From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: jgg@ziepe.ca, leon@kernel.org, zyjzyj2000@gmail.com,
dsahern@kernel.org, linux-rdma@vger.kernel.org,
linux-kselftest@vger.kernel.org
Subject: Re: [PATCHv2 0/4] RDMA/rxe: Add the support that rxe can work in net namespace
Date: Fri, 6 Mar 2026 23:58:30 -0800 [thread overview]
Message-ID: <74291102-6d74-4d41-b614-14ad37474744@linux.dev> (raw)
In-Reply-To: <20260307075611.3410-1-yanjun.zhu@linux.dev>
在 2026/3/6 23:56, Zhu Yanjun 写道:
> Currently rxe does not work correctly in network namespaces.
>
> When the rdma_rxe module is loaded, a UDP socket listening on port
> 4791 is created in init_net. When users run:
>
> ip link add ... type rxe
>
> inside another network namespace, the RXE RDMA link is created but it
> cannot function properly because the underlying UDP socket belongs to
> init_net. Other network namespaces cannot use that socket.
>
> To address this issue, this series introduces net namespace support
> for rxe and moves socket management to be per network namespace.
>
> The series first introduces per-net namespace management for the IPv4
> and IPv6 sockets used by rxe. The sockets are created when the network
> namespace becomes active and are released when the namespace is
> destroyed.
>
> Based on this infrastructure, rxe RDMA links are then created and
> destroyed within each network namespace. This ensures that both the
> UDP sockets and RDMA links are correctly scoped to the namespace in
> which they are used.
>
> With these changes, rxe RDMA links can be created and used both in
> init_net and in other network namespaces, and resources are properly
> cleaned up during namespace teardown.
>
> The series also includes a selftest to verify RXE functionality in
> network namespaces.
The selftest result is as below:
"
# make -C tools/testing/selftests/ TARGETS=rdma run_tests
make: Entering directory '/root/Development/linux/tools/testing/selftests'
make[1]: Nothing to be done for 'all'.
TAP version 13
1..4
# timeout set to 45
# selftests: rdma: rxe_rping_between_netns.sh
# server DISCONNECT EVENT...
# wait for RDMA_READ_ADV state 10
ok 1 selftests: rdma: rxe_rping_between_netns.sh
# timeout set to 45
# selftests: rdma: rxe_ipv6.sh
ok 2 selftests: rdma: rxe_ipv6.sh
# timeout set to 45
# selftests: rdma: rxe_socket_with_netns.sh
ok 3 selftests: rdma: rxe_socket_with_netns.sh
# timeout set to 45
# selftests: rdma: rxe_test_NETDEV_UNREGISTER.sh
ok 4 selftests: rdma: rxe_test_NETDEV_UNREGISTER.sh
make: Leaving directory '/root/Development/linux/tools/testing/selftests'
"
Zhu Yanjun
>
> V1 -> V2: Fix the problems based on David Ahern.
>
> Zhu Yanjun (4):
> RDMA/nldev: Add dellink function pointer
> RDMA/rxe: Add net namespace support for IPv4/IPv6 sockets
> RDMA/rxe: Support RDMA link creation and destruction per net namespace
> RDMA/rxe: Add testcase for net namespace rxe
>
> MAINTAINERS | 1 +
> drivers/infiniband/core/nldev.c | 6 +
> drivers/infiniband/sw/rxe/Makefile | 3 +-
> drivers/infiniband/sw/rxe/rxe.c | 38 ++++-
> drivers/infiniband/sw/rxe/rxe_net.c | 144 +++++++++++++-----
> drivers/infiniband/sw/rxe/rxe_net.h | 9 +-
> drivers/infiniband/sw/rxe/rxe_ns.c | 136 +++++++++++++++++
> drivers/infiniband/sw/rxe/rxe_ns.h | 17 +++
> include/rdma/rdma_netlink.h | 2 +
> tools/testing/selftests/Makefile | 1 +
> tools/testing/selftests/rdma/Makefile | 7 +
> tools/testing/selftests/rdma/config | 3 +
> tools/testing/selftests/rdma/rxe_ipv6.sh | 47 ++++++
> .../selftests/rdma/rxe_rping_between_netns.sh | 57 +++++++
> .../selftests/rdma/rxe_socket_with_netns.sh | 64 ++++++++
> .../rdma/rxe_test_NETDEV_UNREGISTER.sh | 38 +++++
> 16 files changed, 526 insertions(+), 47 deletions(-)
> create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c
> create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h
> create mode 100644 tools/testing/selftests/rdma/Makefile
> create mode 100644 tools/testing/selftests/rdma/config
> create mode 100755 tools/testing/selftests/rdma/rxe_ipv6.sh
> create mode 100755 tools/testing/selftests/rdma/rxe_rping_between_netns.sh
> create mode 100755 tools/testing/selftests/rdma/rxe_socket_with_netns.sh
> create mode 100755 tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh
>
--
Best Regards,
Yanjun.Zhu
prev parent reply other threads:[~2026-03-07 7:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-07 7:56 [PATCHv2 0/4] RDMA/rxe: Add the support that rxe can work in net namespace Zhu Yanjun
2026-03-07 7:56 ` [PATCH 1/4] RDMA/nldev: Add dellink function pointer Zhu Yanjun
2026-03-07 7:56 ` [PATCH 2/4] RDMA/rxe: Add net namespace support for IPv4/IPv6 sockets Zhu Yanjun
2026-03-07 7:56 ` [PATCH 3/4] RDMA/rxe: Support RDMA link creation and destruction per net namespace Zhu Yanjun
2026-03-08 6:09 ` kernel test robot
2026-03-08 7:38 ` Zhu Yanjun
2026-03-07 7:56 ` [PATCH 4/4] RDMA/rxe: Add testcase for net namespace rxe Zhu Yanjun
2026-03-07 7:58 ` Zhu Yanjun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74291102-6d74-4d41-b614-14ad37474744@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=dsahern@kernel.org \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox