From: Shirley Ma <shirley.ma-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v2 15/21] xprtrdma: Disable completions for LOCAL_INV Work Requests
Date: Thu, 10 Jul 2014 08:48:24 -0700 [thread overview]
Message-ID: <53BEB5C8.4070709@oracle.com> (raw)
In-Reply-To: <20140709165838.3496.17169.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
That would significantly reduce the interrupts rate. I will run some performance test.
Would these unsignaled SENDs be possible to stall?
Shirley
On 07/09/2014 09:58 AM, Chuck Lever wrote:
> Instead of relying on a completion to change the state of an FRMR
> to FRMR_IS_INVALID, set it in advance. If an error occurs, a completion
> will fire anyway and mark the FRMR FRMR_IS_STALE.
>
> Signed-off-by: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
> ---
> net/sunrpc/xprtrdma/verbs.c | 17 ++++++++---------
> 1 file changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
> index e83eda6..8eef343 100644
> --- a/net/sunrpc/xprtrdma/verbs.c
> +++ b/net/sunrpc/xprtrdma/verbs.c
> @@ -154,12 +154,8 @@ rpcrdma_sendcq_process_wc(struct ib_wc *wc)
>
> if (wc->wr_id == 0ULL)
> return;
> - if (wc->status != IB_WC_SUCCESS) {
> + if (wc->status != IB_WC_SUCCESS)
> frmr->r.frmr.fr_state = FRMR_IS_STALE;
> - return;
> - }
> -
> - frmr->r.frmr.fr_state = FRMR_IS_INVALID;
> }
>
> static int
> @@ -1369,12 +1365,11 @@ rpcrdma_retry_local_inv(struct rpcrdma_mw *r, struct rpcrdma_ia *ia)
> dprintk("RPC: %s: FRMR %p is stale\n", __func__, r);
>
> /* When this FRMR is re-inserted into rb_mws, it is no longer stale */
> - r->r.frmr.fr_state = FRMR_IS_VALID;
> + r->r.frmr.fr_state = FRMR_IS_INVALID;
>
> memset(&invalidate_wr, 0, sizeof(invalidate_wr));
> invalidate_wr.wr_id = (unsigned long)(void *)r;
> invalidate_wr.opcode = IB_WR_LOCAL_INV;
> - invalidate_wr.send_flags = IB_SEND_SIGNALED;
> invalidate_wr.ex.invalidate_rkey = r->r.frmr.fr_mr->rkey;
> DECR_CQCOUNT(&r_xprt->rx_ep);
>
> @@ -1787,10 +1782,11 @@ rpcrdma_deregister_frmr_external(struct rpcrdma_mr_seg *seg,
> struct ib_send_wr invalidate_wr, *bad_wr;
> int rc;
>
> + seg1->mr_chunk.rl_mw->r.frmr.fr_state = FRMR_IS_INVALID;
> +
> memset(&invalidate_wr, 0, sizeof invalidate_wr);
> invalidate_wr.wr_id = (unsigned long)(void *)seg1->mr_chunk.rl_mw;
> invalidate_wr.opcode = IB_WR_LOCAL_INV;
> - invalidate_wr.send_flags = IB_SEND_SIGNALED;
> invalidate_wr.ex.invalidate_rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey;
> DECR_CQCOUNT(&r_xprt->rx_ep);
>
> @@ -1799,9 +1795,12 @@ rpcrdma_deregister_frmr_external(struct rpcrdma_mr_seg *seg,
> rpcrdma_unmap_one(ia, seg++);
> rc = ib_post_send(ia->ri_id->qp, &invalidate_wr, &bad_wr);
> read_unlock(&ia->ri_qplock);
> - if (rc)
> + if (rc) {
> + /* Force rpcrdma_buffer_get() to retry */
> + seg1->mr_chunk.rl_mw->r.frmr.fr_state = FRMR_IS_STALE;
> dprintk("RPC: %s: failed ib_post_send for invalidate,"
> " status %i\n", __func__, rc);
> + }
> return rc;
> }
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-07-10 15:48 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-09 16:56 [PATCH v2 00/21] NFS/RDMA client patches for 3.17 Chuck Lever
[not found] ` <20140709163326.3496.37893.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2014-07-09 16:56 ` [PATCH v2 01/21] xprtrdma: Fix panic in rpcrdma_register_frmr_external() Chuck Lever
2014-07-09 16:56 ` [PATCH v2 02/21] xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs Chuck Lever
2014-07-09 16:56 ` [PATCH v2 03/21] xprtrdma: Limit data payload size for ALLPHYSICAL Chuck Lever
2014-07-09 16:57 ` [PATCH v2 04/21] xprtrdma: Update rkeys after transport reconnect Chuck Lever
2014-07-09 16:57 ` [PATCH v2 05/21] xprtrdma: On disconnect, don't ignore pending CQEs Chuck Lever
[not found] ` <20140709165713.3496.64777.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2014-07-09 21:28 ` Shirley Ma
[not found] ` <53BDB3EE.8060509-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-07-09 21:39 ` Chuck Lever
2014-07-09 16:57 ` [PATCH v2 06/21] xprtrdma: Don't invalidate FRMRs if registration fails Chuck Lever
2014-07-09 16:57 ` [PATCH v2 07/21] xprtrdma: Unclutter struct rpcrdma_mr_seg Chuck Lever
2014-07-09 16:57 ` [PATCH v2 08/21] xprtrdma: Back off rkey when FAST_REG_MR fails Chuck Lever
[not found] ` <20140709165739.3496.39485.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2014-07-09 20:07 ` Anna Schumaker
[not found] ` <53BDA10B.6030506-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org>
2014-07-09 20:27 ` Chuck Lever
2014-07-09 16:57 ` [PATCH v2 09/21] xprtrdma: Chain together all MWs in same buffer pool Chuck Lever
2014-07-09 16:57 ` [PATCH v2 10/21] xprtrdma: Properly handle exhaustion of the rb_mws list Chuck Lever
2014-07-09 16:58 ` [PATCH v2 11/21] xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect Chuck Lever
2014-07-09 16:58 ` [PATCH v2 12/21] xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request Chuck Lever
2014-07-09 16:58 ` [PATCH v2 13/21] xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external() Chuck Lever
2014-07-09 16:58 ` [PATCH v2 14/21] xprtrdma: Disable completions for FAST_REG_MR Work Requests Chuck Lever
2014-07-09 16:58 ` [PATCH v2 15/21] xprtrdma: Disable completions for LOCAL_INV " Chuck Lever
[not found] ` <20140709165838.3496.17169.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2014-07-10 15:48 ` Shirley Ma [this message]
2014-07-09 16:58 ` [PATCH v2 16/21] xprtrdma: Rename frmr_wr Chuck Lever
2014-07-09 16:58 ` [PATCH v2 17/21] xprtrdma: Allocate each struct rpcrdma_mw separately Chuck Lever
2014-07-09 16:59 ` [PATCH v2 18/21] xprtrdma: Schedule reply tasklet once per upcall Chuck Lever
2014-07-09 16:59 ` [PATCH v2 19/21] xprtrdma: Make rpcrdma_ep_disconnect() return void Chuck Lever
2014-07-09 16:59 ` [PATCH v2 20/21] xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro Chuck Lever
2014-07-09 16:59 ` [PATCH v2 21/21] xprtrdma: Handle additional connection events Chuck Lever
2014-07-10 19:19 ` [PATCH v2 00/21] NFS/RDMA client patches for 3.17 Steve Wise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53BEB5C8.4070709@oracle.com \
--to=shirley.ma-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox