public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
* [Bug 190951] New: SoftRoCE Performance Puzzle
@ 2016-12-23  3:59 bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r
       [not found] ` <bug-190951-11804-3bo0kxnWaOQUvHkbgXJLS5sdmw4N0Rt+2LY78lusg7I@public.gmane.org/>
  0 siblings, 1 reply; 2+ messages in thread
From: bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r @ 2016-12-23  3:59 UTC (permalink / raw)
  To: linux-rdma-u79uwXL29TY76Z2rM5mHXA

https://bugzilla.kernel.org/show_bug.cgi?id=190951

            Bug ID: 190951
           Summary: SoftRoCE Performance Puzzle
           Product: Drivers
           Version: 2.5
    Kernel Version: 4.9
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Infiniband/RDMA
          Assignee: drivers_infiniband-rdma-ztI5WcYan/vQLgFONoPN62D2FQJk+8+b@public.gmane.org
          Reporter: songweijia-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
        Regression: No

Created attachment 248401
  --> https://bugzilla.kernel.org/attachment.cgi?id=248401&action=edit
SoftRoCE Performance with 10G ethernet

I found the SoftRoCE throughput is much lower than TCP or UDP. I used two
high-end servers with Myricomm 10G dual port NIC. I ran a CentOS-7 virtual
machine in each of them. I upgraded the virtual machine kernel to the lastest
4.9(2016-12-11) version:
--------------------------------------------------------------------------
[weijia@srvm1 ~]$ uname -a
Linux srvm1 4.9.0 #1 SMP Fri Dec 16 16:35:46 EST 2016 x86_64 x86_64 x86_64
GNU/Linux
--------------------------------------------------------------------------
The two virtual machines use virtio nic driver so the network I/O over head is
very low. The iperf tool show ~9Gbps peak throughput with both TCP/UDP:
--------------------------------------------------------------------------
[weijia@srvm1 ~]$ iperf3 -c 192.168.30.10
Connecting to host 192.168.30.10, port 5201
[  4] local 192.168.29.10 port 59986 connected to 192.168.30.10 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec  1.06 GBytes  9.12 Gbits/sec    3   1.28 MBytes
[  4]   1.00-2.00   sec  1.09 GBytes  9.39 Gbits/sec    1   1.81 MBytes
[  4]   2.00-3.00   sec  1.06 GBytes  9.14 Gbits/sec    0   2.21 MBytes
[  4]   3.00-4.00   sec  1.09 GBytes  9.36 Gbits/sec    0   2.56 MBytes
[  4]   4.00-5.00   sec  1.07 GBytes  9.15 Gbits/sec    0   2.85 MBytes
[  4]   5.00-6.00   sec  1.09 GBytes  9.39 Gbits/sec    0   3.00 MBytes
[  4]   6.00-7.00   sec  1.07 GBytes  9.21 Gbits/sec    0   3.00 MBytes
[  4]   7.00-8.00   sec  1.09 GBytes  9.39 Gbits/sec    0   3.00 MBytes
[  4]   8.00-9.00   sec  1.09 GBytes  9.39 Gbits/sec    0   3.00 MBytes
[  4]   9.00-10.00  sec  1.09 GBytes  9.38 Gbits/sec    0   3.00 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  10.8 GBytes  9.29 Gbits/sec    4             sender
[  4]   0.00-10.00  sec  10.8 GBytes  9.29 Gbits/sec                  receiver

iperf Done.

[weijia@srvm1 ~]$ iperf3 -c 192.168.30.10 -u -b 15000m
Connecting to host 192.168.30.10, port 5201
[  4] local 192.168.29.10 port 50826 connected to 192.168.30.10 port 5201
[ ID] Interval           Transfer     Bandwidth       Total Datagrams
[  4]   0.00-1.00   sec   976 MBytes  8.19 Gbits/sec  124931
[  4]   1.00-2.00   sec  1.00 GBytes  8.63 Gbits/sec  131657
[  4]   2.00-3.00   sec  1.02 GBytes  8.75 Gbits/sec  133452
[  4]   3.00-4.00   sec  1.05 GBytes  9.02 Gbits/sec  137581
[  4]   4.00-5.00   sec  1.05 GBytes  9.02 Gbits/sec  137567
[  4]   5.00-6.00   sec  1.02 GBytes  8.72 Gbits/sec  133102
[  4]   6.00-7.00   sec  1.00 GBytes  8.61 Gbits/sec  131386
[  4]   7.00-8.00   sec   994 MBytes  8.34 Gbits/sec  127229
[  4]   8.00-9.00   sec  1.04 GBytes  8.94 Gbits/sec  136484
[  4]   9.00-10.00  sec   839 MBytes  7.04 Gbits/sec  107376
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total
Datagrams
[  4]   0.00-10.00  sec  9.92 GBytes  8.52 Gbits/sec  0.005 ms  323914/1300764
(25%)
[  4] Sent 1300764 datagrams

iperf Done.
--------------------------------------------------------------------------

Then I used ibv_rc_pingpong to test the bandwith between the two virtual
machines. The result is extremely low:
--------------------------------------------------------------------------
[weijia@srvm1 ~]$ ibv_rc_pingpong -s 4096 -g 1 -n 1000000 192.168.30.10
  local address:  LID 0x0000, QPN 0x000011, PSN 0x3072e0, GID
::ffff:192.168.29.10
  remote address: LID 0x0000, QPN 0x000011, PSN 0xa54a62, GID
::ffff:192.168.30.10
8192000000 bytes in 220.23 seconds = 297.58 Mbit/sec
1000000 iters in 220.23 seconds = 220.23 usec/iter
[weijia@srvm1 ~]$ ibv_uc_pingpong -s 4096 -g 1 -n 10000 192.168.30.10
  local address:  LID 0x0000, QPN 0x000011, PSN 0x7daab0, GID
::ffff:192.168.29.10
  remote address: LID 0x0000, QPN 0x000011, PSN 0xdd96cf, GID
::ffff:192.168.30.10
81920000 bytes in 67.86 seconds = 9.66 Mbit/sec
10000 iters in 67.86 seconds = 6786.20 usec/iter

--------------------------------------------------------------------------

Then I repeated the ibv_rc_pingpong experiments with different message sizes,
and tried both polling/event mode. And I also measured the CPU utilization of
the ibv_rc_pingpong process. The result is shown in the attached figure. 'poll'
means polling mode, where ibv_rc_pingpong is issued without '-e' option; while
'int' (interrupt mode) represents the event mode with '-e' enabled. It seems
the CPU is saturated when SoftRoCE throughput goes up to ~2Gbit/s. This does
not make sense since udp and tcp can do much better. Could there be some
optimization for SoftRoCE implementation?

ibv_devinfo information:
--------------------------------------------------------------------------
[weijia@srvm1 ~]$ ibv_devinfo
hca_id: rxe0
        transport:                      InfiniBand (0)
        fw_ver:                         0.0.0
        node_guid:                      5054:00ff:fe4b:d859
        sys_image_guid:                 0000:0000:0000:0000
        vendor_id:                      0x0000
        vendor_part_id:                 0
        hw_ver:                         0x0
        phys_port_cnt:                  1
                port:   1
                        state:                  PORT_ACTIVE (4)
                        max_mtu:                4096 (5)
                        active_mtu:             1024 (3)
                        sm_lid:                 0
                        port_lid:               0
                        port_lmc:               0x00
                        link_layer:             Ethernet

--------------------------------------------------------------------------

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-12-25 10:00 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-23  3:59 [Bug 190951] New: SoftRoCE Performance Puzzle bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r
     [not found] ` <bug-190951-11804-3bo0kxnWaOQUvHkbgXJLS5sdmw4N0Rt+2LY78lusg7I@public.gmane.org/>
2016-12-25 10:00   ` Leon Romanovsky

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox