From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: Tristan Madani <tristmd@gmail.com>,
Zhu Yanjun <zyjzyj2000@gmail.com>, Jason Gunthorpe <jgg@ziepe.ca>,
Leon Romanovsky <leon@kernel.org>,
"yanjun.zhu@linux.dev" <yanjun.zhu@linux.dev>
Cc: linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
Tristan Madani <tristan@talencesecurity.com>
Subject: Re: [PATCH v10 1/2] RDMA/rxe: copy send WQE to kernel buffer before processing
Date: Fri, 30 Oct 2026 15:20:46 -0700 [thread overview]
Message-ID: <f04883fc-563b-41f9-988f-9b8f22c3129c@linux.dev> (raw)
In-Reply-To: <20261030193235.3470653-2-tristan@talencesecurity.com>
在 2026/10/30 12:32, Tristan Madani 写道:
> The rxe send queue is mapped into userspace via mmap. The requester
> processes Work Queue Entries (WQEs) directly from this shared buffer
> without first copying them to kernel memory. Userspace can modify WQE
> fields (num_sge, sge_offset, SGE entries) between kernel reads,
> leading to inconsistent state in copy_data().
>
> This is the send-path counterpart to the receive-path fixes:
> - commit 22b8fbded65b8 ("RDMA/rxe: Fix TOCTOU heap overflow in
> get_srq_wqe")
> - commit d6ab440240a04 ("RDMA/rxe: Copy WQE to local buffer in
> non-SRQ receive path")
>
> Fix by copying the send WQE to a kernel-private buffer in req_next_wqe()
> before processing. The copy uses the full queue element data size
> (max of max_sge SGEs and max_inline bytes) so that both SGE entries
> and inline data are always captured.
>
> After copying, reject out-of-range opcodes by setting mask to 0 so that
> next_opcode() transitions the QP to error state. Clamp atomic write
> residual to exactly sizeof(u64) to prevent finish_packet() from reading
> past the WQE buffer or leaking uninitialized pad bytes. The WR-level
> mask (WR_ATOMIC_WRITE_MASK) is checked since wr_opcode_mask() populates
> wqe->mask from enum rxe_wr_mask.
>
> The local copy is reused across multi-packet sends to preserve DMA
> progress state (cur_sge, sge_offset, resid). Field updates including
> DMA progress are written back to the shared queue using WRITE_ONCE()
> for individual fields and smp_store_release() for state transitions,
> so the completer and userspace observe consistent values without the
> tearing risk of bulk memcpy(). DMA progress writeback ensures retries
> can resume from the correct offset.
>
> The copy is invalidated when the WQE index advances (last packet sent,
> error, local ops, UD oversized), when a retry resets WQE state, on QP
> reset, or when the QP enters error state for flush.
>
> Fixes: 8700e3e7c485 ("Soft RoCE driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Thanks a lot for your efforts.
I am fine with this.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Zhu Yanjun
> ---
>
> Changes since v9:
> - Atomic write resid: check != sizeof(u64) instead of just > to also
> catch undersized resid that would leak uninitialized skb pad bytes
> (sashiko finding).
> - Bisection fix: move qp->comp.comp_wqe_valid invalidation from
> this patch to patch 2/2, since comp_wqe_valid is defined there
> (sashiko finding).
>
> Changes since v8:
> - Fix atomic write resid check: use WR_ATOMIC_WRITE_MASK (WR-level
> mask) instead of RXE_ATOMIC_WRITE_MASK (packet-level mask) so the
> condition actually fires for IB_WR_ATOMIC_WRITE WQEs (sashiko
> finding).
> - Fix atomic write rejection: clamp dma.resid to sizeof(u64) instead
> of setting mask to 0, since next_opcode() ignores wqe->mask and
> uses wqe->wr.opcode directly (sashiko finding).
>
> Changes since v7:
> - Reject atomic write WQEs with oversized dma.resid to prevent
> OOB read in finish_packet() (sashiko finding).
>
> Changes since v6:
> - Fixed all sashiko review findings (2 Critical + 9 High).
> - FORTIFY_SOURCE: memcpy into enclosing struct, not inner member.
> - Copy size: max(max_sge * sizeof(ib_sge), max_inline).
> - Opcode bound: IB_WR_REG_MR (was IB_WR_ATOMIC_WRITE).
> - Removed silent num_sge clamp, use mask=0 for invalid opcodes.
> - DMA progress writeback (resid, cur_sge, sge_offset).
> - Addressed Zhu Yanjun review feedback.
>
> Changes since v5:
> - Added opcode bounds check and num_sge clamp after copy.
>
> Changes since v4:
> - Resent from the correct sender address.
>
> Changes since v3:
> - Copy full queue element (max_sge SGEs) instead of per-WQE size.
> - Invalidate on QP reset, ERR flush, RESET state check.
>
> Changes since v2:
> - WRITE_ONCE/smp_store_release for field writeback.
>
> Changes since v1:
> - Split into per-path patches. Cache across multi-packet ops.
>
> drivers/infiniband/sw/rxe/rxe_qp.c | 1 +
> drivers/infiniband/sw/rxe/rxe_req.c | 71 +++++++++++++++++++++++++--
> drivers/infiniband/sw/rxe/rxe_verbs.h | 6 +++
> 3 files changed, 73 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
> index 311f285d78a6b..77606c4a039b1 100644
> --- a/drivers/infiniband/sw/rxe/rxe_qp.c
> +++ b/drivers/infiniband/sw/rxe/rxe_qp.c
> @@ -581,6 +581,7 @@ static void rxe_qp_reset(struct rxe_qp *qp)
> qp->req.need_retry = 0;
> qp->req.wait_for_rnr_timer = 0;
> qp->req.noack_pkts = 0;
> + qp->req.send_wqe_valid = false;
> qp->resp.msn = 0;
> qp->resp.opcode = -1;
> qp->resp.drop_msg = 0;
> diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
> index 24f5c044363f7..dd8ad19ed1d86 100644
> --- a/drivers/infiniband/sw/rxe/rxe_req.c
> +++ b/drivers/infiniband/sw/rxe/rxe_req.c
> @@ -161,6 +161,26 @@ static void req_check_sq_drain_done(struct rxe_qp *qp)
> spin_unlock_irqrestore(&qp->state_lock, flags);
> }
>
> +static void rxe_req_writeback_wqe(struct rxe_qp *qp)
> +{
> + struct rxe_send_wqe *shared = qp->req.shared_wqe;
> + struct rxe_send_wqe *local = &qp->req.send_wqe.wqe;
> +
> + if (!qp->req.send_wqe_valid || !shared)
> + return;
> +
> + WRITE_ONCE(shared->status, local->status);
> + WRITE_ONCE(shared->first_psn, local->first_psn);
> + WRITE_ONCE(shared->last_psn, local->last_psn);
> + WRITE_ONCE(shared->mask, local->mask);
> + WRITE_ONCE(shared->has_rd_atomic, local->has_rd_atomic);
> + WRITE_ONCE(shared->dma.resid, local->dma.resid);
> + WRITE_ONCE(shared->dma.cur_sge, local->dma.cur_sge);
> + WRITE_ONCE(shared->dma.sge_offset, local->dma.sge_offset);
> + /* State must be last so the completer sees prior updates */
> + smp_store_release(&shared->state, local->state);
> +}
> +
> static struct rxe_send_wqe *__req_next_wqe(struct rxe_qp *qp)
> {
> struct rxe_queue *q = qp->sq.queue;
> @@ -193,7 +213,35 @@ static struct rxe_send_wqe *req_next_wqe(struct rxe_qp *qp)
> }
> spin_unlock_irqrestore(&qp->state_lock, flags);
>
> - wqe->mask = wr_opcode_mask(wqe->wr.opcode, qp);
> + /* Reuse the existing kernel-private copy if still valid */
> + if (qp->req.send_wqe_valid && qp->req.shared_wqe == wqe)
> + return &qp->req.send_wqe.wqe;
> +
> + /* Copy WQE from userspace-mapped shared queue to kernel-private
> + * buffer. Copy size matches the queue element data area.
> + */
> + memcpy(&qp->req.send_wqe, wqe, sizeof(*wqe) +
> + max_t(int, qp->sq.max_sge * sizeof(struct ib_sge),
> + qp->sq.max_inline));
> + qp->req.shared_wqe = wqe;
> + qp->req.send_wqe_valid = true;
> +
> + wqe = &qp->req.send_wqe.wqe;
> +
> + /* Prevent OOB in wr_opcode_mask() for corrupted opcodes.
> + * Mask 0 causes next_opcode() to fail, moving QP to error state.
> + */
> + if (unlikely(wqe->wr.opcode > IB_WR_REG_MR))
> + wqe->mask = 0;
> + else
> + wqe->mask = wr_opcode_mask(wqe->wr.opcode, qp);
> +
> + /* Atomic writes carry exactly sizeof(u64) payload.
> + * Clamp oversized resid to prevent OOB read in finish_packet().
> + */
> + if (unlikely((wqe->mask & WR_ATOMIC_WRITE_MASK) &&
> + wqe->dma.resid != sizeof(u64)))
> + wqe->dma.resid = sizeof(u64);
> return wqe;
> }
>
> @@ -582,9 +630,13 @@ static void update_state(struct rxe_qp *qp, struct rxe_pkt_info *pkt)
> {
> qp->req.opcode = pkt->opcode;
>
> - if (pkt->mask & RXE_END_MASK)
> + rxe_req_writeback_wqe(qp);
> +
> + if (pkt->mask & RXE_END_MASK) {
> qp->req.wqe_index = queue_next_index(qp->sq.queue,
> qp->req.wqe_index);
> + qp->req.send_wqe_valid = false;
> + }
>
> qp->need_req_skb = 0;
>
> @@ -634,7 +686,9 @@ static int rxe_do_local_ops(struct rxe_qp *qp, struct rxe_send_wqe *wqe)
>
> wqe->state = wqe_state_done;
> wqe->status = IB_WC_SUCCESS;
> + rxe_req_writeback_wqe(qp);
> qp->req.wqe_index = queue_next_index(qp->sq.queue, qp->req.wqe_index);
> + qp->req.send_wqe_valid = false;
>
> return 0;
> }
> @@ -666,6 +720,7 @@ int rxe_requester(struct rxe_qp *qp)
> wqe = __req_next_wqe(qp);
> spin_unlock_irqrestore(&qp->state_lock, flags);
> if (wqe) {
> + qp->req.send_wqe_valid = false;
> wqe->status = IB_WC_WR_FLUSH_ERR;
> goto err;
> } else {
> @@ -681,6 +736,7 @@ int rxe_requester(struct rxe_qp *qp)
> qp->req.wait_psn = 0;
> qp->req.need_retry = 0;
> qp->req.wait_for_rnr_timer = 0;
> + qp->req.send_wqe_valid = false;
> spin_unlock_irqrestore(&qp->state_lock, flags);
> goto exit;
> }
> @@ -695,6 +751,7 @@ int rxe_requester(struct rxe_qp *qp)
> if (unlikely(qp->req.need_retry && !qp->req.wait_for_rnr_timer)) {
> req_retry(qp);
> qp->req.need_retry = 0;
> + qp->req.send_wqe_valid = false;
> }
>
> wqe = req_next_wqe(qp);
> @@ -772,10 +829,12 @@ int rxe_requester(struct rxe_qp *qp)
> wqe->last_psn = qp->req.psn;
> qp->req.psn = (qp->req.psn + 1) & BTH_PSN_MASK;
> qp->req.opcode = IB_OPCODE_UD_SEND_ONLY;
> - qp->req.wqe_index = queue_next_index(qp->sq.queue,
> - qp->req.wqe_index);
> wqe->state = wqe_state_done;
> wqe->status = IB_WC_SUCCESS;
> + rxe_req_writeback_wqe(qp);
> + qp->req.wqe_index = queue_next_index(qp->sq.queue,
> + qp->req.wqe_index);
> + qp->req.send_wqe_valid = false;
> goto done;
> }
> payload = mtu;
> @@ -839,8 +898,10 @@ int rxe_requester(struct rxe_qp *qp)
> goto out;
> err:
> /* update wqe_index for each wqe completion */
> - qp->req.wqe_index = queue_next_index(qp->sq.queue, qp->req.wqe_index);
> wqe->state = wqe_state_error;
> + rxe_req_writeback_wqe(qp);
> + qp->req.wqe_index = queue_next_index(qp->sq.queue, qp->req.wqe_index);
> + qp->req.send_wqe_valid = false;
> rxe_qp_error(qp);
> exit:
> ret = -EAGAIN;
> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
> index 0f5ffd94643f9..a22dfc6e5ae3c 100644
> --- a/drivers/infiniband/sw/rxe/rxe_verbs.h
> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
> @@ -114,6 +114,12 @@ struct rxe_req_info {
> int wait_for_rnr_timer;
> int noack_pkts;
> int again;
> + struct rxe_send_wqe *shared_wqe;
> + bool send_wqe_valid;
> + struct {
> + struct rxe_send_wqe wqe;
> + struct ib_sge sge[RXE_MAX_SGE];
> + } send_wqe;
> };
>
> struct rxe_comp_info {
next prev parent reply other threads:[~2026-10-30 22:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 19:32 [PATCH v10 0/2] RDMA/rxe: copy send WQE to kernel buffer (TOCTOU hardening) Tristan Madani
2026-10-30 19:32 ` [PATCH v10 1/2] RDMA/rxe: copy send WQE to kernel buffer before processing Tristan Madani
2026-10-30 19:45 ` sashiko-bot
2026-10-30 22:20 ` Zhu Yanjun [this message]
2026-10-30 19:32 ` [PATCH v10 2/2] RDMA/rxe: copy send WQE to kernel buffer in completer path Tristan Madani
2026-10-30 19:50 ` sashiko-bot
2026-10-30 22:22 ` Zhu Yanjun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f04883fc-563b-41f9-988f-9b8f22c3129c@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tristan@talencesecurity.com \
--cc=tristmd@gmail.com \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox