband/sw/rxe/rxe_verbs.h       |  5 ++
>   6 files changed, 107 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/infiniband/sw/rxe/rxe_mad.c
> 
> diff --git a/drivers/infiniband/sw/rxe/Makefile b/drivers/infiniband/sw/rxe/Makefile
> index 93134f1d1d0c..3c47e5b982c2 100644
> --- a/drivers/infiniband/sw/rxe/Makefile
> +++ b/drivers/infiniband/sw/rxe/Makefile
> @@ -22,6 +22,7 @@ rdma_rxe-y := \
>   	rxe_mcast.o \
>   	rxe_task.o \
>   	rxe_net.o \
> +	rxe_mad.o \
>   	rxe_hw_counters.o
>   
>   rdma_rxe-$(CONFIG_INFINIBAND_ON_DEMAND_PAGING) += rxe_odp.o
> diff --git a/drivers/infiniband/sw/rxe/rxe_hw_counters.c b/drivers/infiniband/sw/rxe/rxe_hw_counters.c
> index 17edaa9a9b9b..a612e96f7a88 100644
> --- a/drivers/infiniband/sw/rxe/rxe_hw_counters.c
> +++ b/drivers/infiniband/sw/rxe/rxe_hw_counters.c
> @@ -37,7 +37,7 @@ int rxe_ib_get_hw_stats(struct ib_device *ibdev,
>   		return -EINVAL;
>   
>   	for (cnt = 0; cnt < ARRAY_SIZE(rxe_counter_descs); cnt++)
> -		stats->value[cnt] = atomic64_read(&dev->stats_counters[cnt]);
> +		stats->value[cnt] = rxe_counter_get(dev, cnt);
>   
>   	return ARRAY_SIZE(rxe_counter_descs);
>   }
> diff --git a/drivers/infiniband/sw/rxe/rxe_loc.h b/drivers/infiniband/sw/rxe/rxe_loc.h
> index 7992290886e1..a8ce85147c1f 100644
> --- a/drivers/infiniband/sw/rxe/rxe_loc.h
> +++ b/drivers/infiniband/sw/rxe/rxe_loc.h
> @@ -245,4 +245,10 @@ static inline int rxe_ib_advise_mr(struct ib_pd *pd,
>   
>   #endif /* CONFIG_INFINIBAND_ON_DEMAND_PAGING */
>   
> +/* rxe-mad.c */
> +int rxe_process_mad(struct ib_device *ibdev, int mad_flags, u32 port_num,
> +		    const struct ib_wc *in_wc, const struct ib_grh *in_grh,
> +		    const struct ib_mad *in, struct ib_mad *out,
> +		    size_t *out_mad_size, u16 *out_mad_pkey_index);
> +
>   #endif /* RXE_LOC_H */
> diff --git a/drivers/infiniband/sw/rxe/rxe_mad.c b/drivers/infiniband/sw/rxe/rxe_mad.c
> new file mode 100644
> index 000000000000..f41b8d5cdfe1
> --- /dev/null
> +++ b/drivers/infiniband/sw/rxe/rxe_mad.c
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
> +/*
> + * Copyright (c) 2026 zhenwei pi <zhenwei.pi@linux.dev>
> + */
> +
> +#include <rdma/ib_pma.h>
> +#include "rxe.h"
> +#include "rxe_hw_counters.h"
> +
> +static int rxe_get_pma_info(struct ib_mad *out)
> +{
> +	struct ib_class_port_info cpi = {};
> +
> +	cpi.capability_mask = IB_PMA_CLASS_CAP_EXT_WIDTH;
> +	memcpy((out->data + 40), &cpi, sizeof(cpi));
> +
> +	return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
> +}
> +
> +static int rxe_get_pma_counters(struct rxe_dev *rxe, struct ib_mad *out)
> +{
> +	struct ib_pma_portcounters *pma_cnt = (struct ib_pma_portcounters *)(out->data + 40);
> +	s64 val;
> +
> +	/* IBA release 1.8, 16.1.3.5: During operation, instead of overflowing, they shall stop
> +	 * at all ones.
> +	 */
> +	val = rxe_counter_get(rxe, RXE_CNT_LINK_DOWNED);
> +	if (val > U8_MAX)
> +		pma_cnt->link_downed_counter = U8_MAX;
> +	else
> +		pma_cnt->link_downed_counter = (u8)val;
> +
> +	return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
> +}
> +
> +static int rxe_get_pma_counters_ext(struct rxe_dev *rxe, struct ib_mad *out)
> +{
> +	struct ib_pma_portcounters_ext *pma_cnt_ext =
> +		(struct ib_pma_portcounters_ext *)(out->data + 40);
> +
> +	pma_cnt_ext->port_xmit_data = cpu_to_be64(rxe_counter_get(rxe, RXE_CNT_SENT_BYTES) >> 2);
> +	pma_cnt_ext->port_rcv_data = cpu_to_be64(rxe_counter_get(rxe, RXE_CNT_RCVD_BYTES) >> 2);
> +	pma_cnt_ext->port_xmit_packets = cpu_to_be64(rxe_counter_get(rxe, RXE_CNT_SENT_PKTS));
> +	pma_cnt_ext->port_rcv_packets = cpu_to_be64(rxe_counter_get(rxe, RXE_CNT_RCVD_PKTS));
> +
> +	return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
> +}
> +
> +static int rxe_get_perf_mgmt(struct rxe_dev *rxe, const struct ib_mad *in, struct ib_mad *out)
> +{
> +	switch (in->mad_hdr.attr_id) {
> +	case IB_PMA_CLASS_PORT_INFO:
> +		return rxe_get_pma_info(out);
> +
> +	case IB_PMA_PORT_COUNTERS:
> +		return rxe_get_pma_counters(rxe, out);
> +
> +	case IB_PMA_PORT_COUNTERS_EXT:
> +		return rxe_get_pma_counters_ext(rxe, out);
> +
> +	default:
> +		out->mad_hdr.status = cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD_ATTRIB);
> +		return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
> +	}
> +}
> +
> +int rxe_process_mad(struct ib_device *ibdev, int mad_flags, u32 port_num,
> +		    const struct ib_wc *in_wc, const struct ib_grh *in_grh,
> +		    const struct ib_mad *in, struct ib_mad *out,
> +		    size_t *out_mad_size, u16 *out_mad_pkey_index)
> +{
> +	struct rxe_dev *rxe = to_rdev(ibdev);
> +	u8 mgmt_class = in->mad_hdr.mgmt_class;
> +	u8 method = in->mad_hdr.method;
> +
> +	if (port_num != RXE_PORT)
> +		return IB_MAD_RESULT_FAILURE;
> +
> +	memset(out, 0, sizeof(*out));
> +	switch (mgmt_class) {
> +	case IB_MGMT_CLASS_PERF_MGMT:
> +		if (method == IB_MGMT_METHOD_GET)
> +			return rxe_get_perf_mgmt(rxe, in, out);
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	out->mad_hdr.status = cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD);
> +	return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
> +}
> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
> index bcd486e8668b..7df0cb5a09a3 100644
> --- a/drivers/infiniband/sw/rxe/rxe_verbs.c
> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
> @@ -1509,6 +1509,7 @@ static const struct ib_device_ops rxe_dev_ops = {
>   	.post_recv = rxe_post_recv,
>   	.post_send = rxe_post_send,
>   	.post_srq_recv = rxe_post_srq_recv,
> +	.process_mad = rxe_process_mad,
>   	.query_ah = rxe_query_ah,
>   	.query_device = rxe_query_device,
>   	.query_pkey = rxe_query_pkey,
> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
> index 2bcfb919a40b..1c4fa8eaa733 100644
> --- a/drivers/infiniband/sw/rxe/rxe_verbs.h
> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
> @@ -466,6 +466,11 @@ static inline void rxe_counter_add(struct rxe_dev *rxe, enum rxe_counters index,
>   	atomic64_add(val, &rxe->stats_counters[index]);
>   }
>   
> +static inline s64 rxe_counter_get(struct rxe_dev *rxe, enum rxe_counters index)
> +{
> +	return atomic64_read(&rxe->stats_counters[index]);
> +}
> +
>   static inline struct rxe_dev *to_rdev(struct ib_device *dev)
>   {
>   	return dev ? container_of(dev, struct rxe_dev, ib_dev) : NULL;


      reply	other threads:[~2026-03-29  7:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-29  5:41 [PATCH v3 0/3] Support PERF MGMT for RXE zhenwei pi
2026-03-29  5:41 ` [PATCH v3 1/3] RDMA/rxe: use RXE_PORT instead of magic number 1 zhenwei pi
2026-03-29  7:01   ` Zhu Yanjun
2026-03-29  5:41 ` [PATCH v3 2/3] RDMA/rxe: add SENT/RCVD bytes zhenwei pi
2026-03-29  7:01   ` Zhu Yanjun
2026-03-29  5:41 ` [PATCH v3 3/3] RDMA/rxe: support perf mgmt GET method zhenwei pi
2026-03-29  7:03   ` Zhu Yanjun [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=513bf712-3aae-4998-8879-314d9293c2a4@linux.dev \
    --to=yanjun.zhu@linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=leon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=zhenwei.pi@linux.dev \
    --cc=zyjzyj2000@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox