From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: From: Jeffrey Hugo Subject: [PATCH 1/2] dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998 Date: Thu, 31 Oct 2019 19:44:35 -0700 Message-Id: <20191101024435.21975-1-jeffrey.l.hugo@gmail.com> In-Reply-To: <20191101024301.21919-1-jeffrey.l.hugo@gmail.com> References: <20191101024301.21919-1-jeffrey.l.hugo@gmail.com> To: agross@kernel.org, ohad@wizery.com, bjorn.andersson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Jeffrey Hugo List-ID: Add new compatible string for Qualcomm MSM8998 SoCs. Signed-off-by: Jeffrey Hugo --- Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 41ca5df5be5a..c416746f93cf 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -12,6 +12,7 @@ on the Qualcomm Hexagon core. "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" + "qcom,msm8998-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -41,6 +42,7 @@ on the Qualcomm Hexagon core. qcom,msm8974-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,msm8996-mss-pil: + qcom,msm8998-mss-pil: qcom,sdm845-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -70,6 +72,9 @@ on the Qualcomm Hexagon core. qcom,msm8996-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "pnoc", "qdss" + qcom,msm8998-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "qdss" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -137,6 +142,7 @@ For the compatible string below the following supplies are required: qcom,msm8974-mss-pil: no power-domain names required qcom,msm8996-mss-pil: + qcom,msm8998-mss-pil: must be "cx", "mx" qcom,sdm845-mss-pil: must be "cx", "mx", "mss", "load_state" -- 2.17.1