Re: [Test fail]//Re: some test question//Re: [For help] configure crossbar build tool in CMakelist.txt

[oulijun <oulijun-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>]

在 2016/10/21 0:29, Jason Gunthorpe 写道:
> On Thu, Oct 20, 2016 at 03:50:07PM +0800, oulijun wrote:
>> 1. when set the VERBS_PROVIDER_DIR to empty, the
>> sizeof(VERBS_PROVIDER_DIR) should be 0 and the branch should not be
>> run
> 
> This is a mistake, sizeof('') is 1, so the if should be (> 1)' I will
> fix it.
> 
>> 2. the value of so_name should be /libhisi-rdmav2.so in @1 and
>> libhisi-rdmav2.so in @2.  in fact, the value of so_name is /libhisi
>> and libhisi
>>
>> the test print log as follows:
>>
>> -rdmav2.soer, 218] so_name: /libhisi
>> [load_driver, 219] so_name: -rdmav2.so
>> -rdmav2.soer, 229] so_name: libhisi
>> [load_driver, 230] so_name: -rdmav2.so
> 
> If you notice the -rdmav2.so has been placed at the start of the line,
> this suggest you have a spurious '\r' character. This would come from
> the .driver file.
> 
> Since you did not use the cmake install process you must have written
> the .driver file yourself and used a DOS text editor. UNIX line
> endings are required.
> 
> Jason
> 
Thanks, i see it.
> .
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html