From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bart Van Assche Subject: [PATCH v2 0/15] IB SRP initiator patches for kernel 3.11 Date: Fri, 28 Jun 2013 14:45:30 +0200 Message-ID: <51CD856A.3010102@acm.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Roland Dreier , David Dillow , Vu Pham , Sebastian Riemer , linux-rdma , linux-scsi List-Id: linux-rdma@vger.kernel.org The purpose of this InfiniBand SRP initiator patch series is as follows: - Make the SRP initiator driver better suited for use in a H.A. setup. Speed up failover by reducing the IB RC retry count and by notifying multipathd faster about transport layer failures by adding fast_io_fail_tmo and dev_loss_tmo parameters. - Make the SRP initiator better suited for use on NUMA systems by making the HCA completion vector configurable. Changes since the v1 of the "IB SRP initiator patches for kernel 3.11" patch series: - scsi_transport_srp: Allowed both fast_io_fail and dev_loss timeouts to be disabled. - scsi_transport_srp, srp_reconnect_rport(): switched from scsi_block_requests() to scsi_target_block() for blocking SCSI command processing temporarily. - scsi_transport_srp, srp_start_tl_fail_timers(): only block SCSI device command processing if the fast_io_fail timer is enabled. - Changed srp_abort() such that upon transport offline the value FAST_IO_FAIL is returned instead of SUCCESS. - Fixed a race condition in the "maintain single connection" patch: a new login after removal had started but before removal had finished still could create a duplicate connection. Fixed this by deferring removal from the target list until removal has finished. - Modified the error message in the same patch for reporting that a duplicate connection has been rejected. - Modified patch 2/15 such that all possible race conditions with srp_claim_req() are addressed. - Documented the comp_vector and tl_retry_count login string parameters. - Updated dev_loss_tmo and fast_io_fail_tmo documentation - mentioned "off" is a valid choice. Changes compared to v5 of the "Make ib_srp better suited for H.A. purposes" patch series: - Left out patches that are already upstream. - Made it possible to set dev_loss_tmo to "off". This is useful in a setup using initiator side mirroring to avoid that new /dev/sd* names are reassigned after a failover or cable pull and reinsert. - Added kernel module parameters to ib_srp for configuring default values of the fast_io_fail_tmo and dev_loss_tmo parameters. - Added a patch from Dotan Barak that fixes a kernel oops during rmmod triggered by resource allocation failure at module load time. - Avoid duplicate connections by refusing relogins instead of dropping duplicate connections, as proposed by Sebastian Riemer. - Added a patch from Sebastian Riemer for failing SCSI commands silently. - Added a patch from Vu Pham to make the transport layer (IB RC) retry count configurable. - Made HCA completion vector configurable. Changes since v4: - Added a patch for removing SCSI devices upon a port down event Changes since v3: - Restored the dev_loss_tmo and fast_io_fail_tmo sysfs attributes. - Included a patch to fix an ib_srp crash that could be triggered by cable pulling. Changes since v2: - Addressed the v2 review comments. - Dropped the patches that have already been merged. - Dropped the patches for integration with multipathd. - Dropped the micro-optimization of the IB completion handlers. The individual patches in this series are as follows: 0001-IB-srp-Fix-remove_one-crash-due-to-resource-exhausti.patch 0002-IB-srp-Fix-race-between-srp_queuecommand-and-srp_cla.patch 0003-IB-srp-Avoid-that-srp_reset_host-is-skipped-after-a-.patch 0004-IB-srp-Fail-I-O-fast-if-target-offline.patch 0005-IB-srp-Skip-host-settle-delay.patch 0006-IB-srp-Maintain-a-single-connection-per-I_T-nexus.patch 0007-IB-srp-Keep-rport-as-long-as-the-IB-transport-layer.patch 0008-scsi_transport_srp-Add-transport-layer-error-handlin.patch 0009-IB-srp-Add-srp_terminate_io.patch 0010-IB-srp-Use-SRP-transport-layer-error-recovery.patch 0011-IB-srp-Start-timers-if-a-transport-layer-error-occur.patch 0012-IB-srp-Fail-SCSI-commands-silently.patch 0013-IB-srp-Make-HCA-completion-vector-configurable.patch 0014-IB-srp-Make-transport-layer-retry-count-configurable.patch 0015-IB-srp-Bump-driver-version-and-release-date.patch -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html