Linux RDMA and InfiniBand development
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Konstantin Taranov" <kotaranov@linux.microsoft.com>
Cc: linux-rdma@vger.kernel.org
Subject: Re: [PATCH rdma-next v4 01/10] RDMA/mana_ib: Allocate and map fast-registration MRs
Date: Sat, 10 Oct 2026 07:07:22 +0000	[thread overview]
Message-ID: <sashiko-outbox-166293@kernel.org> (raw)
In-Reply-To: <20261010065443.3554193-2-kotaranov@linux.microsoft.com>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] rdma: missing bounds check on max_num_sg leading to integer overflow and OOB write
- [Low] rdma: hardware structure defined using compiler-dependent C bitfields
--

commit 7ef4d39c8200798999dc9e55ae57d45e1ec08621
Author: Konstantin Taranov <kotaranov@microsoft.com>

RDMA/mana_ib: Allocate and map fast-registration MRs

Implement alloc_mr and map_mr_sg for memory-registration MRs.

> diff --git a/drivers/infiniband/hw/mana/mana_ib.h b/drivers/infiniband/hw/mana/mana_ib.h
> index 9173ca64d2e1e..da9b48b422a1c 100644
> --- a/drivers/infiniband/hw/mana/mana_ib.h
> +++ b/drivers/infiniband/hw/mana/mana_ib.h

[ ... ]

> +#define MANA_FMR_MST_ALIGNMENT 64
> +
> +struct mana_fmr_mst_entry {
> +	u32 reserved1;
> +	u32 reserved2		: 8;
> +	u32 page_size		: 5;
> +	u32 reserved3		: 3;
> +	u32 access_right	: 8;
> +	u32 addr_type		: 2;
> +	u32 reserved4		: 6;
> +	u32 reserved5[2];
> +	u64 start_va;
> +	u64 length;
> +	u32 reserved6[8];
> +}; /* HW DATA */

[Severity: Low]
This structure defines a hardware interface but uses C bitfields. Are there
risks of compiler-dependent memory layout causing portability issues when used
for hardware ABI?

> +
> +static inline u32 mana_ib_fmr_header_offset(u32 num_ptes)
> +{
> +	/* The header follows the PTEs with the required MST alignment. */
> +	return ALIGN(sizeof(u64) * num_ptes, MANA_FMR_MST_ALIGNMENT);
> +}

[Severity: High]
Could sizeof(u64) * num_ptes produce a 64-bit value that is silently truncated
by the u32 return type when num_ptes is very large?

[ ... ]

> diff --git a/drivers/infiniband/hw/mana/mr.c b/drivers/infiniband/hw/mana/mr.c
> index 1233685b4b890..34dcc50d0be96 100644
> --- a/drivers/infiniband/hw/mana/mr.c
> +++ b/drivers/infiniband/hw/mana/mr.c

[ ... ]

> +struct ib_mr *mana_ib_alloc_mr(struct ib_pd *ibpd, enum ib_mr_type mr_type,
> +			       u32 max_num_sg)
> +{
> +	struct mana_ib_pd *pd = container_of(ibpd, struct mana_ib_pd, ibpd);
> +	struct gdma_create_mr_params mr_params = {};
> +	struct gdma_context *gc;
> +	struct mana_ib_dev *dev;
> +	struct mana_ib_mr *mr;
> +	int err;
> +
> +	dev = container_of(ibpd->device, struct mana_ib_dev, ib_dev);
> +	gc = mdev_to_gc(dev);
> +
> +	if (mr_type != IB_MR_TYPE_MEM_REG)
> +		return ERR_PTR(-EOPNOTSUPP);
> +
> +	mr = kzalloc_obj(*mr);
> +	if (!mr)
> +		return ERR_PTR(-ENOMEM);
> +
> +	mr->fmr.max_ptes = max_num_sg;
> +	mr->fmr.size = mana_ib_fmr_buf_sz(max_num_sg);
> +	mr->fmr.ptes = dma_alloc_coherent(gc->dev, mr->fmr.size, &mr->fmr.dma_handle,
> +					  GFP_KERNEL);

[Severity: High]
Since max_num_sg is used without validation, is it possible for an excessively
large value to result in an undersized allocation for mr->fmr.ptes, given the
potential truncation in mana_ib_fmr_header_offset() called by
mana_ib_fmr_buf_sz()?

[ ... ]

> +static int mana_ib_set_page(struct ib_mr *ibmr, u64 addr)
> +{
> +	struct mana_ib_mr *mr = container_of(ibmr, struct mana_ib_mr, ibmr);
> +
> +	if (mr->fmr.pte_count >= mr->fmr.max_ptes)
> +		return -ENOMEM;
> +
> +	mr->fmr.ptes[mr->fmr.pte_count] = addr | MANA_PTE_VALID_MASK;
> +	mr->fmr.pte_count++;
> +
> +	return 0;
> +}

[Severity: High]
If mr->fmr.size was truncated to a small value, but mr->fmr.max_ptes retains
the original large max_num_sg value, would this bounds check be insufficient to
prevent out-of-bounds writes into memory past the allocated DMA buffer?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261010065443.3554193-1-kotaranov@linux.microsoft.com?part=1

  reply	other threads:[~2026-10-10  7:07 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-10  6:54 [PATCH rdma-next v4 00/10] RDMA/mana_ib: Add kernel RC and fast registration support Konstantin Taranov
2026-10-10  6:54 ` [PATCH rdma-next v4 01/10] RDMA/mana_ib: Allocate and map fast-registration MRs Konstantin Taranov
2026-10-10  7:07   ` sashiko-bot [this message]
2026-10-10  6:54 ` [PATCH rdma-next v4 02/10] RDMA/mana: Create and destroy kernel RC QPs Konstantin Taranov
2026-10-10  7:11   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 03/10] net/mana: Extend GDMA encoding for new RDMA WQEs Konstantin Taranov
2026-10-10  7:11   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 04/10] RDMA/mana_ib: Maintain kernel RC QP state Konstantin Taranov
2026-10-10  7:13   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 05/10] RDMA/mana_ib: Post receive WRs on kernel RC QPs Konstantin Taranov
2026-10-10  7:08   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 06/10] RDMA/mana_ib: Post send and memory-management WRs on " Konstantin Taranov
2026-10-10  7:15   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 07/10] RDMA/mana_ib: Poll RC completions using PSN and FSN progress Konstantin Taranov
2026-10-10  7:11   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 08/10] RDMA/mana_ib: Flush and notify CQs when kernel QPs enter ERR Konstantin Taranov
2026-10-10  7:15   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 09/10] RDMA/mana_ib: Handle error CQEs for RC QPs Konstantin Taranov
2026-10-10  7:11   ` sashiko-bot
2026-10-10  6:54 ` [PATCH rdma-next v4 10/10] RDMA/mana_ib: Drain kernel receive and send queues Konstantin Taranov
2026-10-10  7:13   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-166293@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=kotaranov@linux.microsoft.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox