From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>,
Ohad Ben-Cohen <ohad@wizery.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Arun Kumar Neelakantam <aneela@codeaurora.org>,
Chris Lew <clew@codeaurora.org>,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: [PATCH v3 0/5] In-kernel QMI helpers and sysmon
Date: Wed, 15 Nov 2017 12:10:07 -0800 [thread overview]
Message-ID: <20171115201012.25892-1-bjorn.andersson@linaro.org> (raw)
This series introduces a helper library for drivers that needs to implement
clients or services in the kernel for communicating with QMI encoded messages.
This is used by a set of drivers in order to implement control signaling that
needs to happen between a driver and a service on a remote processor, such as
the synchronization of states during a remoteproc shutdown/restart; as seen in
the sysmon implementation.
Finally a sample driver provides an implementation of the "test" protocol,
which is a service typically implemented by Qualcomm remoteproc firmware.
Changes since v2:
- Fix reported typos
- Checkpatch fixes
- Use non-gpl EXPORT_SYMBOL
Changes since v1:
- Lot of modifications to QMI interface, from feedback and implementation and
testing of sysmon.
- Added sysmon driver.
- Added patch for remoteproc to pass gracefulness on subdev remove.
- QRTR patches part of v1 was merged separately
Bjorn Andersson (5):
soc: qcom: Introduce QMI encoder/decoder
soc: qcom: Introduce QMI helpers
remoteproc: Pass type of shutdown to subdev remove
remoteproc: qcom: Introduce sysmon
samples: Introduce Qualcomm QMI sample client
drivers/remoteproc/Kconfig | 17 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/qcom_adsp_pil.c | 12 +
drivers/remoteproc/qcom_common.c | 6 +-
drivers/remoteproc/qcom_common.h | 21 +
drivers/remoteproc/qcom_q6v5_pil.c | 3 +
drivers/remoteproc/qcom_sysmon.c | 585 ++++++++++++++++++++++++
drivers/remoteproc/qcom_wcnss.c | 4 +
drivers/remoteproc/remoteproc_core.c | 18 +-
drivers/soc/qcom/Kconfig | 9 +
drivers/soc/qcom/Makefile | 3 +
drivers/soc/qcom/qmi_encdec.c | 821 +++++++++++++++++++++++++++++++++
drivers/soc/qcom/qmi_interface.c | 849 +++++++++++++++++++++++++++++++++++
include/linux/remoteproc.h | 4 +-
include/linux/soc/qcom/qmi.h | 272 +++++++++++
samples/Kconfig | 9 +
samples/Makefile | 2 +-
samples/qmi/Makefile | 1 +
samples/qmi/qmi_sample_client.c | 631 ++++++++++++++++++++++++++
19 files changed, 3253 insertions(+), 15 deletions(-)
create mode 100644 drivers/remoteproc/qcom_sysmon.c
create mode 100644 drivers/soc/qcom/qmi_encdec.c
create mode 100644 drivers/soc/qcom/qmi_interface.c
create mode 100644 include/linux/soc/qcom/qmi.h
create mode 100644 samples/qmi/Makefile
create mode 100644 samples/qmi/qmi_sample_client.c
--
2.15.0
next reply other threads:[~2017-11-15 20:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-15 20:10 Bjorn Andersson [this message]
2017-11-15 20:10 ` [PATCH v3 1/5] soc: qcom: Introduce QMI encoder/decoder Bjorn Andersson
2017-11-16 5:42 ` Bjorn Andersson
2017-11-16 18:57 ` Chris Lew
2017-11-16 12:10 ` Srinivas Kandagatla
2017-11-17 6:10 ` Bjorn Andersson
2017-11-15 20:10 ` [PATCH v3 2/5] soc: qcom: Introduce QMI helpers Bjorn Andersson
2017-11-16 12:11 ` Srinivas Kandagatla
2017-11-17 6:30 ` Bjorn Andersson
2017-11-18 2:11 ` Chris Lew
2017-11-21 22:42 ` Bjorn Andersson
2017-11-15 20:10 ` [PATCH v3 3/5] remoteproc: Pass type of shutdown to subdev remove Bjorn Andersson
2017-11-15 20:10 ` [PATCH v3 4/5] remoteproc: qcom: Introduce sysmon Bjorn Andersson
2017-11-16 20:05 ` Chris Lew
2017-11-17 5:58 ` Bjorn Andersson
2017-11-18 1:27 ` Chris Lew
2017-11-15 20:10 ` [PATCH v3 5/5] samples: Introduce Qualcomm QMI sample client Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171115201012.25892-1-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=aneela@codeaurora.org \
--cc=clew@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=ohad@wizery.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox