From: Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
To: Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH v3 01/49] IB/core: Add header definitions
Date: Wed, 17 Jun 2015 10:12:41 -0400 [thread overview]
Message-ID: <55818059.90701@dev.mellanox.co.il> (raw)
In-Reply-To: <20150617122840.8744.38451.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
On 6/17/2015 8:28 AM, Mike Marciniszyn wrote:
> From: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>
> Add common OPA header definitions for driver
> build:
> - opa_port_info.h
> - opa_smi.h
> - hfi1_user.sh
>
> Additionally, ib_mad.h, has additional definitions
> that are common to ib_drivers including:
> - trap support
> - cca support
>
> The qib driver has the duplication removed in favor
> those in ib_mad.h
>
> Reviewed-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Reviewed-by: John, Jubin <jubin.john-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---
> drivers/infiniband/hw/qib/qib_mad.h | 147 +-----------
> include/rdma/ib_mad.h | 138 +++++++++++
> include/rdma/opa_port_info.h | 433 +++++++++++++++++++++++++++++++++++
Should opa_port_info.h be in include/rdma or in drivers/infiniband/hw/hfi1 ?
> include/rdma/opa_smi.h | 47 ++++
> include/uapi/rdma/hfi/hfi1_user.h | 427 +++++++++++++++++++++++++++++++++++
> 5 files changed, 1053 insertions(+), 139 deletions(-)
> create mode 100644 include/rdma/opa_port_info.h
> create mode 100644 include/uapi/rdma/hfi/hfi1_user.h
>
> diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h
> index 941d4d5..57e99dc 100644
> --- a/drivers/infiniband/hw/qib/qib_mad.h
> +++ b/drivers/infiniband/hw/qib/qib_mad.h
> @@ -36,148 +36,17 @@
>
> #include <rdma/ib_pma.h>
>
> -#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004)
> -#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008)
> -#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C)
> -#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C)
> +#define IB_SMP_UNSUP_VERSION \
> +cpu_to_be16(IB_MGMT_MAD_STATUS_BAD_VERSION)
>
> -struct ib_node_info {
> - u8 base_version;
> - u8 class_version;
> - u8 node_type;
> - u8 num_ports;
> - __be64 sys_guid;
> - __be64 node_guid;
> - __be64 port_guid;
> - __be16 partition_cap;
> - __be16 device_id;
> - __be32 revision;
> - u8 local_port_num;
> - u8 vendor_id[3];
> -} __packed;
> -
> -struct ib_mad_notice_attr {
> - u8 generic_type;
> - u8 prod_type_msb;
> - __be16 prod_type_lsb;
> - __be16 trap_num;
> - __be16 issuer_lid;
> - __be16 toggle_count;
> -
> - union {
> - struct {
> - u8 details[54];
> - } raw_data;
> -
> - struct {
> - __be16 reserved;
> - __be16 lid; /* where violation happened */
> - u8 port_num; /* where violation happened */
> - } __packed ntc_129_131;
> -
> - struct {
> - __be16 reserved;
> - __be16 lid; /* LID where change occurred */
> - u8 reserved2;
> - u8 local_changes; /* low bit - local changes */
> - __be32 new_cap_mask; /* new capability mask */
> - u8 reserved3;
> - u8 change_flags; /* low 3 bits only */
> - } __packed ntc_144;
> -
> - struct {
> - __be16 reserved;
> - __be16 lid; /* lid where sys guid changed */
> - __be16 reserved2;
> - __be64 new_sys_guid;
> - } __packed ntc_145;
> -
> - struct {
> - __be16 reserved;
> - __be16 lid;
> - __be16 dr_slid;
> - u8 method;
> - u8 reserved2;
> - __be16 attr_id;
> - __be32 attr_mod;
> - __be64 mkey;
> - u8 reserved3;
> - u8 dr_trunc_hop;
> - u8 dr_rtn_path[30];
> - } __packed ntc_256;
> -
> - struct {
> - __be16 reserved;
> - __be16 lid1;
> - __be16 lid2;
> - __be32 key;
> - __be32 sl_qp1; /* SL: high 4 bits */
> - __be32 qp2; /* high 8 bits reserved */
> - union ib_gid gid1;
> - union ib_gid gid2;
> - } __packed ntc_257_258;
> -
> - } details;
> -};
> -
> -/*
> - * Generic trap/notice types
> - */
> -#define IB_NOTICE_TYPE_FATAL 0x80
> -#define IB_NOTICE_TYPE_URGENT 0x81
> -#define IB_NOTICE_TYPE_SECURITY 0x82
> -#define IB_NOTICE_TYPE_SM 0x83
> -#define IB_NOTICE_TYPE_INFO 0x84
> +#define IB_SMP_UNSUP_METHOD \
> +cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD)
>
> -/*
> - * Generic trap/notice producers
> - */
> -#define IB_NOTICE_PROD_CA cpu_to_be16(1)
> -#define IB_NOTICE_PROD_SWITCH cpu_to_be16(2)
> -#define IB_NOTICE_PROD_ROUTER cpu_to_be16(3)
> -#define IB_NOTICE_PROD_CLASS_MGR cpu_to_be16(4)
> +#define IB_SMP_UNSUP_METH_ATTR \
> +cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD_ATTRIB)
>
> -/*
> - * Generic trap/notice numbers
> - */
> -#define IB_NOTICE_TRAP_LLI_THRESH cpu_to_be16(129)
> -#define IB_NOTICE_TRAP_EBO_THRESH cpu_to_be16(130)
> -#define IB_NOTICE_TRAP_FLOW_UPDATE cpu_to_be16(131)
> -#define IB_NOTICE_TRAP_CAP_MASK_CHG cpu_to_be16(144)
> -#define IB_NOTICE_TRAP_SYS_GUID_CHG cpu_to_be16(145)
> -#define IB_NOTICE_TRAP_BAD_MKEY cpu_to_be16(256)
> -#define IB_NOTICE_TRAP_BAD_PKEY cpu_to_be16(257)
> -#define IB_NOTICE_TRAP_BAD_QKEY cpu_to_be16(258)
> -
> -/*
> - * Repress trap/notice flags
> - */
> -#define IB_NOTICE_REPRESS_LLI_THRESH (1 << 0)
> -#define IB_NOTICE_REPRESS_EBO_THRESH (1 << 1)
> -#define IB_NOTICE_REPRESS_FLOW_UPDATE (1 << 2)
> -#define IB_NOTICE_REPRESS_CAP_MASK_CHG (1 << 3)
> -#define IB_NOTICE_REPRESS_SYS_GUID_CHG (1 << 4)
> -#define IB_NOTICE_REPRESS_BAD_MKEY (1 << 5)
> -#define IB_NOTICE_REPRESS_BAD_PKEY (1 << 6)
> -#define IB_NOTICE_REPRESS_BAD_QKEY (1 << 7)
> -
> -/*
> - * Generic trap/notice other local changes flags (trap 144).
> - */
> -#define IB_NOTICE_TRAP_LSE_CHG 0x04 /* Link Speed Enable changed */
> -#define IB_NOTICE_TRAP_LWE_CHG 0x02 /* Link Width Enable changed */
> -#define IB_NOTICE_TRAP_NODE_DESC_CHG 0x01
> -
> -/*
> - * Generic trap/notice M_Key volation flags in dr_trunc_hop (trap 256).
> - */
> -#define IB_NOTICE_TRAP_DR_NOTICE 0x80
> -#define IB_NOTICE_TRAP_DR_TRUNC 0x40
> -
> -struct ib_vl_weight_elem {
> - u8 vl; /* Only low 4 bits, upper 4 bits reserved */
> - u8 weight;
> -};
> +#define IB_SMP_INVALID_FIELD \
> +cpu_to_be16(IB_MGMT_MAD_STATUS_INVALID_ATTRIB_VALUE)
>
> #define IB_VLARB_LOWPRI_0_31 1
> #define IB_VLARB_LOWPRI_32_63 2
> diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h
> index c8422d5..d5ac022 100644
> --- a/include/rdma/ib_mad.h
> +++ b/include/rdma/ib_mad.h
> @@ -127,6 +127,60 @@
> #define IB_DEFAULT_PKEY_PARTIAL 0x7FFF
> #define IB_DEFAULT_PKEY_FULL 0xFFFF
>
> +/*
> + * Generic trap/notice types
> + */
> +#define IB_NOTICE_TYPE_FATAL 0x80
> +#define IB_NOTICE_TYPE_URGENT 0x81
> +#define IB_NOTICE_TYPE_SECURITY 0x82
> +#define IB_NOTICE_TYPE_SM 0x83
> +#define IB_NOTICE_TYPE_INFO 0x84
> +
> +/*
> + * Generic trap/notice producers
> + */
> +#define IB_NOTICE_PROD_CA cpu_to_be16(1)
> +#define IB_NOTICE_PROD_SWITCH cpu_to_be16(2)
> +#define IB_NOTICE_PROD_ROUTER cpu_to_be16(3)
> +#define IB_NOTICE_PROD_CLASS_MGR cpu_to_be16(4)
> +
> +/*
> + * Generic trap/notice numbers
SM Class trap/notice numbers
As such, should they be in ib_smi.h rather than ib_mad.h ?
> + */
> +#define IB_NOTICE_TRAP_LLI_THRESH cpu_to_be16(129)
> +#define IB_NOTICE_TRAP_EBO_THRESH cpu_to_be16(130)
> +#define IB_NOTICE_TRAP_FLOW_UPDATE cpu_to_be16(131)
> +#define IB_NOTICE_TRAP_CAP_MASK_CHG cpu_to_be16(144)
> +#define IB_NOTICE_TRAP_SYS_GUID_CHG cpu_to_be16(145)
> +#define IB_NOTICE_TRAP_BAD_MKEY cpu_to_be16(256)
> +#define IB_NOTICE_TRAP_BAD_PKEY cpu_to_be16(257)
> +#define IB_NOTICE_TRAP_BAD_QKEY cpu_to_be16(258)
> +
> +/*
> + * Repress trap/notice flags
> + */
> +#define IB_NOTICE_REPRESS_LLI_THRESH (1 << 0)
> +#define IB_NOTICE_REPRESS_EBO_THRESH (1 << 1)
> +#define IB_NOTICE_REPRESS_FLOW_UPDATE (1 << 2)
> +#define IB_NOTICE_REPRESS_CAP_MASK_CHG (1 << 3)
> +#define IB_NOTICE_REPRESS_SYS_GUID_CHG (1 << 4)
> +#define IB_NOTICE_REPRESS_BAD_MKEY (1 << 5)
> +#define IB_NOTICE_REPRESS_BAD_PKEY (1 << 6)
> +#define IB_NOTICE_REPRESS_BAD_QKEY (1 << 7)
What does this correspond to ? Is this some standard thing or are these
defines driver specific ?
> +
> +/*
> + * Generic trap/notice other local changes flags (trap 144).
SM Class trap/notice other local changes flags (trap 144)
As such, should they be in ib_smi.h rather than ib_mad.h ?
> + */
> +#define IB_NOTICE_TRAP_LSE_CHG 0x04 /* Link Speed Enable changed */
> +#define IB_NOTICE_TRAP_LWE_CHG 0x02 /* Link Width Enable changed */
> +#define IB_NOTICE_TRAP_NODE_DESC_CHG 0x01
> +
> +/*
> + * Generic trap/notice M_Key volation flags in dr_trunc_hop (trap 256).
SM Class trap/notice M_Key violation flags in dr_trunc_hop (trap 256)
As such, should they be in ib_smi.h rather than ib_mad.h ?
> + */
> +#define IB_NOTICE_TRAP_DR_NOTICE 0x80
> +#define IB_NOTICE_TRAP_DR_TRUNC 0x40
> +
> enum {
> IB_MGMT_MAD_HDR = 24,
> IB_MGMT_MAD_DATA = 232,
> @@ -240,6 +294,90 @@ struct ib_class_port_info {
> __be32 trap_qkey;
> };
>
> +struct ib_node_info {
> + u8 base_version;
> + u8 class_version;
> + u8 node_type;
> + u8 num_ports;
> + __be64 sys_guid;
> + __be64 node_guid;
> + __be64 port_guid;
> + __be16 partition_cap;
> + __be16 device_id;
> + __be32 revision;
> + u8 local_port_num;
> + u8 vendor_id[3];
> +} __packed;
This is SM attribute. Should it go into ib_smi.h like ib_port_info ?
> +
> +struct ib_mad_notice_attr {
> + u8 generic_type;
> + u8 prod_type_msb;
> + __be16 prod_type_lsb;
> + __be16 trap_num;
> + __be16 issuer_lid;
> + __be16 toggle_count;
> +
> + union {
> + struct {
> + u8 details[54];
> + } raw_data;
> +
> + struct {
> + __be16 reserved;
> + __be16 lid; /* where violation happened */
> + u8 port_num; /* where violation happened */
> + } __packed ntc_129_131;
> +
> + struct {
> + __be16 reserved;
> + __be16 lid; /* LID where change occurred */
> + u8 reserved2;
> + u8 local_changes; /* low bit - local changes */
> + __be32 new_cap_mask; /* new capability mask */
> + u8 reserved3;
> + u8 change_flags; /* low 3 bits only */
I think these 2 fields above should be combined to:
__be16 change_flags;
per IBA 1.3
> + } __packed ntc_144;
> +
> + struct {
> + __be16 reserved;
> + __be16 lid; /* lid where sys guid changed */
> + __be16 reserved2;
> + __be64 new_sys_guid;
> + } __packed ntc_145;
> +
> + struct {
> + __be16 reserved;
> + __be16 lid;
> + __be16 dr_slid;
> + u8 method;
> + u8 reserved2;
> + __be16 attr_id;
> + __be32 attr_mod;
> + __be64 mkey;
> + u8 reserved3;
> + u8 dr_trunc_hop;
> + u8 dr_rtn_path[30];
> + } __packed ntc_256;
> +
> + struct {
> + __be16 reserved;
> + __be16 lid1;
> + __be16 lid2;
> + __be32 key;
> + __be32 sl_qp1; /* SL: high 4 bits */
> + __be32 qp2; /* high 8 bits reserved */
> + union ib_gid gid1;
> + union ib_gid gid2;
> + } __packed ntc_257_258;
> +
> + } details;
> +};
> +
> +struct ib_vl_weight_elem {
> + u8 vl; /* VL is low 5 bits, upper 3 bits reserved */
Comment is appropriate for OPA. IBA is VL is low 4 bits, upper 4 bits
reserved.
> + u8 weight;
> +};
As this is SM class attribute, should it be in ib_smi.h rather than
ib_mad.h ?
> +
> /**
> * ib_mad_send_buf - MAD data buffer and work request for sends.
> * @next: A pointer used to chain together MADs for posting.
> diff --git a/include/rdma/opa_port_info.h b/include/rdma/opa_port_info.h
> new file mode 100644
> index 0000000..391dae1
> --- /dev/null
> +++ b/include/rdma/opa_port_info.h
> @@ -0,0 +1,433 @@
> +/*
> + * Copyright (c) 2014 Intel Corporation. All rights reserved.
> + *
> + * This software is available to you under a choice of one of two
> + * licenses. You may choose to be licensed under the terms of the GNU
> + * General Public License (GPL) Version 2, available from the file
> + * COPYING in the main directory of this source tree, or the
> + * OpenIB.org BSD license below:
> + *
> + * Redistribution and use in source and binary forms, with or
> + * without modification, are permitted provided that the following
> + * conditions are met:
> + *
> + * - Redistributions of source code must retain the above
> + * copyright notice, this list of conditions and the following
> + * disclaimer.
> + *
> + * - Redistributions in binary form must reproduce the above
> + * copyright notice, this list of conditions and the following
> + * disclaimer in the documentation and/or other materials
> + * provided with the distribution.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
> + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> + * SOFTWARE.
> + */
> +
> +#if !defined(OPA_PORT_INFO_H)
> +#define OPA_PORT_INFO_H
> +
> +/* Temporary until HFI driver is updated */
> +#ifndef USE_PI_LED_ENABLE
> +#define USE_PI_LED_ENABLE 0
> +#endif
> +
> +#define OPA_PORT_LINK_MODE_NOP 0 /* No change */
> +#define OPA_PORT_LINK_MODE_OPA 4 /* Port mode is OPA */
> +
> +#define OPA_PORT_PACKET_FORMAT_NOP 0 /* No change */
> +#define OPA_PORT_PACKET_FORMAT_8B 1 /* Format 8B */
> +#define OPA_PORT_PACKET_FORMAT_9B 2 /* Format 9B */
> +#define OPA_PORT_PACKET_FORMAT_10B 4 /* Format 10B */
> +#define OPA_PORT_PACKET_FORMAT_16B 8 /* Format 16B */
> +
> +#define OPA_PORT_LTP_CRC_MODE_NONE 0 /* No change */
> +#define OPA_PORT_LTP_CRC_MODE_14 1 /* 14-bit LTP CRC mode (optional) */
> +#define OPA_PORT_LTP_CRC_MODE_16 2 /* 16-bit LTP CRC mode */
> +#define OPA_PORT_LTP_CRC_MODE_48 4 /* 48-bit LTP CRC mode (optional) */
> +#define OPA_PORT_LTP_CRC_MODE_PER_LANE 8 /* 12/16-bit per lane LTP CRC mode */
> +
> +/* Link Down / Neighbor Link Down Reason; indicated as follows: */
> +#define OPA_LINKDOWN_REASON_NONE 0 /* No specified reason */
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_0 1
> +#define OPA_LINKDOWN_REASON_BAD_PKT_LEN 2
> +#define OPA_LINKDOWN_REASON_PKT_TOO_LONG 3
> +#define OPA_LINKDOWN_REASON_PKT_TOO_SHORT 4
> +#define OPA_LINKDOWN_REASON_BAD_SLID 5
> +#define OPA_LINKDOWN_REASON_BAD_DLID 6
> +#define OPA_LINKDOWN_REASON_BAD_L2 7
> +#define OPA_LINKDOWN_REASON_BAD_SC 8
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_8 9
> +#define OPA_LINKDOWN_REASON_BAD_MID_TAIL 10
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_10 11
> +#define OPA_LINKDOWN_REASON_PREEMPT_ERROR 12
> +#define OPA_LINKDOWN_REASON_PREEMPT_VL15 13
> +#define OPA_LINKDOWN_REASON_BAD_VL_MARKER 14
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_14 15
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_15 16
> +#define OPA_LINKDOWN_REASON_BAD_HEAD_DIST 17
> +#define OPA_LINKDOWN_REASON_BAD_TAIL_DIST 18
> +#define OPA_LINKDOWN_REASON_BAD_CTRL_DIST 19
> +#define OPA_LINKDOWN_REASON_BAD_CREDIT_ACK 20
> +#define OPA_LINKDOWN_REASON_UNSUPPORTED_VL_MARKER 21
> +#define OPA_LINKDOWN_REASON_BAD_PREEMPT 22
> +#define OPA_LINKDOWN_REASON_BAD_CONTROL_FLIT 23
> +#define OPA_LINKDOWN_REASON_EXCEED_MULTICAST_LIMIT 24
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_24 25
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_25 26
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_26 27
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_27 28
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_28 29
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_29 30
> +#define OPA_LINKDOWN_REASON_RCV_ERROR_30 31
> +#define OPA_LINKDOWN_REASON_EXCESSIVE_BUFFER_OVERRUN 32
> +#define OPA_LINKDOWN_REASON_UNKNOWN 33
> +/* 34 -reserved */
> +#define OPA_LINKDOWN_REASON_REBOOT 35
> +#define OPA_LINKDOWN_REASON_NEIGHBOR_UNKNOWN 36
> +/* 37-38 reserved */
> +#define OPA_LINKDOWN_REASON_FM_BOUNCE 39
> +#define OPA_LINKDOWN_REASON_SPEED_POLICY 40
> +#define OPA_LINKDOWN_REASON_WIDTH_POLICY 41
> +/* 42-48 reserved */
> +#define OPA_LINKDOWN_REASON_DISCONNECTED 49
> +#define OPA_LINKDOWN_REASONLOCAL_MEDIA_NOT_INSTALLED 50
> +#define OPA_LINKDOWN_REASON_NOT_INSTALLED 51
> +#define OPA_LINKDOWN_REASON_CHASSIS_CONFIG 52
> +/* 53 reserved */
> +#define OPA_LINKDOWN_REASON_END_TO_END_NOT_INSTALLED 54
> +/* 55 reserved */
> +#define OPA_LINKDOWN_REASON_POWER_POLICY 56
> +#define OPA_LINKDOWN_REASON_LINKSPEED_POLICY 57
> +#define OPA_LINKDOWN_REASON_LINKWIDTH_POLICY 58
> +/* 59 reserved */
> +#define OPA_LINKDOWN_REASON_SWITCH_MGMT 60
> +#define OPA_LINKDOWN_REASON_SMA_DISABLED 61
> +/* 62 reserved */
> +#define OPA_LINKDOWN_REASON_TRANSIENT 63
> +/* 64-255 reserved */
> +
> +/* OPA Link Init reason; indicated as follows: */
> +/* 3-7; 11-15 reserved; 8-15 cleared on Polling->LinkUp */
> +#define OPA_LINKINIT_REASON_NOP 0
> +#define OPA_LINKINIT_REASON_LINKUP (1 << 4)
> +#define OPA_LINKINIT_REASON_FLAPPING (2 << 4)
> +#define OPA_LINKINIT_REASON_CLEAR (8 << 4)
> +#define OPA_LINKINIT_OUTSIDE_POLICY (8 << 4)
> +#define OPA_LINKINIT_QUARANTINED (9 << 4)
> +#define OPA_LINKINIT_INSUFIC_CAPABILITY (10 << 4)
> +
> +#define OPA_LINK_SPEED_NOP 0x0000 /* Reserved (1-5 Gbps) */
> +#define OPA_LINK_SPEED_12_5G 0x0001 /* 12.5 Gbps */
> +#define OPA_LINK_SPEED_25G 0x0002 /* 25.78125? Gbps (EDR) */
> +
> +#define OPA_LINK_WIDTH_1X 0x0001
> +#define OPA_LINK_WIDTH_2X 0x0002
> +#define OPA_LINK_WIDTH_3X 0x0004
> +#define OPA_LINK_WIDTH_4X 0x0008
> +
> +#define OPA_CAP_MASK3_IsSnoopSupported (1 << 7)
> +#define OPA_CAP_MASK3_IsAsyncSC2VLSupported (1 << 6)
> +#define OPA_CAP_MASK3_IsAddrRangeConfigSupported (1 << 5)
> +#define OPA_CAP_MASK3_IsPassThroughSupported (1 << 4)
> +#define OPA_CAP_MASK3_IsSharedSpaceSupported (1 << 3)
> +/* reserved (1 << 2) */
> +#define OPA_CAP_MASK3_IsVLMarkerSupported (1 << 1)
> +#define OPA_CAP_MASK3_IsVLrSupported (1 << 0)
> +
> +/**
> + * new MTU values
> + */
> +enum {
> + OPA_MTU_8192 = 6,
> + OPA_MTU_10240 = 7,
> +};
> +
> +enum {
> + OPA_PORT_PHYS_CONF_DISCONNECTED = 0,
> + OPA_PORT_PHYS_CONF_STANDARD = 1,
> + OPA_PORT_PHYS_CONF_FIXED = 2,
> + OPA_PORT_PHYS_CONF_VARIABLE = 3,
> + OPA_PORT_PHYS_CONF_SI_PHOTO = 4
> +};
> +
> +enum port_info_field_masks {
> + /* vl.cap */
> + OPA_PI_MASK_VL_CAP = 0x1F,
> + /* port_states.ledenable_offlinereason */
> + OPA_PI_MASK_OFFLINE_REASON = 0x0F,
> + OPA_PI_MASK_LED_ENABLE = 0x40,
> + /* port_states.unsleepstate_downdefstate */
> + OPA_PI_MASK_UNSLEEP_STATE = 0xF0,
> + OPA_PI_MASK_DOWNDEF_STATE = 0x0F,
> + /* port_states.portphysstate_portstate */
> + OPA_PI_MASK_PORT_PHYSICAL_STATE = 0xF0,
> + OPA_PI_MASK_PORT_STATE = 0x0F,
> + /* port_phys_conf */
> + OPA_PI_MASK_PORT_PHYSICAL_CONF = 0x0F,
> + /* collectivemask_multicastmask */
> + OPA_PI_MASK_COLLECT_MASK = 0x38,
> + OPA_PI_MASK_MULTICAST_MASK = 0x07,
> + /* mkeyprotect_lmc */
> + OPA_PI_MASK_MKEY_PROT_BIT = 0xC0,
> + OPA_PI_MASK_LMC = 0x0F,
> + /* smsl */
> + OPA_PI_MASK_SMSL = 0x1F,
> + /* partenforce_filterraw */
> + /* Filter Raw In/Out bits 1 and 2 were removed */
> + OPA_PI_MASK_LINKINIT_REASON = 0xF0,
> + OPA_PI_MASK_PARTITION_ENFORCE_IN = 0x08,
> + OPA_PI_MASK_PARTITION_ENFORCE_OUT = 0x04,
> + /* operational_vls */
> + OPA_PI_MASK_OPERATIONAL_VL = 0x1F,
> + /* sa_qp */
> + OPA_PI_MASK_SA_QP = 0x00FFFFFF,
> + /* sm_trap_qp */
> + OPA_PI_MASK_SM_TRAP_QP = 0x00FFFFFF,
> + /* localphy_overrun_errors */
> + OPA_PI_MASK_LOCAL_PHY_ERRORS = 0xF0,
> + OPA_PI_MASK_OVERRUN_ERRORS = 0x0F,
> + /* clientrereg_subnettimeout */
> + OPA_PI_MASK_CLIENT_REREGISTER = 0x80,
> + OPA_PI_MASK_SUBNET_TIMEOUT = 0x1F,
> + /* port_link_mode */
> + OPA_PI_MASK_PORT_LINK_SUPPORTED = (0x001F << 10),
> + OPA_PI_MASK_PORT_LINK_ENABLED = (0x001F << 5),
> + OPA_PI_MASK_PORT_LINK_ACTIVE = (0x001F << 0),
> + /* port_link_crc_mode */
> + OPA_PI_MASK_PORT_LINK_CRC_SUPPORTED = 0x0F00,
> + OPA_PI_MASK_PORT_LINK_CRC_ENABLED = 0x00F0,
> + OPA_PI_MASK_PORT_LINK_CRC_ACTIVE = 0x000F,
> + /* port_mode */
> + OPA_PI_MASK_PORT_MODE_SECURITY_CHECK = 0x0001,
> + OPA_PI_MASK_PORT_MODE_16B_TRAP_QUERY = 0x0002,
> + OPA_PI_MASK_PORT_MODE_PKEY_CONVERT = 0x0004,
> + OPA_PI_MASK_PORT_MODE_SC2SC_MAPPING = 0x0008,
> + OPA_PI_MASK_PORT_MODE_VL_MARKER = 0x0010,
> + OPA_PI_MASK_PORT_PASS_THROUGH = 0x0020,
> + OPA_PI_MASK_PORT_ACTIVE_OPTOMIZE = 0x0040,
> + /* flit_control.interleave */
> + OPA_PI_MASK_INTERLEAVE_DIST_SUP = (0x0003 << 12),
> + OPA_PI_MASK_INTERLEAVE_DIST_ENABLE = (0x0003 << 10),
> + OPA_PI_MASK_INTERLEAVE_MAX_NEST_TX = (0x001F << 5),
> + OPA_PI_MASK_INTERLEAVE_MAX_NEST_RX = (0x001F << 0),
> +
> + /* port_error_action */
> + OPA_PI_MASK_EX_BUFFER_OVERRUN = 0x80000000,
> + /* 7 bits reserved */
> + OPA_PI_MASK_FM_CFG_ERR_EXCEED_MULTICAST_LIMIT = 0x00800000,
> + OPA_PI_MASK_FM_CFG_BAD_CONTROL_FLIT = 0x00400000,
> + OPA_PI_MASK_FM_CFG_BAD_PREEMPT = 0x00200000,
> + OPA_PI_MASK_FM_CFG_UNSUPPORTED_VL_MARKER = 0x00100000,
> + OPA_PI_MASK_FM_CFG_BAD_CRDT_ACK = 0x00080000,
> + OPA_PI_MASK_FM_CFG_BAD_CTRL_DIST = 0x00040000,
> + OPA_PI_MASK_FM_CFG_BAD_TAIL_DIST = 0x00020000,
> + OPA_PI_MASK_FM_CFG_BAD_HEAD_DIST = 0x00010000,
> + /* 2 bits reserved */
> + OPA_PI_MASK_PORT_RCV_BAD_VL_MARKER = 0x00002000,
> + OPA_PI_MASK_PORT_RCV_PREEMPT_VL15 = 0x00001000,
> + OPA_PI_MASK_PORT_RCV_PREEMPT_ERROR = 0x00000800,
> + /* 1 bit reserved */
> + OPA_PI_MASK_PORT_RCV_BAD_MidTail = 0x00000200,
> + /* 1 bit reserved */
> + OPA_PI_MASK_PORT_RCV_BAD_SC = 0x00000080,
> + OPA_PI_MASK_PORT_RCV_BAD_L2 = 0x00000040,
> + OPA_PI_MASK_PORT_RCV_BAD_DLID = 0x00000020,
> + OPA_PI_MASK_PORT_RCV_BAD_SLID = 0x00000010,
> + OPA_PI_MASK_PORT_RCV_PKTLEN_TOOSHORT = 0x00000008,
> + OPA_PI_MASK_PORT_RCV_PKTLEN_TOOLONG = 0x00000004,
> + OPA_PI_MASK_PORT_RCV_BAD_PKTLEN = 0x00000002,
> + OPA_PI_MASK_PORT_RCV_BAD_LT = 0x00000001,
> +
> + /* pass_through.res_drctl */
> + OPA_PI_MASK_PASS_THROUGH_DR_CONTROL = 0x01,
> +
> + /* buffer_units */
> + OPA_PI_MASK_BUF_UNIT_VL15_INIT = (0x00000FFF << 11),
> + OPA_PI_MASK_BUF_UNIT_VL15_CREDIT_RATE = (0x0000001F << 6),
> + OPA_PI_MASK_BUF_UNIT_CREDIT_ACK = (0x00000003 << 3),
> + OPA_PI_MASK_BUF_UNIT_BUF_ALLOC = (0x00000003 << 0),
> +
> + /* neigh_mtu.pvlx_to_mtu */
> + OPA_PI_MASK_NEIGH_MTU_PVL0 = 0xF0,
> + OPA_PI_MASK_NEIGH_MTU_PVL1 = 0x0F,
> +
> + /* neigh_mtu.vlstall_hoq_life */
> + OPA_PI_MASK_VL_STALL = (0x03 << 5),
> + OPA_PI_MASK_HOQ_LIFE = (0x1F << 0),
> +
> + /* port_neigh_mode */
> + OPA_PI_MASK_NEIGH_MGMT_ALLOWED = (0x01 << 3),
> + OPA_PI_MASK_NEIGH_FW_AUTH_BYPASS = (0x01 << 2),
> + OPA_PI_MASK_NEIGH_NODE_TYPE = (0x03 << 0),
> +
> + /* resptime_value */
> + OPA_PI_MASK_RESPONSE_TIME_VALUE = 0x1F,
> +
> + /* mtucap */
> + OPA_PI_MASK_MTU_CAP = 0x0F,
> +};
> +
> +#if USE_PI_LED_ENABLE
> +struct opa_port_states {
> + u8 reserved;
> + u8 ledenable_offlinereason; /* 1 res, 1 bit, 6 bits */
> + u8 reserved2;
> + u8 portphysstate_portstate; /* 4 bits, 4 bits */
> +};
> +#define PI_LED_ENABLE_SUP 1
> +#else
> +struct opa_port_states {
> + u8 reserved;
> + u8 offline_reason; /* 2 res, 6 bits */
> + u8 reserved2;
> + u8 portphysstate_portstate; /* 4 bits, 4 bits */
> +};
> +#define PI_LED_ENABLE_SUP 0
> +#endif
> +
> +struct opa_port_state_info {
> + struct opa_port_states port_states;
> + u16 link_width_downgrade_tx_active;
> + u16 link_width_downgrade_rx_active;
> +};
> +
> +struct opa_port_info {
> + __be32 lid;
> + __be32 flow_control_mask;
> +
> + struct {
> + u8 res; /* was inittype */
> + u8 cap; /* 3 res, 5 bits */
> + __be16 high_limit;
> + __be16 preempt_limit;
> + u8 arb_high_cap;
> + u8 arb_low_cap;
> + } vl;
> +
> + struct opa_port_states port_states;
> + u8 port_phys_conf; /* 4 res, 4 bits */
> + u8 collectivemask_multicastmask; /* 2 res, 3, 3 */
> + u8 mkeyprotect_lmc; /* 2 bits, 2 res, 4 bits */
> + u8 smsl; /* 3 res, 5 bits */
> +
> + u8 partenforce_filterraw; /* bit fields */
> + u8 operational_vls; /* 3 res, 5 bits */
> + __be16 pkey_8b;
> + __be16 pkey_10b;
> + __be16 mkey_violations;
> +
> + __be16 pkey_violations;
> + __be16 qkey_violations;
> + __be32 sm_trap_qp; /* 8 bits, 24 bits */
> +
> + __be32 sa_qp; /* 8 bits, 24 bits */
> + u8 neigh_port_num;
> + u8 link_down_reason;
> + u8 neigh_link_down_reason;
> + u8 clientrereg_subnettimeout; /* 1 bit, 2 bits, 5 */
> +
> + struct {
> + __be16 supported;
> + __be16 enabled;
> + __be16 active;
> + } link_speed;
> + struct {
> + __be16 supported;
> + __be16 enabled;
> + __be16 active;
> + } link_width;
> + struct {
> + __be16 supported;
> + __be16 enabled;
> + __be16 tx_active;
> + __be16 rx_active;
> + } link_width_downgrade;
> + __be16 port_link_mode; /* 1 res, 5 bits, 5 bits, 5 bits */
> + __be16 port_ltp_crc_mode; /* 4 res, 4 bits, 4 bits, 4 bits */
> +
> + __be16 port_mode; /* 9 res, bit fields */
> + struct {
> + __be16 supported;
> + __be16 enabled;
> + } port_packet_format;
> + struct {
> + __be16 interleave; /* 2 res, 2,2,5,5 */
> + struct {
> + __be16 min_initial;
> + __be16 min_tail;
> + u8 large_pkt_limit;
> + u8 small_pkt_limit;
> + u8 max_small_pkt_limit;
> + u8 preemption_limit;
> + } preemption;
> + } flit_control;
> +
> + __be32 reserved4;
> + __be32 port_error_action; /* bit field */
> +
> + struct {
> + u8 egress_port;
> + u8 res_drctl; /* 7 res, 1 */
> + } pass_through;
> + __be16 mkey_lease_period;
> + __be32 buffer_units; /* 9 res, 12, 5, 3, 3 */
> +
> + __be32 reserved5;
> + __be32 sm_lid;
> +
> + __be64 mkey;
> +
> + __be64 subnet_prefix;
> +
> + struct {
> + u8 pvlx_to_mtu[OPA_MAX_VLS/2]; /* 4 bits, 4 bits */
> + } neigh_mtu;
> +
> + struct {
> + u8 vlstall_hoqlife; /* 3 bits, 5 bits */
> + } xmit_q[OPA_MAX_VLS];
> +
> + struct {
> + u8 addr[16];
> + } ipaddr_ipv6;
> +
> + struct {
> + u8 addr[4];
> + } ipaddr_ipv4;
> +
> + u32 reserved6;
> + u32 reserved7;
> + u32 reserved8;
> +
> + __be64 neigh_node_guid;
> +
> + __be32 ib_cap_mask;
> + __be16 reserved9; /* was ib_cap_mask2 */
> + __be16 opa_cap_mask;
> +
> + __be32 reserved10; /* was link_roundtrip_latency */
> + __be16 overall_buffer_space;
> + __be16 reserved11; /* was max_credit_hint */
> +
> + __be16 diag_code;
> + struct {
> + u8 buffer;
> + u8 wire;
> + } replay_depth;
> + u8 port_neigh_mode;
> + u8 mtucap; /* 4 res, 4 bits */
> +
> + u8 resptimevalue; /* 3 res, 5 bits */
> + u8 local_port_num;
> + u8 reserved12;
> + u8 reserved13; /* was guid_cap */
> +} __attribute__ ((packed));
> +
> +#endif /* OPA_PORT_INFO_H */
> diff --git a/include/rdma/opa_smi.h b/include/rdma/opa_smi.h
> index 29063e8..4a529ef 100644
> --- a/include/rdma/opa_smi.h
> +++ b/include/rdma/opa_smi.h
> @@ -40,6 +40,10 @@
> #define OPA_SMP_DR_DATA_SIZE 1872
> #define OPA_SMP_MAX_PATH_HOPS 64
>
> +#define OPA_MAX_VLS 32
> +#define OPA_MAX_SLS 32
> +#define OPA_MAX_SCS 32
> +
> #define OPA_SMI_CLASS_VERSION 0x80
>
> #define OPA_LID_PERMISSIVE cpu_to_be32(0xFFFFFFFF)
> @@ -73,6 +77,49 @@ struct opa_smp {
> } __packed;
>
>
> +/* Subnet management attributes */
> +/* ... */
> +#define OPA_ATTRIB_ID_NODE_DESCRIPTION cpu_to_be16(0x0010)
> +#define OPA_ATTRIB_ID_NODE_INFO cpu_to_be16(0x0011)
> +#define OPA_ATTRIB_ID_PORT_INFO cpu_to_be16(0x0015)
> +#define OPA_ATTRIB_ID_PARTITION_TABLE cpu_to_be16(0x0016)
> +#define OPA_ATTRIB_ID_SL_TO_SC_MAP cpu_to_be16(0x0017)
Is this really SL_TO_SC or SL_TO_VL ? The IDs < 0x8000 appear to map to
IB standard attributes.
> +#define OPA_ATTRIB_ID_VL_ARBITRATION cpu_to_be16(0x0018)
> +#define OPA_ATTRIB_ID_SM_INFO cpu_to_be16(0x0020)
> +#define OPA_ATTRIB_ID_CABLE_INFO cpu_to_be16(0x0032)
> +#define OPA_ATTRIB_ID_AGGREGATE cpu_to_be16(0x0080)
> +#define OPA_ATTRIB_ID_SC_TO_SL_MAP cpu_to_be16(0x0082)
> +#define OPA_ATTRIB_ID_SC_TO_VLR_MAP cpu_to_be16(0x0083)
> +#define OPA_ATTRIB_ID_SC_TO_VLT_MAP cpu_to_be16(0x0084)
> +#define OPA_ATTRIB_ID_SC_TO_VLNT_MAP cpu_to_be16(0x0085)
> +/* ... */
> +#define OPA_ATTRIB_ID_PORT_STATE_INFO cpu_to_be16(0x0087)
> +/* ... */
> +#define OPA_ATTRIB_ID_BUFFER_CONTROL_TABLE cpu_to_be16(0x008A)
> +/* ... */
> +
> +struct opa_node_description {
> + u8 data[64];
> +} __attribute__ ((packed));
> +
> +struct opa_node_info {
> + u8 base_version;
> + u8 class_version;
> + u8 node_type;
> + u8 num_ports;
> + __be32 reserved;
> + __be64 system_image_guid;
> + __be64 node_guid;
> + __be64 port_guid;
> + __be16 partition_cap;
> + __be16 device_id;
> + __be32 revision;
> + u8 local_port_num;
> + u8 vendor_id[3]; /* network byte order */
> +} __attribute__ ((packed));
> +
> +#define OPA_PARTITION_TABLE_BLK_SIZE 32
> +
> static inline u8
> opa_get_smp_direction(struct opa_smp *smp)
> {
<snip...>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-17 14:12 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 12:28 [PATCH v3 00/49] Add OPA gen1 driver Mike Marciniszyn
[not found] ` <20150617122755.8744.44665.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
2015-06-17 12:28 ` [PATCH v3 01/49] IB/core: Add header definitions Mike Marciniszyn
[not found] ` <20150617122840.8744.38451.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
2015-06-17 14:12 ` Hal Rosenstock [this message]
[not found] ` <55818059.90701-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-07-30 20:49 ` Marciniszyn, Mike
2015-08-31 15:40 ` ira.weiny
2015-06-17 12:28 ` [PATCH v3 02/49] IB/hfi1: add chip specific support part1 Mike Marciniszyn
2015-06-17 12:28 ` [PATCH v3 03/49] IB/hfi1: add chip specific support part2 Mike Marciniszyn
2015-06-17 12:28 ` [PATCH v3 04/49] IB/hfi1: add chip specific support part3 Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 05/49] IB/hfi1: add chip specific support part4 Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 06/49] IB/hfi1: add chip register definitions Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 07/49] IB/hfi1: add chip specific headers Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 08/49] IB/hfi1: add common header file definitions Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 09/49] IB/hfi1: add completion queue processing Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 10/49] IB/hfi1: add debugfs handling Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 11/49] IB/hfi1: add char device instantiation code Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 12/49] IB/hfi1: add diagnostic hooks Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 13/49] IB/hfi1: add dma operation hooks Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 14/49] IB/hfi1: add low lower receive functions Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 15/49] IB/hfi1: add eeprom hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 16/49] IB/hfi1: add PSM driver control/data path Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 17/49] IB/hfi1: add firmware hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 18/49] IB/hfi1: add general hfi header file Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 19/49] IB/hfi1: add module init hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 20/49] IB/hfi1: add interrupt hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 21/49] IB/hfi1: add progress delay/restart hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 22/49] IB/hfi1: add rkey/lkey validation Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 23/49] IB/hfi1: add OPA mad handling part1 Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 24/49] IB/hfi1: add OPA mad handling part2 Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 25/49] IB/hfi1: add local mad header Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 26/49] IB/hfi1: add user/kernel memory sharing hooks Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 27/49] IB/hfi1: add memory region handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 28/49] IB/hfi1: add misc OPA defines Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 29/49] IB/hfi1: add pcie routines Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 30/49] IB/hfi1: add pio handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 31/49] IB/hfi1: add platform config definitions Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 32/49] IB/hfi1: add qp handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 33/49] IB/hfi1: add qsfp handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 34/49] IB/hfi1: add RC QP handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 35/49] IB/hfi1: add routines for RC/UC Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 36/49] IB/hfi1: add sdma routines Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 37/49] IB/hfi1: add sdma header file Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 38/49] IB/hfi1: add SRQ handling Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 39/49] IB/hfi1: add sysfs routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 40/49] IB/hfi1: add tracepoint debug routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 41/49] IB/hfi1: add QSFP twsi routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 42/49] IB/hfi1: add UC QP handling Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 43/49] IB/hfi1: add UD " Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 44/49] IB/hfi1: add low level page locking Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 45/49] IB/hfi1: add PSM sdma hooks Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 46/49] IB/hfi1: add general verbs handling Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 47/49] IB/hfi1: add multicast routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 48/49] IB/hfi1: add driver make/config files Mike Marciniszyn
2015-06-17 12:33 ` [PATCH v3 49/49] IB/core: Add opa driver to kbuild Mike Marciniszyn
2015-06-19 10:55 ` [PATCH v3 00/49] Add OPA gen1 driver Or Gerlitz
[not found] ` <CAJ3xEMiire8aFGr8FkcA_PEELAGpF7fxwWNwS3_L4wvK9s+Pkw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-16 19:36 ` Marciniszyn, Mike
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55818059.90701@dev.mellanox.co.il \
--to=hal-ldsdmyg8hgv8yrgs2mwiifqbs+8scbdb@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).