From: Yanjun Zhu <yanjun.zhu-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: guanglei.li-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org,
dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCHv2 1/1] IB/ipoib: Remove unnecessary returned value check
Date: Thu, 5 Jan 2017 10:33:16 +0800 [thread overview]
Message-ID: <586DB06C.5020600@oracle.com> (raw)
In-Reply-To: <1483522018-4669-1-git-send-email-yanjun.zhu-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Hi, Yuval Shaia && Leon Romanovsky && Maintainers
Follow your advice, a new patch is made. Please check it.
Thanks a lot.
Zhu Yanjun
On 2017/1/4 17:26, Zhu Yanjun wrote:
> In the function ipoib_set_dev_features, the returned value is always 0.
> As such, it is not necessary to check the returned value.
> This is not a bug. It is a trivial problem.
>
> Reviewed-by: Guanglei Li <guanglei.li-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Zhu Yanjun <yanjun.zhu-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
> ---
> Change from v1 to v2:
> make change to __ipoib_vlan_add.
> change the commit header.
>
> drivers/infiniband/ulp/ipoib/ipoib.h | 2 +-
> drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 ++------
> drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 4 +---
> 3 files changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
> index da12717..f568064 100644
> --- a/drivers/infiniband/ulp/ipoib/ipoib.h
> +++ b/drivers/infiniband/ulp/ipoib/ipoib.h
> @@ -593,7 +593,7 @@ void ipoib_pkey_open(struct ipoib_dev_priv *priv);
> void ipoib_drain_cq(struct net_device *dev);
>
> void ipoib_set_ethtool_ops(struct net_device *dev);
> -int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca);
> +void ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca);
>
> #define IPOIB_FLAGS_RC 0x80
> #define IPOIB_FLAGS_UC 0x40
> diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
> index 3ce0765..4e8e11e 100644
> --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
> +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
> @@ -1984,7 +1984,7 @@ int ipoib_add_pkey_attr(struct net_device *dev)
> return device_create_file(&dev->dev, &dev_attr_pkey);
> }
>
> -int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca)
> +void ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca)
> {
> priv->hca_caps = hca->attrs.device_cap_flags;
>
> @@ -1996,8 +1996,6 @@ int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca)
>
> priv->dev->features |= priv->dev->hw_features;
> }
> -
> - return 0;
> }
>
> static struct net_device *ipoib_add_port(const char *format,
> @@ -2037,9 +2035,7 @@ static struct net_device *ipoib_add_port(const char *format,
> goto device_init_failed;
> }
>
> - result = ipoib_set_dev_features(priv, hca);
> - if (result)
> - goto device_init_failed;
> + ipoib_set_dev_features(priv, hca);
>
> /*
> * Set the full membership bit, so that we join the right
> diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
> index a2f9f29..0c2988d 100644
> --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
> +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
> @@ -61,9 +61,7 @@ int __ipoib_vlan_add(struct ipoib_dev_priv *ppriv, struct ipoib_dev_priv *priv,
> priv->parent = ppriv->dev;
> set_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags);
>
> - result = ipoib_set_dev_features(priv, ppriv->ca);
> - if (result)
> - goto err;
> + ipoib_set_dev_features(priv, ppriv->ca);
>
> priv->pkey = pkey;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next parent reply other threads:[~2017-01-05 2:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1483522018-4669-1-git-send-email-yanjun.zhu@oracle.com>
[not found] ` <1483522018-4669-1-git-send-email-yanjun.zhu-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-01-05 2:33 ` Yanjun Zhu [this message]
[not found] ` <586DB06C.5020600-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-01-05 6:05 ` [PATCHv2 1/1] IB/ipoib: Remove unnecessary returned value check Yuval Shaia
2017-01-05 8:58 ` Yanjun Zhu
2017-01-05 6:12 ` Leon Romanovsky
[not found] ` <20170105061236.GV12077-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-01-05 8:56 ` Zhu Yanjun
[not found] ` <1483606568-17232-1-git-send-email-yanjun.zhu-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-01-05 9:08 ` Yuval Shaia
2017-01-05 12:50 ` Leon Romanovsky
[not found] ` <20170105125022.GA15685-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-01-24 21:35 ` Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=586DB06C.5020600@oracle.com \
--to=yanjun.zhu-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=guanglei.li-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox