From: Daniel Kestrel <kestrelseventyfour@gmail.com>
To: kestrelseventyfour@gmail.com
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 2/3] dt-bindings: remoteproc: Add AVM WASP
Date: Thu, 4 Aug 2022 23:08:05 +0200 [thread overview]
Message-ID: <20220804210806.4053-3-kestrelseventyfour@gmail.com> (raw)
In-Reply-To: <20220804210806.4053-1-kestrelseventyfour@gmail.com>
AVM Fritzbox router boards may contain an additional ATH79
based SoC that has the wifi cards connected.
This patch adds bindings for this remote processor.
Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
---
.../bindings/remoteproc/avm,wasp-rproc.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
new file mode 100644
index 000000000000..2fd4ffb53945
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AVM WASP processor controller bindings
+
+maintainers:
+ - Daniel Kestrel <kestrelseventyfour@gmail.com>
+
+description: |
+ This document defines the bindings for the remoteproc component that loads and
+ boots firmwares on the AVM Wireless Assistant Support Processor (WASP) SoC
+ that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
+
+properties:
+ compatible:
+ enum:
+ - avm,fritzbox3390-wasp
+ - avm,fritzbox3490-wasp
+ - avm,fritzbox5490-wasp
+ - avm,fritzbox5491-wasp
+ - avm,fritzbox7490-wasp
+
+ mdio-device:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Lantiq GSWIP switch mdio.
+
+ link-interface:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Network interface, where the WASP SoC is connected to.
+
+ reset-gpios:
+ description: Gpio to reset the WASP SoC to initial state.
+ maxItems: 1
+
+ power-gpios:
+ description: Gpio to power the WASP SoC on and off.
+ maxItems: 1
+
+required:
+ - compatible
+ - mdio-device
+ - link-interface
+ - reset-gpios
+ - power-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ remoteproc {
+ compatible = "avm,fritzbox7490-wasp";
+ mdio-device = <&gswip_mdio>;
+ link-interface = <&port5>;
+ reset-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
--
2.17.1
next prev parent reply other threads:[~2022-08-04 21:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-04 21:08 [PATCH v5 0/3] Add support for WASP SoC on AVM router boards Daniel Kestrel
2022-08-04 21:08 ` [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add AVM Daniel Kestrel
2022-08-04 21:08 ` Daniel Kestrel [this message]
2022-08-09 19:33 ` [PATCH v5 2/3] dt-bindings: remoteproc: Add AVM WASP Rob Herring
2022-08-04 21:08 ` [PATCH v5 3/3] remoteproc: Add AVM WASP driver Daniel Kestrel
2022-10-25 17:59 ` Mathieu Poirier
2022-10-26 17:54 ` Mathieu Poirier
2022-10-30 17:58 ` Tanmay Shah
2022-10-24 16:38 ` [PATCH v5 0/3] Add support for WASP SoC on AVM router boards Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220804210806.4053-3-kestrelseventyfour@gmail.com \
--to=kestrelseventyfour@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox