linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bart Van Assche <bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
To: Jason Gunthorpe
	<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH 5/8] IB/srp: Remove use_mr argument from srp_map_sg_entry()
Date: Mon, 10 Aug 2015 17:08:18 -0700	[thread overview]
Message-ID: <55C93CF2.8080005@sandisk.com> (raw)
In-Reply-To: <55C93C61.9010508-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>

Move the srp_map_desc() call from inside srp_map_sg_entry() to
srp_map_sg() such that the use_mr argument can be removed from
srp_map_sg_entry().

Signed-off-by: Bart Van Assche <bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
---
 drivers/infiniband/ulp/srp/ib_srp.c | 36 +++++++++++++++---------------------
 1 file changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 660a4a4..b8fc35b 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1260,6 +1260,8 @@ static void srp_map_desc(struct srp_map_state *state, dma_addr_t dma_addr,
 {
 	struct srp_direct_buf *desc = state->desc;
 
+	WARN_ON_ONCE(!dma_len);
+
 	desc->va = cpu_to_be64(dma_addr);
 	desc->key = cpu_to_be32(rkey);
 	desc->len = cpu_to_be32(dma_len);
@@ -1366,29 +1368,17 @@ static int srp_finish_mapping(struct srp_map_state *state,
 
 static int srp_map_sg_entry(struct srp_map_state *state,
 			    struct srp_rdma_ch *ch,
-			    struct scatterlist *sg, int sg_index,
-			    bool use_mr)
+			    struct scatterlist *sg, int sg_index)
 {
 	struct srp_target_port *target = ch->target;
 	struct srp_device *dev = target->srp_host->srp_dev;
 	struct ib_device *ibdev = dev->dev;
 	dma_addr_t dma_addr = ib_sg_dma_address(ibdev, sg);
 	unsigned int dma_len = ib_sg_dma_len(ibdev, sg);
-	unsigned int len;
+	unsigned int len = 0;
 	int ret;
 
-	if (!dma_len)
-		return 0;
-
-	if (!use_mr) {
-		/*
-		 * Once we're in direct map mode for a request, we don't
-		 * go back to FMR or FR mode, so no need to update anything
-		 * other than the descriptor.
-		 */
-		srp_map_desc(state, dma_addr, dma_len, target->rkey);
-		return 0;
-	}
+	WARN_ON_ONCE(!dma_len);
 
 	while (dma_len) {
 		unsigned offset = dma_addr & ~dev->mr_page_mask;
@@ -1441,16 +1431,20 @@ static int srp_map_sg(struct srp_map_state *state, struct srp_rdma_ch *ch,
 		use_mr = !!ch->fmr_pool;
 	}
 
-	for_each_sg(scat, sg, count, i) {
-		ret = srp_map_sg_entry(state, ch, sg, i, use_mr);
-		if (ret)
-			goto out;
-	}
-
 	if (use_mr) {
+		for_each_sg(scat, sg, count, i) {
+			ret = srp_map_sg_entry(state, ch, sg, i);
+			if (ret)
+				goto out;
+		}
 		ret = srp_finish_mapping(state, ch);
 		if (ret)
 			goto out;
+	} else {
+		for_each_sg(scat, sg, count, i) {
+			srp_map_desc(state, ib_sg_dma_address(dev->dev, sg),
+				     ib_sg_dma_len(dev->dev, sg), target->rkey);
+		}
 	}
 
 	req->nmdesc = state->nmdesc;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-08-11  0:08 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-30 23:22 [PATCH v2 00/12] IB: Replace safe uses for ib_get_dma_mr with pd->local_dma_lkey Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 02/12] IB/mad: Remove ib_get_dma_mr calls Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 04/12] IB/mlx4: " Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 05/12] IB/mlx5: " Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 06/12] IB/iser: Use pd->local_dma_lkey Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 07/12] iser-target: Remove ib_get_dma_mr calls Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 09/12] IB/srp: Do not create an all physical insecure rkey by default Jason Gunthorpe
2015-08-03 15:39   ` Christoph Hellwig
2015-08-03 17:18   ` Bart Van Assche
2015-07-30 23:22 ` [PATCH v2 10/12] ib_srpt: Remove ib_get_dma_mr calls Jason Gunthorpe
2015-07-30 23:22 ` [PATCH v2 11/12] net/9p: " Jason Gunthorpe
     [not found] ` <1438298547-21404-1-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-07-30 23:22   ` [PATCH v2 01/12] IB/core: Guarantee that a local_dma_lkey is available Jason Gunthorpe
2015-08-02 13:09     ` Haggai Eran
2015-08-04  3:21       ` Jason Gunthorpe
2015-07-30 23:22   ` [PATCH v2 03/12] IB/ipoib: Remove ib_get_dma_mr calls Jason Gunthorpe
2015-07-30 23:22   ` [PATCH v2 08/12] IB/srp: Use pd->local_dma_lkey Jason Gunthorpe
2015-07-31 23:05     ` Bart Van Assche
2015-07-30 23:22   ` [PATCH v2 12/12] rds/ib: Remove ib_get_dma_mr calls Jason Gunthorpe
2015-08-14  2:47     ` santosh shilimkar
2015-07-31  7:42 ` [PATCH v2 00/12] IB: Replace safe uses for ib_get_dma_mr with pd->local_dma_lkey Christoph Hellwig
2015-07-31 13:26 ` Steve Wise
2015-07-31 22:20 ` Bart Van Assche
     [not found]   ` <55BBF4B8.2050700-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-07-31 22:31     ` Jason Gunthorpe
     [not found]       ` <20150731223153.GA1518-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-07-31 23:04         ` Bart Van Assche
     [not found]           ` <55BBFF03.7000505-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-07-31 23:14             ` Jason Gunthorpe
     [not found]               ` <20150731231430.GA1955-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-07-31 23:32                 ` Bart Van Assche
2015-08-01 20:05                 ` Doug Ledford
     [not found]                   ` <55BD2689.3080602-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-08-11 20:50                     ` Bart Van Assche
     [not found]                       ` <55CA600B.1050706-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-14 13:36                         ` Doug Ledford
     [not found]                           ` <55CDEEFA.4010803-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-08-14 16:20                             ` Bart Van Assche
     [not found]                               ` <55CE1554.60001-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-15  2:08                                 ` Doug Ledford
2015-08-03 15:24   ` Christoph Hellwig
     [not found]     ` <20150803152420.GA24193-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2015-08-03 18:33       ` Bart Van Assche
     [not found]         ` <55BFB40F.8000500-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-04 18:09           ` Jason Gunthorpe
     [not found]             ` <20150804180933.GB5038-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-08-05  6:41               ` David Dillow
     [not found]                 ` <1438756876.5698.2.camel-a7a0dvSY7KqLUyTwlgNVppKKF0rrzTr+@public.gmane.org>
2015-08-05 19:51                   ` Jason Gunthorpe
     [not found]                     ` <20150805195122.GA31595-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-08-05 21:45                       ` Bart Van Assche
     [not found]                         ` <55C2840C.5050301-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-05 22:41                           ` Bart Van Assche
     [not found]                             ` <55C2912A.50709-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-06  0:10                               ` Jason Gunthorpe
     [not found]                                 ` <20150806001006.GD2483-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-08-06  0:19                                   ` Bart Van Assche
     [not found]                                     ` <55C2A7FE.7020904-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-06  4:36                                       ` Jason Gunthorpe
     [not found]                                         ` <20150806043642.GA14153-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-08-06 15:09                                           ` Bart Van Assche
2015-08-11  0:05                                           ` [PATCH 0/9] IB/srp: Do not create an all physical insecure rkey by default Bart Van Assche
     [not found]                                             ` <55C93C61.9010508-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-11  0:06                                               ` [PATCH 1/8] IB/srp: Re-enable FMR for non-page aligned buffers Bart Van Assche
     [not found]                                                 ` <55C93C85.6090003-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-16 10:53                                                   ` Sagi Grimberg
     [not found]                                                     ` <55D06BB3.7070905-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-08-16 15:49                                                       ` Bart Van Assche
2015-08-11  0:06                                               ` [PATCH 2/8] IB/srp: Use multiple registrations for large memory regions Bart Van Assche
2015-08-11  0:07                                               ` [PATCH 3/8] IB/srp: Add memory descriptor array pointer range checking Bart Van Assche
     [not found]                                                 ` <55C93CBF.1060606-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-16 10:57                                                   ` Sagi Grimberg
     [not found]                                                     ` <55D06C9D.7030608-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-08-16 15:51                                                       ` Bart Van Assche
2015-08-11  0:07                                               ` [PATCH 4/8] IB/srp: Remove the memory registration backtracking code Bart Van Assche
2015-08-11  0:08                                               ` Bart Van Assche [this message]
2015-08-11  0:08                                               ` [PATCH 6/8] IB/srp: Introduce srp_device.use_fmr Bart Van Assche
     [not found]                                                 ` <55C93D0C.7060000-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-16 11:03                                                   ` Sagi Grimberg
     [not found]                                                     ` <55D06E05.5060209-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-08-16 15:57                                                       ` Bart Van Assche
2015-08-11  0:09                                               ` [PATCH 7/8] IB/srp: Register the indirect data buffer descriptor Bart Van Assche
     [not found]                                                 ` <55C93D21.1090102-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-08-16 11:09                                                   ` Sagi Grimberg
     [not found]                                                     ` <55D06F56.4060005-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-08-16 16:56                                                       ` Bart Van Assche
2015-08-11  0:09                                               ` [PATCH 8/8] IB/srp: Create an insecure all physical rkey only if needed Bart Van Assche
2015-08-11  5:40                                               ` [PATCH 0/9] IB/srp: Do not create an all physical insecure rkey by default Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55C93CF2.8080005@sandisk.com \
    --to=bart.vanassche-xdaiopvojttbdgjk7y7tuq@public.gmane.org \
    --cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).