* [PATCH] RDMA/nes: fix CX4 link problem in back-to-back configuration
@ 2010-03-03 19:13 Chien Tung
2010-03-11 23:15 ` Roland Dreier
0 siblings, 1 reply; 2+ messages in thread
From: Chien Tung @ 2010-03-03 19:13 UTC (permalink / raw)
To: Roland Dreier; +Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA
commit 09124e1913cf2140941f60ab4fdf8576e1e8fd8d took out
too much code and broke CX4 link detection in back-to-back
configuration. This will put back the code that does the link
check.
Signed-off-by: Chien Tung <chien.tin.tung-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/nes/nes_nic.c | 30 ++++++++++++++++++++++++++++--
1 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 7dd6ce6..a60efee 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1582,7 +1582,6 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
struct nes_vnic *nesvnic;
struct net_device *netdev;
struct nic_qp_map *curr_qp_map;
- u32 u32temp;
u8 phy_type = nesdev->nesadapter->phy_type[nesdev->mac_index];
netdev = alloc_etherdev(sizeof(struct nes_vnic));
@@ -1694,6 +1693,10 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
((phy_type == NES_PHY_TYPE_PUMA_1G) &&
(((PCI_FUNC(nesdev->pcidev->devfn) == 1) && (nesdev->mac_index == 2)) ||
((PCI_FUNC(nesdev->pcidev->devfn) == 2) && (nesdev->mac_index == 1)))))) {
+ u32 u32temp;
+ u32 link_mask;
+ u32 link_val;
+
u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 +
(0x200 * (nesdev->mac_index & 1)));
if (phy_type != NES_PHY_TYPE_PUMA_1G) {
@@ -1702,13 +1705,36 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
(0x200 * (nesdev->mac_index & 1)), u32temp);
}
+ /* Check and set linkup here. This is for back to back */
+ /* configuration where second port won't get link interrupt */
+ switch (phy_type) {
+ case NES_PHY_TYPE_PUMA_1G:
+ if (nesdev->mac_index < 2) {
+ link_mask = 0x01010000;
+ link_val = 0x01010000;
+ } else {
+ link_mask = 0x02020000;
+ link_val = 0x02020000;
+ }
+ break;
+ default:
+ link_mask = 0x0f1f0000;
+ link_val = 0x0f0f0000;
+ break;
+ }
+
+ u32temp = nes_read_indexed(nesdev,
+ NES_IDX_PHY_PCS_CONTROL_STATUS0 +
+ (0x200 * (nesdev->mac_index & 1)));
+ if ((u32temp & link_mask) == link_val)
+ nesvnic->linkup = 1;
+
/* clear the MAC interrupt status, assumes direct logical to physical mapping */
u32temp = nes_read_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index));
nes_debug(NES_DBG_INIT, "Phy interrupt status = 0x%X.\n", u32temp);
nes_write_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index), u32temp);
nes_init_phy(nesdev);
-
}
return netdev;
--
1.6.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] RDMA/nes: fix CX4 link problem in back-to-back configuration
2010-03-03 19:13 [PATCH] RDMA/nes: fix CX4 link problem in back-to-back configuration Chien Tung
@ 2010-03-11 23:15 ` Roland Dreier
0 siblings, 0 replies; 2+ messages in thread
From: Roland Dreier @ 2010-03-11 23:15 UTC (permalink / raw)
To: Chien Tung; +Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA
thanks, applied.
--
Roland Dreier <rolandd-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-03-11 23:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-03 19:13 [PATCH] RDMA/nes: fix CX4 link problem in back-to-back configuration Chien Tung
2010-03-11 23:15 ` Roland Dreier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox