From: Rishabh Bhatnagar <rishabhb@codeaurora.org>
To: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: bjorn.andersson@linaro.org, tsoni@codeaurora.org,
psodagud@codeaurora.org, sidgup@codeaurora.org,
Rishabh Bhatnagar <rishabhb@codeaurora.org>
Subject: [PATCH v4 2/2] remoteproc: qcom: Add notification types to SSR
Date: Wed, 27 May 2020 20:34:43 -0700 [thread overview]
Message-ID: <1590636883-30866-3-git-send-email-rishabhb@codeaurora.org> (raw)
In-Reply-To: <1590636883-30866-1-git-send-email-rishabhb@codeaurora.org>
From: Siddharth Gupta <sidgup@codeaurora.org>
The SSR subdevice only adds callback for the unprepare event. Add callbacks
for unprepare, start and prepare events. The client driver for a particular
remoteproc might be interested in knowing the status of the remoteproc
while undergoing SSR, not just when the remoteproc has finished shutting
down.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
drivers/remoteproc/qcom_common.c | 46 +++++++++++++++++++++++++++++++++--
include/linux/remoteproc/qcom_rproc.h | 14 +++++++++++
2 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c
index 61ff2dd..5c5a1eb 100644
--- a/drivers/remoteproc/qcom_common.c
+++ b/drivers/remoteproc/qcom_common.c
@@ -228,7 +228,7 @@ struct qcom_ssr_subsystem *qcom_ssr_get_subsys(const char *name)
*
* This registers the @nb notifier block as part the notifier chain for a
* remoteproc associated with @name. The notifier block's callback
- * will be invoked when the particular remote processor is stopped.
+ * will be invoked when the particular remote processor is started/stopped.
*/
void *qcom_register_ssr_notifier(const char *name, struct notifier_block *nb)
{
@@ -258,6 +258,44 @@ int qcom_unregister_ssr_notifier(void *notify, struct notifier_block *nb)
}
EXPORT_SYMBOL_GPL(qcom_unregister_ssr_notifier);
+static int ssr_notify_prepare(struct rproc_subdev *subdev)
+{
+ struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev);
+ struct qcom_ssr_notif_data data = {
+ .name = ssr->info->name,
+ .crashed = false,
+ };
+
+ srcu_notifier_call_chain(&ssr->info->notifier_list,
+ QCOM_SSR_BEFORE_POWERUP, &data);
+ return 0;
+}
+
+static int ssr_notify_start(struct rproc_subdev *subdev)
+{
+ struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev);
+ struct qcom_ssr_notif_data data = {
+ .name = ssr->info->name,
+ .crashed = false,
+ };
+
+ srcu_notifier_call_chain(&ssr->info->notifier_list,
+ QCOM_SSR_AFTER_POWERUP, &data);
+ return 0;
+}
+
+static void ssr_notify_stop(struct rproc_subdev *subdev, bool crashed)
+{
+ struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev);
+ struct qcom_ssr_notif_data data = {
+ .name = ssr->info->name,
+ .crashed = crashed,
+ };
+
+ srcu_notifier_call_chain(&ssr->info->notifier_list,
+ QCOM_SSR_BEFORE_SHUTDOWN, &data);
+}
+
static void ssr_notify_unprepare(struct rproc_subdev *subdev)
{
struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev);
@@ -266,7 +304,8 @@ static void ssr_notify_unprepare(struct rproc_subdev *subdev)
.crashed = false,
};
- srcu_notifier_call_chain(&ssr->info->notifier_list, 0, &data);
+ srcu_notifier_call_chain(&ssr->info->notifier_list,
+ QCOM_SSR_AFTER_SHUTDOWN, &data);
}
@@ -294,6 +333,9 @@ void qcom_add_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr,
mutex_unlock(&qcom_ssr_subsys_lock);
ssr->info = info;
+ ssr->subdev.prepare = ssr_notify_prepare;
+ ssr->subdev.start = ssr_notify_start;
+ ssr->subdev.stop = ssr_notify_stop;
ssr->subdev.unprepare = ssr_notify_unprepare;
rproc_add_subdev(rproc, &ssr->subdev);
diff --git a/include/linux/remoteproc/qcom_rproc.h b/include/linux/remoteproc/qcom_rproc.h
index 58422b1..a558183 100644
--- a/include/linux/remoteproc/qcom_rproc.h
+++ b/include/linux/remoteproc/qcom_rproc.h
@@ -5,6 +5,20 @@
#if IS_ENABLED(CONFIG_QCOM_RPROC_COMMON)
+/**
+ * enum qcom_ssr_notif_type - Different stages of remoteproc notifications
+ * @QCOM_SSR_BEFORE_SHUTDOWN: unprepare stage of remoteproc
+ * @QCOM_SSR_AFTER_SHUTDOWN: stop stage of remoteproc
+ * @QCOM_SSR_BEFORE_POWERUP: prepare stage of remoteproc
+ * @QCOM_SSR_AFTER_POWERUP: start stage of remoteproc
+ */
+enum qcom_ssr_notif_type {
+ QCOM_SSR_BEFORE_SHUTDOWN,
+ QCOM_SSR_AFTER_SHUTDOWN,
+ QCOM_SSR_BEFORE_POWERUP,
+ QCOM_SSR_AFTER_POWERUP,
+};
+
struct qcom_ssr_notif_data {
const char *name;
bool crashed;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-05-28 3:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-28 3:34 [PATCH v4 0/2] Extend SSR notifications framework Rishabh Bhatnagar
2020-05-28 3:34 ` [PATCH v4 1/2] remoteproc: qcom: Add per subsystem SSR notification Rishabh Bhatnagar
2020-06-18 23:00 ` Alex Elder
2020-06-18 23:35 ` Bjorn Andersson
2020-06-20 19:48 ` rishabhb
2020-06-22 18:51 ` Bjorn Andersson
2020-05-28 3:34 ` Rishabh Bhatnagar [this message]
2020-06-18 23:00 ` [PATCH v4 2/2] remoteproc: qcom: Add notification types to SSR Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590636883-30866-3-git-send-email-rishabhb@codeaurora.org \
--to=rishabhb@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=psodagud@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox