From: Erez Shitrit <erezsh-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
To: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 1/1] IPoIB: Improve parent interface p_key handling.
Date: Mon, 16 Jun 2014 09:57:05 +0300 [thread overview]
Message-ID: <539E9541.9000505@dev.mellanox.co.il> (raw)
In-Reply-To: <20140611192132.31937.30869.stgit-u2TXY/5TJkdZ7WVY1cDZ9q2pdiUAq4bhAL8bYrjMMd8@public.gmane.org>
6/11/2014 10:22 PM, Alex Estrin:
> With reference to commit c2904141696ee19551f1553944446f23cdd5d95e
> (IPoIB: Fix pkey change flow for virtualization environments)
> It was noticed that parent interface keeps sending broadcast group
> join requests if p_key index 0 is invalid. That creates unnecessary
> noise on a fabric:
>
> ib0: multicast join failed for ff12:401b:8000:0000:0000:0000:ffff:ffff,
> status -22
>
> Proposed patch re-init resources, then brings interface
> up only if p_key idx 0 is valid either on bootup or on PKEY_CHANGE event.
> Original code could run multicast task regardless of p_key value,
> which we want to avoid.
>
> Reviewed-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Acked-by: Erez Shitrit <erezsh-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
> ---
> drivers/infiniband/ulp/ipoib/ipoib_ib.c | 35 +++++++++++++++++++------------
> 1 files changed, 21 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
> index 6a7003d..a2af996 100644
> --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
> +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
> @@ -52,6 +52,7 @@ MODULE_PARM_DESC(data_debug_level,
> #endif
>
> static DEFINE_MUTEX(pkey_mutex);
> +static void ipoib_pkey_dev_check_presence(struct net_device *dev);
>
> struct ipoib_ah *ipoib_create_ah(struct net_device *dev,
> struct ib_pd *pd, struct ib_ah_attr *attr)
> @@ -669,12 +670,13 @@ int ipoib_ib_dev_open(struct net_device *dev)
> struct ipoib_dev_priv *priv = netdev_priv(dev);
> int ret;
>
> - if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &priv->pkey_index)) {
> - ipoib_warn(priv, "P_Key 0x%04x not found\n", priv->pkey);
> - clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
> + ipoib_pkey_dev_check_presence(dev);
> +
> + if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) {
> + ipoib_warn(priv, "P_Key 0x%04x is %s\n", priv->pkey,
> + !(priv->pkey & 0x7fff) ? "Invalid" : "not found");
> return -1;
> }
> - set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
>
> ret = ipoib_init_qp(dev);
> if (ret) {
> @@ -712,9 +714,10 @@ dev_stop:
> static void ipoib_pkey_dev_check_presence(struct net_device *dev)
> {
> struct ipoib_dev_priv *priv = netdev_priv(dev);
> - u16 pkey_index = 0;
>
> - if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index))
> + if (!(priv->pkey & 0x7fff) ||
> + ib_find_pkey(priv->ca, priv->port, priv->pkey,
> + &priv->pkey_index))
> clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
> else
> set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
> @@ -987,15 +990,17 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
> up_read(&priv->vlan_rwsem);
>
> if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) {
> - /* for non-child devices must check/update the pkey value here */
> - if (level == IPOIB_FLUSH_HEAVY &&
> - !test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags))
> - update_parent_pkey(priv);
> - ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
> - return;
> + if (level != IPOIB_FLUSH_HEAVY) {
> + ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
> + return;
> + }
> }
>
> if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) {
> + /* interface is down. update pkey and leave. */
> + if (level == IPOIB_FLUSH_HEAVY &&
> + !test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags))
> + update_parent_pkey(priv);
> ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_ADMIN_UP not set.\n");
> return;
> }
> @@ -1038,8 +1043,10 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
> ipoib_ib_dev_down(dev, 0);
>
> if (level == IPOIB_FLUSH_HEAVY) {
> - ipoib_ib_dev_stop(dev, 0);
> - ipoib_ib_dev_open(dev);
> + if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
> + ipoib_ib_dev_stop(dev, 0);
> + if (ipoib_ib_dev_open(dev) != 0)
> + return;
> }
>
> /*
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-06-16 6:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-11 19:21 [PATCH v3 0/1] IPoIB: Improve parent interface p_key handling Alex Estrin
[not found] ` <20140611191947.31937.75434.stgit-u2TXY/5TJkdZ7WVY1cDZ9q2pdiUAq4bhAL8bYrjMMd8@public.gmane.org>
2014-06-11 19:22 ` [PATCH v3 1/1] " Alex Estrin
[not found] ` <20140611192132.31937.30869.stgit-u2TXY/5TJkdZ7WVY1cDZ9q2pdiUAq4bhAL8bYrjMMd8@public.gmane.org>
2014-06-16 6:57 ` Erez Shitrit [this message]
2014-06-17 6:02 ` Or Gerlitz
[not found] ` <539FD9EA.8030301-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2014-06-17 13:11 ` Estrin, Alex
-- strict thread matches above, loose matches on Subject: below --
2014-06-11 18:33 Alex Estrin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=539E9541.9000505@dev.mellanox.co.il \
--to=erezsh-ldsdmyg8hgv8yrgs2mwiifqbs+8scbdb@public.gmane.org \
--cc=alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox