public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: "D. Wythe" <alibuda@linux.alibaba.com>
To: dust.li@linux.alibaba.com, kgraul@linux.ibm.com,
	wenjia@linux.ibm.com, jaka@linux.ibm.com, wintera@linux.ibm.com,
	guwen@linux.alibaba.com
Cc: kuba@kernel.org, davem@davemloft.net, netdev@vger.kernel.org,
	linux-s390@vger.kernel.org, linux-rdma@vger.kernel.org,
	tonylu@linux.alibaba.com, pabeni@redhat.com, edumazet@google.com
Subject: Re: [PATCH net-next 2/2] net/smc: Introduce IPPROTO_SMC
Date: Sat, 11 May 2024 10:23:31 +0800	[thread overview]
Message-ID: <76710317-8e9d-4efa-b3e9-1e361ee30135@linux.alibaba.com> (raw)
In-Reply-To: <20240510095711.GB78725@linux.alibaba.com>



On 5/10/24 5:57 PM, Dust Li wrote:
> On 2024-05-10 12:12:13, D. Wythe wrote:
>> From: "D. Wythe" <alibuda@linux.alibaba.com>
>>
>> This patch allows to create smc socket via AF_INET,
>> similar to the following code,
>>
>> /* create v4 smc sock */
>> v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
>>
>> /* create v6 smc sock */
>> v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
>>
>> There are several reasons why we believe it is appropriate here:
>>
>> 1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
>> address. There is no AF_SMC address at all.
>>
>> 2. Create smc socket in the AF_INET(6) path, which allows us to reuse
>> the infrastructure of AF_INET(6) path, such as common ebpf hooks.
>> Otherwise, smc have to implement it again in AF_SMC path.
>>
>> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
>> ---
>> include/uapi/linux/in.h |   2 +
>> net/smc/af_smc.c        | 129 +++++++++++++++++++++++++++++++++++++++++++++++-
>> net/smc/inet_smc.h      |  32 ++++++++++++
>> 3 files changed, 162 insertions(+), 1 deletion(-)
>> create mode 100644 net/smc/inet_smc.h
>>
>> diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
>> index e682ab6..74c12e33 100644
>> --- a/include/uapi/linux/in.h
>> +++ b/include/uapi/linux/in.h
>> @@ -83,6 +83,8 @@ enum {
>> #define IPPROTO_RAW		IPPROTO_RAW
>>    IPPROTO_MPTCP = 262,		/* Multipath TCP connection		*/
>> #define IPPROTO_MPTCP		IPPROTO_MPTCP
>> +  IPPROTO_SMC = 263,		/* Shared Memory Communications */
>                                                             ^ use tab to align here

There is a problem here, all previous definitions were aligned with 2 
spaces.

>> +#define IPPROTO_SMC		IPPROTO_SMC
>>    IPPROTO_MAX
>> };
>> #endif
>> diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
>> index 1f03724..b4557828 100644
>> --- a/net/smc/af_smc.c
>> +++ b/net/smc/af_smc.c
>> @@ -54,6 +54,7 @@
>> #include "smc_tracepoint.h"
>> #include "smc_sysctl.h"
>> #include "smc_loopback.h"
>> +#include "inet_smc.h"
>>
>> static DEFINE_MUTEX(smc_server_lgr_pending);	/* serialize link group
>> 						 * creation on server
>> @@ -3402,6 +3403,16 @@ static int smc_create(struct net *net, struct socket *sock, int protocol,
>> 	.create	= smc_create,
>> };
>>
> Why not put those whole bunch of inet staff into smc_inet.c ?
> Looks like your smc_inet.h is meanless without smc_inet.c
>

This header file was originally reserved for future merging of socks. If 
nobody likes it, I can move it to the
af_smc.c

>> +int smc_inet_init_sock(struct sock *sk)
>> +{
>> +	struct net *net = sock_net(sk);
>> +
>> +	/* init common smc sock */
>> +	smc_sock_init(net, sk, IPPROTO_SMC);
>> +	/* create clcsock */
>> +	return __smc_create_clcsk(net, sk, sk->sk_family);
>> +}
>> +
>> static int smc_ulp_init(struct sock *sk)
>> {
>> 	struct socket *tcp = sk->sk_socket;
>> @@ -3460,6 +3471,90 @@ static void smc_ulp_clone(const struct request_sock *req, struct sock *newsk,
>> 	.clone		= smc_ulp_clone,
>> };
>>
>> +struct proto smc_inet_prot = {
>> +	.name			= "INET_SMC",
>> +	.owner			= THIS_MODULE,
>> +	.init			= smc_inet_init_sock,
>> +	.hash			= smc_hash_sk,
>> +	.unhash			= smc_unhash_sk,
>> +	.release_cb		= smc_release_cb,
>> +	.obj_size		= sizeof(struct smc_sock),
>> +	.h.smc_hash	= &smc_v4_hashinfo,
>> +	.slab_flags	= SLAB_TYPESAFE_BY_RCU,
>                  ^
> Align please.
>
Got it.
>> +};
>> +
>> +const struct proto_ops smc_inet_stream_ops = {
>> +	.family		= PF_INET,
>> +	.owner		= THIS_MODULE,
>> +	.release	= smc_release,
>> +	.bind		= smc_bind,
>> +	.connect	= smc_connect,
>> +	.socketpair	= sock_no_socketpair,
>> +	.accept		= smc_accept,
>> +	.getname	= smc_getname,
>> +	.poll		= smc_poll,
>> +	.ioctl		= smc_ioctl,
>> +	.listen		= smc_listen,
>> +	.shutdown	= smc_shutdown,
>> +	.setsockopt	= smc_setsockopt,
>> +	.getsockopt	= smc_getsockopt,
>> +	.sendmsg	= smc_sendmsg,
>> +	.recvmsg	= smc_recvmsg,
>> +	.mmap		= sock_no_mmap,
>> +	.splice_read	= smc_splice_read,
> Ditto
>
>> +};
>> +
>> +struct inet_protosw smc_inet_protosw = {
>> +	.type       = SOCK_STREAM,
>> +	.protocol   = IPPROTO_SMC,
>> +	.prot   = &smc_inet_prot,
> Ditto
>
>> +	.ops    = &smc_inet_stream_ops,
>> +	.flags  = INET_PROTOSW_ICSK,
>> +};
>> +
>> +#if IS_ENABLED(CONFIG_IPV6)
>> +struct proto smc_inet6_prot = {
>> +	.name			= "INET6_SMC",
>> +	.owner			= THIS_MODULE,
>> +	.init			= smc_inet_init_sock,
>> +	.hash			= smc_hash_sk,
>> +	.unhash			= smc_unhash_sk,
>> +	.release_cb		= smc_release_cb,
>> +	.obj_size		= sizeof(struct smc_sock),
>> +	.h.smc_hash		= &smc_v6_hashinfo,
>> +	.slab_flags		= SLAB_TYPESAFE_BY_RCU,
>> +};
>> +
>> +const struct proto_ops smc_inet6_stream_ops = {
>> +	.family		= PF_INET6,
>> +	.owner		= THIS_MODULE,
>> +	.release	= smc_release,
>> +	.bind		= smc_bind,
>> +	.connect	= smc_connect,
>> +	.socketpair	= sock_no_socketpair,
>> +	.accept		= smc_accept,
>> +	.getname	= smc_getname,
>> +	.poll		= smc_poll,
>> +	.ioctl		= smc_ioctl,
>> +	.listen		= smc_listen,
>> +	.shutdown	= smc_shutdown,
>> +	.setsockopt	= smc_setsockopt,
>> +	.getsockopt	= smc_getsockopt,
>> +	.sendmsg	= smc_sendmsg,
>> +	.recvmsg	= smc_recvmsg,
>> +	.mmap		= sock_no_mmap,
>> +	.splice_read	= smc_splice_read,
> Ditto
>
>> +};
>> +
>> +struct inet_protosw smc_inet6_protosw = {
>> +	.type       = SOCK_STREAM,
>> +	.protocol   = IPPROTO_SMC,
>> +	.prot   = &smc_inet6_prot,
>> +	.ops    = &smc_inet6_stream_ops,
>> +	.flags  = INET_PROTOSW_ICSK,
> Ditto
>
>> +};
>> +#endif
>> +
>> unsigned int smc_net_id;
>>
>> static __net_init int smc_net_init(struct net *net)
>> @@ -3595,9 +3690,28 @@ static int __init smc_init(void)
>> 		goto out_lo;
>> 	}
>>
>> +	rc = proto_register(&smc_inet_prot, 1);
>> +	if (rc) {
>> +		pr_err("%s: proto_register smc_inet_prot fails with %d\n", __func__, rc);
>> +		goto out_ulp;
>> +	}
>> +	inet_register_protosw(&smc_inet_protosw);
>> +#if IS_ENABLED(CONFIG_IPV6)
>> +	rc = proto_register(&smc_inet6_prot, 1);
>> +	if (rc) {
>> +		pr_err("%s: proto_register smc_inet6_prot fails with %d\n", __func__, rc);
>> +		goto out_inet_prot;
>> +	}
>> +	inet6_register_protosw(&smc_inet6_protosw);
>> +#endif
>> +
>> 	static_branch_enable(&tcp_have_smc);
>> 	return 0;
>> -
>> +out_inet_prot:
>> +	inet_unregister_protosw(&smc_inet_protosw);
>> +	proto_unregister(&smc_inet_prot);
>> +out_ulp:
>> +	tcp_unregister_ulp(&smc_ulp_ops);
>> out_lo:
>> 	smc_loopback_exit();
>> out_ib:
>> @@ -3634,6 +3748,10 @@ static int __init smc_init(void)
>> static void __exit smc_exit(void)
>> {
>> 	static_branch_disable(&tcp_have_smc);
>> +	inet_unregister_protosw(&smc_inet_protosw);
>> +#if IS_ENABLED(CONFIG_IPV6)
>> +	inet6_unregister_protosw(&smc_inet6_protosw);
>> +#endif
>> 	tcp_unregister_ulp(&smc_ulp_ops);
>> 	sock_unregister(PF_SMC);
>> 	smc_core_exit();
>> @@ -3645,6 +3763,10 @@ static void __exit smc_exit(void)
>> 	destroy_workqueue(smc_hs_wq);
>> 	proto_unregister(&smc_proto6);
>> 	proto_unregister(&smc_proto);
>> +	proto_unregister(&smc_inet_prot);
>> +#if IS_ENABLED(CONFIG_IPV6)
>> +	proto_unregister(&smc_inet6_prot);
>> +#endif
>> 	smc_pnet_exit();
>> 	smc_nl_exit();
>> 	smc_clc_exit();
>> @@ -3661,4 +3783,9 @@ static void __exit smc_exit(void)
>> MODULE_LICENSE("GPL");
>> MODULE_ALIAS_NETPROTO(PF_SMC);
>> MODULE_ALIAS_TCP_ULP("smc");
>> +/* 263 for IPPROTO_SMC and 1 for SOCK_STREAM */
>> +MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 263, 1);
>> +#if IS_ENABLED(CONFIG_IPV6)
>> +MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET6, 263, 1);
>> +#endif
>> MODULE_ALIAS_GENL_FAMILY(SMC_GENL_FAMILY_NAME);
>> diff --git a/net/smc/inet_smc.h b/net/smc/inet_smc.h
>> new file mode 100644
>> index 00000000..fcdcb61
>> --- /dev/null
>> +++ b/net/smc/inet_smc.h
>> @@ -0,0 +1,32 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + *  Shared Memory Communications over RDMA (SMC-R) and RoCE
>> + *
>> + *  Definitions for the SMC module (socket related)
>> +
>> + *  Copyright IBM Corp. 2016
> You should update this.
Got it.
>> + *
>> + */
>> +#ifndef __INET_SMC
>> +#define __INET_SMC
>> +
>> +#include <net/protocol.h>
>> +#include <net/sock.h>
>> +#include <net/tcp.h>
>> +
>> +extern struct proto smc_inet_prot;
>> +extern const struct proto_ops smc_inet_stream_ops;
>> +extern struct inet_protosw smc_inet_protosw;
>> +
>> +#if IS_ENABLED(CONFIG_IPV6)
>> +#include <net/ipv6.h>
>> +/* MUST after net/tcp.h or warning */
>> +#include <net/transp_v6.h>
>> +extern struct proto smc_inet6_prot;
>> +extern const struct proto_ops smc_inet6_stream_ops;
>> +extern struct inet_protosw smc_inet6_protosw;
>> +#endif
>> +
>> +int smc_inet_init_sock(struct sock *sk);
>> +
>> +#endif // __INET_SMC
>           ^
>           use /* __INET_SMC */ instead
>
>> -- 
>> 1.8.3.1
>>


  reply	other threads:[~2024-05-11  2:23 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-10  4:12 [PATCH net-next 0/2] Introduce IPPROTO_SMC D. Wythe
2024-05-10  4:12 ` [PATCH net-next 1/2] net/smc: refatoring initialization of smc sock D. Wythe
2024-05-10  9:50   ` Dust Li
2024-05-11  2:26     ` D. Wythe
2024-05-11 12:21   ` Zhu Yanjun
2024-05-13  3:22     ` D. Wythe
2024-05-10  4:12 ` [PATCH net-next 2/2] net/smc: Introduce IPPROTO_SMC D. Wythe
2024-05-10  9:57   ` Dust Li
2024-05-11  2:23     ` D. Wythe [this message]
2024-05-11  2:46       ` Dust Li
2024-05-11  3:02         ` D. Wythe
2024-05-10 17:09   ` kernel test robot
2024-05-10 18:32   ` kernel test robot
2024-05-10  9:14 ` [PATCH net-next 0/2] " D. Wythe
2024-05-10 10:22 ` Wenjia Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=76710317-8e9d-4efa-b3e9-1e361ee30135@linux.alibaba.com \
    --to=alibuda@linux.alibaba.com \
    --cc=davem@davemloft.net \
    --cc=dust.li@linux.alibaba.com \
    --cc=edumazet@google.com \
    --cc=guwen@linux.alibaba.com \
    --cc=jaka@linux.ibm.com \
    --cc=kgraul@linux.ibm.com \
    --cc=kuba@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=tonylu@linux.alibaba.com \
    --cc=wenjia@linux.ibm.com \
    --cc=wintera@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox