From: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
To: Roland Dreier <roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Yann Droneaud <ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org>,
Alex Chiang <achiang-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>,
linux-rdma <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH v3 2/2] IB/umad: Fix a use-after-free
Date: Fri, 16 May 2014 13:05:44 +0200 [thread overview]
Message-ID: <5375F108.20608@acm.org> (raw)
In-Reply-To: <5375F094.30809-HInyCGIudOg@public.gmane.org>
Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n>
triggers a use-after-free. __fput() in fs/file_table.c invokes
f_op->release() before it invokes cdev_put(). Make sure that the
ib_umad_device structure is freed by the cdev_put() call instead of
f_op->release(). This avoids that changing the port mode from IB into
Ethernet and back to IB followed by restarting opensmd triggers the
following kernel oops:
general protection fault: 0000 [#1] PREEMPT SMP
RIP: 0010:[<ffffffff810cc65c>] [<ffffffff810cc65c>] module_put+0x2c/0x170
Call Trace:
[<ffffffff81190f20>] cdev_put+0x20/0x30
[<ffffffff8118e2ce>] __fput+0x1ae/0x1f0
[<ffffffff8118e35e>] ____fput+0xe/0x10
[<ffffffff810723bc>] task_work_run+0xac/0xe0
[<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0
[<ffffffff814b8398>] int_signal+0x12/0x17
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051
Signed-off-by: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Cc: Alex Chiang <achiang-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Cc: Yann Droneaud <ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org>
Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
---
drivers/infiniband/core/user_mad.c | 30 +++++++++++++++++++-----------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 2b3dfcc..4ac0d42 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -98,7 +98,7 @@ struct ib_umad_port {
struct ib_umad_device {
int start_port, end_port;
- struct kref ref;
+ struct kobject kobj;
struct ib_umad_port port[0];
};
@@ -134,14 +134,18 @@ static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS);
static void ib_umad_add_one(struct ib_device *device);
static void ib_umad_remove_one(struct ib_device *device);
-static void ib_umad_release_dev(struct kref *ref)
+static void ib_umad_release_dev(struct kobject *kobj)
{
struct ib_umad_device *dev =
- container_of(ref, struct ib_umad_device, ref);
+ container_of(kobj, struct ib_umad_device, kobj);
kfree(dev);
}
+static struct kobj_type ib_umad_dev_ktype = {
+ .release = ib_umad_release_dev,
+};
+
static int hdr_size(struct ib_umad_file *file)
{
return file->use_pkey_index ? sizeof (struct ib_user_mad_hdr) :
@@ -810,7 +814,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp)
if (ret)
goto del;
- kref_get(&port->umad_dev->ref);
+ kobject_get(&port->umad_dev->kobj);
out:
mutex_unlock(&port->file_mutex);
@@ -855,7 +859,7 @@ static int ib_umad_close(struct inode *inode, struct file *filp)
mutex_unlock(&file->port->file_mutex);
kfree(file);
- kref_put(&dev->ref, ib_umad_release_dev);
+ kobject_put(&dev->kobj);
return 0;
}
@@ -906,7 +910,7 @@ static int ib_umad_sm_open(struct inode *inode, struct file *filp)
if (ret)
goto clr_sm_cap;
- kref_get(&port->umad_dev->ref);
+ kobject_get(&port->umad_dev->kobj);
out:
return ret;
@@ -935,7 +939,7 @@ static int ib_umad_sm_close(struct inode *inode, struct file *filp)
up(&port->sm_sem);
- kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&port->umad_dev->kobj);
return ret;
}
@@ -1003,6 +1007,7 @@ static int find_overflow_devnum(void)
}
static int ib_umad_init_port(struct ib_device *device, int port_num,
+ struct ib_umad_device *umad_dev,
struct ib_umad_port *port)
{
int devnum;
@@ -1035,6 +1040,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num,
cdev_init(&port->cdev, &umad_fops);
port->cdev.owner = THIS_MODULE;
+ port->cdev.kobj.parent = &umad_dev->kobj;
kobject_set_name(&port->cdev.kobj, "umad%d", port->dev_num);
if (cdev_add(&port->cdev, base, 1))
goto err_cdev;
@@ -1053,6 +1059,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num,
base += IB_UMAD_MAX_PORTS;
cdev_init(&port->sm_cdev, &umad_sm_fops);
port->sm_cdev.owner = THIS_MODULE;
+ port->sm_cdev.kobj.parent = &umad_dev->kobj;
kobject_set_name(&port->sm_cdev.kobj, "issm%d", port->dev_num);
if (cdev_add(&port->sm_cdev, base, 1))
goto err_sm_cdev;
@@ -1146,7 +1153,7 @@ static void ib_umad_add_one(struct ib_device *device)
if (!umad_dev)
return;
- kref_init(&umad_dev->ref);
+ kobject_init(&umad_dev->kobj, &ib_umad_dev_ktype);
umad_dev->start_port = s;
umad_dev->end_port = e;
@@ -1154,7 +1161,8 @@ static void ib_umad_add_one(struct ib_device *device)
for (i = s; i <= e; ++i) {
umad_dev->port[i - s].umad_dev = umad_dev;
- if (ib_umad_init_port(device, i, &umad_dev->port[i - s]))
+ if (ib_umad_init_port(device, i, umad_dev,
+ &umad_dev->port[i - s]))
goto err;
}
@@ -1166,7 +1174,7 @@ err:
while (--i >= s)
ib_umad_kill_port(&umad_dev->port[i - s]);
- kref_put(&umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&umad_dev->kobj);
}
static void ib_umad_remove_one(struct ib_device *device)
@@ -1180,7 +1188,7 @@ static void ib_umad_remove_one(struct ib_device *device)
for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i)
ib_umad_kill_port(&umad_dev->port[i]);
- kref_put(&umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&umad_dev->kobj);
}
static char *umad_devnode(struct device *dev, umode_t *mode)
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-05-16 11:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 8:29 [PATCH 0/3] Fix a use-after-free in ib_umad Bart Van Assche
[not found] ` <53708666.6060209-HInyCGIudOg@public.gmane.org>
2014-05-12 8:30 ` [PATCH 1/3] IB/umad: Remove container_of() != NULL tests Bart Van Assche
[not found] ` <5370869F.5040103-HInyCGIudOg@public.gmane.org>
2014-05-12 10:04 ` Yann Droneaud
[not found] ` <1399889097.3017.1.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-05-12 10:36 ` Bart Van Assche
[not found] ` <5370A41F.8050001-HInyCGIudOg@public.gmane.org>
2014-05-12 12:40 ` Yann Droneaud
2014-05-12 8:30 ` [PATCH 2/3] IB/umad: Fix error handling Bart Van Assche
[not found] ` <537086BA.3020807-HInyCGIudOg@public.gmane.org>
2014-05-12 10:18 ` Yann Droneaud
[not found] ` <1399889890.3017.6.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-05-12 10:32 ` Bart Van Assche
[not found] ` <5370A323.5000504-HInyCGIudOg@public.gmane.org>
2014-05-12 12:35 ` Yann Droneaud
2014-05-16 11:03 ` [PATCH v3 0/2] Fix a use-after-free in ib_umad Bart Van Assche
[not found] ` <5375F094.30809-HInyCGIudOg@public.gmane.org>
2014-05-16 11:04 ` [PATCH v3 1/2] IB/umad: Fix error handling Bart Van Assche
[not found] ` <5375F0CD.5080809-HInyCGIudOg@public.gmane.org>
2014-05-20 8:33 ` [PATCH v3.1] " Yann Droneaud
[not found] ` <1400574821-9562-1-git-send-email-ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org>
2014-05-20 11:25 ` Bart Van Assche
[not found] ` <537B3BBE.4040202-HInyCGIudOg@public.gmane.org>
2014-05-20 11:39 ` Yann Droneaud
2014-05-16 11:05 ` Bart Van Assche [this message]
[not found] ` <5375F108.20608-HInyCGIudOg@public.gmane.org>
2014-05-16 12:28 ` [PATCH v3 2/2] IB/umad: Fix a use-after-free Yann Droneaud
2014-06-06 16:25 ` [RESEND PATCH] " Yann Droneaud
[not found] ` <1402071904-25003-1-git-send-email-ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org>
2014-06-06 18:39 ` Roland Dreier
2014-05-12 8:31 ` [PATCH 3/3] " Bart Van Assche
2014-05-12 9:17 ` [PATCH 1/3] IB/umad: Remove container_of() != NULL tests Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5375F108.20608@acm.org \
--to=bvanassche-hinycgiudog@public.gmane.org \
--cc=achiang-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).