From: sashiko-bot@kernel.org
To: "Tariq Toukan" <tariqt@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Subject: Re: [PATCH net-next V2 1/5] net/mlx5: E-switch, add match-metadata allocator for nested VF/SF eswitches
Date: Sat, 21 Nov 2026 08:02:30 +0000 [thread overview]
Message-ID: <sashiko-outbox-226812@kernel.org> (raw)
In-Reply-To: <20261120075959.2533702-2-tariqt@nvidia.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] net/mlx5: inverted virt-LAG check in
mlx5_esw_match_metadata_alloc()
--
commit a97c2078b8815e78906668a4a9a37e37bc914d39
Author: Shay Drory <shayd@nvidia.com>
net/mlx5: E-switch, add match-metadata allocator for nested VF/SF eswitches
This commit adds a match-metadata allocator for nested (virt LAG) VF/SF
eswitches that splits the source-port metadata into an 8-bit LAG slot
index and an 8-bit vport ID.
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
> index 1323114ce7f93..3c1355f910906 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
> @@ -3650,6 +3650,48 @@ static u32 mlx5_esw_match_metadata_reserved(struct mlx5_eswitch *esw)
> return MLX5_ESW_METADATA_RSVD_UPLINK;
> }
>
> +/* Nested (virt LAG) source-port metadata layout: the upper ESW_NESTED_IDX_BITS
> + * hold the VF/SF's slot in the LAG and the lower ESW_NESTED_VPORT_BITS hold a
> + * vport id unique within its eswitch. The two fields still sum to
> + * ESW_SOURCE_PORT_METADATA_BITS. The LAG slot (0-254, per the xa_alloc() limit
> + * in mlx5_ldev_add_mdev()) fits in ESW_NESTED_IDX_BITS; slots 0xf0 and up would
> + * drive the PFNUM bits to the 0xf reserved by internal port offload, so only
> + * 0-239 are used.
> + */
> +#define ESW_NESTED_VPORT_BITS 8
> +#define ESW_NESTED_IDX_BITS (ESW_SOURCE_PORT_METADATA_BITS - ESW_NESTED_VPORT_BITS)
> +
> +static u32 mlx5_nested_esw_match_metadata_alloc(struct mlx5_eswitch *esw)
> +{
> + u32 vport_end_ida = (1 << ESW_NESTED_VPORT_BITS) - 1;
> + u32 max_idx = (1 << ESW_NESTED_IDX_BITS) -
> + (1 << (ESW_NESTED_IDX_BITS - ESW_PFNUM_BITS)) - 1;
> + int idx;
> + int id;
> +
> + idx = mlx5_lag_get_member_idx(esw->dev);
> + if (idx < 0 || idx > max_idx)
> + return 0;
> +
> + /* Use only non-zero id's (2-255). */
> + id = ida_alloc_range(&esw->offloads.vport_metadata_ida,
> + MLX5_ESW_METADATA_RSVD_UPLINK + 1,
> + vport_end_ida, GFP_KERNEL);
> + if (id < 0)
> + return 0;
> + id = (idx << ESW_NESTED_VPORT_BITS) | id;
> + return id;
> +}
> +
> +static void mlx5_nested_esw_match_metadata_free(struct mlx5_eswitch *esw,
> + u32 metadata)
> +{
> + u32 vport_bit_mask = (1 << ESW_NESTED_VPORT_BITS) - 1;
> +
> + /* Metadata holds only ESW_NESTED_VPORT_BITS of actual ida id. */
> + ida_free(&esw->offloads.vport_metadata_ida, metadata & vport_bit_mask);
> +}
> +
> u32 mlx5_esw_match_metadata_alloc(struct mlx5_eswitch *esw)
> {
> u32 vport_end_ida = (1 << ESW_VPORT_BITS) - 1;
> @@ -3658,6 +3700,9 @@ u32 mlx5_esw_match_metadata_alloc(struct mlx5_eswitch *esw)
> int pf_num;
> int id;
>
> + if (!mlx5_core_is_pf(esw->dev) && !mlx5_virt_lag_nonmember(esw->dev))
> + return mlx5_nested_esw_match_metadata_alloc(esw);
> +
> /* Only 4 bits of pf_num */
> pf_num = mlx5_sd_pf_num_get(esw->dev);
> if (pf_num < 0 || pf_num > max_pf_num)
> @@ -3678,6 +3723,9 @@ void mlx5_esw_match_metadata_free(struct mlx5_eswitch *esw, u32 metadata)
> {
> u32 vport_bit_mask = (1 << ESW_VPORT_BITS) - 1;
>
> + if (!mlx5_core_is_pf(esw->dev) && !mlx5_virt_lag_nonmember(esw->dev))
> + return mlx5_nested_esw_match_metadata_free(esw, metadata);
> +
> /* Metadata contains only 12 bits of actual ida id */
> ida_free(&esw->offloads.vport_metadata_ida, metadata & vport_bit_mask);
> }
[Severity: High]
As reported by Shay Drory on v1 [1], does negating
mlx5_virt_lag_nonmember(esw->dev) route non-PF eswitches that do not
support virt LAG into mlx5_nested_esw_match_metadata_alloc()?
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h:mlx5_virt_lag_nonmember() {
return mlx5_virt_lag_is_supported(dev) && !mlx5_lag_dev(dev);
}
When mlx5_virt_lag_is_supported(esw->dev) is false on a standalone VF or
SF eswitch manager, mlx5_lag_dev(esw->dev) is NULL and
mlx5_virt_lag_nonmember(esw->dev) returns false. That dispatches
mlx5_esw_match_metadata_alloc() to mlx5_nested_esw_match_metadata_alloc(),
where mlx5_lag_get_member_idx(esw->dev) returns -ENOENT and metadata
allocation returns 0, causing esw_offloads_vport_metadata_setup() to fail
with -ENOSPC when enabling switchdev mode.
Should mlx5_esw_match_metadata_alloc() and mlx5_esw_match_metadata_free()
check mlx5_lag_dev(esw->dev) instead of !mlx5_virt_lag_nonmember(esw->dev)?
[1] https://lore.kernel.org/r/20261110093136.377962-1-shayd@nvidia.com
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120075959.2533702-1-tariqt@nvidia.com?part=1
next prev parent reply other threads:[~2026-11-21 8:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 7:59 [PATCH net-next V2 0/5] net/mlx5: LAG over VFs/SFs (virtual LAG) Tariq Toukan
2026-11-20 7:59 ` [PATCH net-next V2 1/5] net/mlx5: E-switch, add match-metadata allocator for nested VF/SF eswitches Tariq Toukan
2026-11-21 8:02 ` sashiko-bot [this message]
2026-11-20 7:59 ` [PATCH net-next V2 2/5] net/mlx5: E-switch, match master egress rule by vport metadata Tariq Toukan
2026-11-20 7:59 ` [PATCH net-next V2 3/5] net/mlx5: E-switch, drop master egress rule under a SW vport LAG Tariq Toukan
2026-11-20 7:59 ` [PATCH net-next V2 4/5] net/mlx5e: Register eswitch-manager VF/SF self-port with switch-id Tariq Toukan
2026-11-21 8:02 ` sashiko-bot
2026-11-20 7:59 ` [PATCH net-next V2 5/5] net/mlx5: LAG, enable LAG over functions that do not represent a physical port Tariq Toukan
2026-11-21 8:02 ` sashiko-bot
2026-11-21 8:02 ` [PATCH net-next V2 0/5] net/mlx5: LAG over VFs/SFs (virtual LAG) sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-226812@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox