From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 16 Dec 2019 09:42:51 +0100 (CET) From: =?utf-8?Q?Cl=C3=A9ment?= Leger Message-ID: <1428337657.96784882.1576485771590.JavaMail.zimbra@kalray.eu> In-Reply-To: <1576362603.3.5@crapouillou.net> References: <20191210164014.50739-1-paul@crapouillou.net> <20191210164014.50739-3-paul@crapouillou.net> <1576362603.3.5@crapouillou.net> Subject: Re: [PATCH v4 3/5] remoteproc: Add prepare/unprepare callbacks MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable To: Paul Cercueil Cc: Fabien DESSENNE , Ohad Ben-Cohen , Bjorn Andersson , Rob Herring , Mark Rutland , od@zcrc.me, linux-remoteproc , devicetree , linux-kernel List-ID: Hi Paul ----- On 14 Dec, 2019, at 23:30, Paul Cercueil paul@crapouillou.net wrote: > Hi Fabien, >=20 >=20 > Le jeu., d=C3=A9c. 12, 2019 at 10:03, Fabien DESSENNE > a =C3=A9crit : >> Hi Paul >>=20 >>=20 >> On 10/12/2019 5:40 PM, Paul Cercueil wrote: >>> The .prepare() callback is called before the firmware is loaded to >>> memory. This is useful for instance in the case where some setup is >>> required for the memory to be accessible. >>=20 >>=20 >> I am trying to figure out what king of 'setup' may be required. From >> the >> ingenic driver I understand that you need to enable clocks to allow >> some >> memory access. >>=20 >> Instead of adding this new ops, why not enabling clocks in probe()? >=20 > Enabling the clocks in the probe means that the clocks will be > unconditionally enabled until the driver is removed, even if the remote > processor end up being unused. That would be a waste of power. We have the same kind of "problem" for k1c remoteproc driver (not yet upstream, depends on new arch). We need to enable clocks to load code into remote processor memory and currently we do that in probe. However, as you stated, we would like to enable them as late as possible (just before loading code) to avoid wasting power unnecessarily. So the "prepare" callback totally makes sense. Regards, Cl=C3=A9ment >=20 > Cheers, > -Paul >=20 >=20 >>=20 >> BR >>=20 >> Fabien >>=20 >>=20 >>>=20 >>> Signed-off-by: Paul Cercueil >>> --- >>>=20 >>> Notes: >>> v2-v4: No change >>>=20 >>> drivers/remoteproc/remoteproc_core.c | 16 +++++++++++++++- >>> include/linux/remoteproc.h | 4 ++++ >>> 2 files changed, 19 insertions(+), 1 deletion(-) >>>=20 >>> diff --git a/drivers/remoteproc/remoteproc_core.c >>> b/drivers/remoteproc/remoteproc_core.c >>> index 0a9fc7fdd1c3..3ea5f675a148 100644 >>> --- a/drivers/remoteproc/remoteproc_core.c >>> +++ b/drivers/remoteproc/remoteproc_core.c >>> @@ -1299,11 +1299,19 @@ static int rproc_start(struct rproc *rproc, >>> const struct firmware *fw) >>> =09struct device *dev =3D &rproc->dev; >>> =09int ret; >>>=20 >>> +=09if (rproc->ops->prepare) { >>> +=09=09ret =3D rproc->ops->prepare(rproc); >>> +=09=09if (ret) { >>> +=09=09=09dev_err(dev, "Failed to prepare rproc: %d\n", ret); >>> +=09=09=09return ret; >>> +=09=09} >>> +=09} >>> + >>> =09/* load the ELF segments to memory */ >>> =09ret =3D rproc_load_segments(rproc, fw); >>> =09if (ret) { >>> =09=09dev_err(dev, "Failed to load program segments: %d\n", ret); >>> -=09=09return ret; >>> +=09=09goto unprepare_rproc; >>> =09} >>>=20 >>> =09/* >>> @@ -1354,6 +1362,9 @@ static int rproc_start(struct rproc *rproc, >>> const struct firmware *fw) >>> =09rproc_unprepare_subdevices(rproc); >>> reset_table_ptr: >>> =09rproc->table_ptr =3D rproc->cached_table; >>> +unprepare_rproc: >>> +=09if (rproc->ops->unprepare) >>> +=09=09rproc->ops->unprepare(rproc); >>>=20 >>> =09return ret; >>> } >>> @@ -1483,6 +1494,9 @@ static int rproc_stop(struct rproc *rproc, >>> bool crashed) >>>=20 >>> =09rproc->state =3D RPROC_OFFLINE; >>>=20 >>> +=09if (rproc->ops->unprepare) >>> +=09=09rproc->ops->unprepare(rproc); >>> + >>> =09dev_info(dev, "stopped remote processor %s\n", rproc->name); >>>=20 >>> =09return 0; >>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >>> index 5f201f0c86c3..a6272d1ba384 100644 >>> --- a/include/linux/remoteproc.h >>> +++ b/include/linux/remoteproc.h >>> @@ -355,6 +355,8 @@ enum rsc_handling_status { >>>=20 >>> /** >>> * struct rproc_ops - platform-specific device handlers >>> + * @prepare:=09prepare the device for power up (before the firmware >>> is loaded) >>> + * @unprepare:=09unprepare the device after it is stopped >>> * @start:=09power on the device and boot it >>> * @stop:=09power off the device >>> * @kick:=09kick a virtqueue (virtqueue id given as a parameter) >>> @@ -371,6 +373,8 @@ enum rsc_handling_status { >>> * @get_boot_addr:=09get boot address to entry point specified in >>> firmware >>> */ >>> struct rproc_ops { >>> +=09int (*prepare)(struct rproc *rproc); >>> +=09void (*unprepare)(struct rproc *rproc); >>> =09int (*start)(struct rproc *rproc); >>> =09int (*stop)(struct rproc *rproc); > >> =09void (*kick)(struct rproc *rproc, int vqid);