* [PATCH 13/13] remoteproc: Use sychronized interface of the IOMMU-API
[not found] <1502974596-23835-1-git-send-email-joro@8bytes.org>
@ 2017-08-17 12:56 ` Joerg Roedel
2017-08-24 19:06 ` Bjorn Andersson
0 siblings, 1 reply; 2+ messages in thread
From: Joerg Roedel @ 2017-08-17 12:56 UTC (permalink / raw)
To: iommu
Cc: linux-kernel, Suravee Suthikulpanit, Joerg Roedel, Ohad Ben-Cohen,
Bjorn Andersson, linux-remoteproc
From: Joerg Roedel <jroedel@suse.de>
The map and unmap functions of the IOMMU-API changed their
semantics: They do no longer guarantee that the hardware
TLBs are synchronized with the page-table updates they made.
To make conversion easier, new synchronized functions have
been introduced which give these guarantees again until the
code is converted to use the new TLB-flush interface of the
IOMMU-API, which allows certain optimizations.
But for now, just convert this code to use the synchronized
functions so that it will behave as before.
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
drivers/remoteproc/remoteproc_core.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 564061d..16db19c 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -553,7 +553,8 @@ static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc,
if (!mapping)
return -ENOMEM;
- ret = iommu_map(rproc->domain, rsc->da, rsc->pa, rsc->len, rsc->flags);
+ ret = iommu_map_sync(rproc->domain, rsc->da,
+ rsc->pa, rsc->len, rsc->flags);
if (ret) {
dev_err(dev, "failed to map devmem: %d\n", ret);
goto out;
@@ -661,8 +662,8 @@ static int rproc_handle_carveout(struct rproc *rproc,
goto dma_free;
}
- ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len,
- rsc->flags);
+ ret = iommu_map_sync(rproc->domain, rsc->da, dma, rsc->len,
+ rsc->flags);
if (ret) {
dev_err(dev, "iommu_map failed: %d\n", ret);
goto free_mapping;
@@ -823,7 +824,8 @@ static void rproc_resource_cleanup(struct rproc *rproc)
list_for_each_entry_safe(entry, tmp, &rproc->mappings, node) {
size_t unmapped;
- unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
+ unmapped = iommu_unmap_sync(rproc->domain, entry->da,
+ entry->len);
if (unmapped != entry->len) {
/* nothing much to do besides complaining */
dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 13/13] remoteproc: Use sychronized interface of the IOMMU-API
2017-08-17 12:56 ` [PATCH 13/13] remoteproc: Use sychronized interface of the IOMMU-API Joerg Roedel
@ 2017-08-24 19:06 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2017-08-24 19:06 UTC (permalink / raw)
To: Joerg Roedel
Cc: iommu, linux-kernel, Suravee Suthikulpanit, Joerg Roedel,
Ohad Ben-Cohen, linux-remoteproc
On Thu 17 Aug 05:56 PDT 2017, Joerg Roedel wrote:
> From: Joerg Roedel <jroedel@suse.de>
>
> The map and unmap functions of the IOMMU-API changed their
> semantics: They do no longer guarantee that the hardware
> TLBs are synchronized with the page-table updates they made.
>
> To make conversion easier, new synchronized functions have
> been introduced which give these guarantees again until the
> code is converted to use the new TLB-flush interface of the
> IOMMU-API, which allows certain optimizations.
>
> But for now, just convert this code to use the synchronized
> functions so that it will behave as before.
>
> Cc: Ohad Ben-Cohen <ohad@wizery.com>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: linux-remoteproc@vger.kernel.org
> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> drivers/remoteproc/remoteproc_core.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 564061d..16db19c 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -553,7 +553,8 @@ static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc,
> if (!mapping)
> return -ENOMEM;
>
> - ret = iommu_map(rproc->domain, rsc->da, rsc->pa, rsc->len, rsc->flags);
> + ret = iommu_map_sync(rproc->domain, rsc->da,
> + rsc->pa, rsc->len, rsc->flags);
> if (ret) {
> dev_err(dev, "failed to map devmem: %d\n", ret);
> goto out;
> @@ -661,8 +662,8 @@ static int rproc_handle_carveout(struct rproc *rproc,
> goto dma_free;
> }
>
> - ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len,
> - rsc->flags);
> + ret = iommu_map_sync(rproc->domain, rsc->da, dma, rsc->len,
> + rsc->flags);
> if (ret) {
> dev_err(dev, "iommu_map failed: %d\n", ret);
> goto free_mapping;
> @@ -823,7 +824,8 @@ static void rproc_resource_cleanup(struct rproc *rproc)
> list_for_each_entry_safe(entry, tmp, &rproc->mappings, node) {
> size_t unmapped;
>
> - unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
> + unmapped = iommu_unmap_sync(rproc->domain, entry->da,
> + entry->len);
> if (unmapped != entry->len) {
> /* nothing much to do besides complaining */
> dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-08-24 19:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1502974596-23835-1-git-send-email-joro@8bytes.org>
2017-08-17 12:56 ` [PATCH 13/13] remoteproc: Use sychronized interface of the IOMMU-API Joerg Roedel
2017-08-24 19:06 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox