From: Ben Levinsky <ben.levinsky@amd.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>,
<linux-remoteproc@vger.kernel.org>
Cc: <Frank.Li@nxp.com>, <s.hauer@pengutronix.de>,
<kernel@pengutronix.de>, <festevam@gmail.com>,
<geert+renesas@glider.be>, <magnus.damm@gmail.com>,
<patrice.chotard@foss.st.com>, <mcoquelin.stm32@gmail.com>,
<alexandre.torgue@foss.st.com>, <arnaud.pouliquen@foss.st.com>,
<daniel.baluta@nxp.com>, <tanmay.shah@amd.com>,
<imx@lists.linux.dev>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-renesas-soc@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH v2 5/5] remoteproc: switch drivers to optional resource-table helper
Date: Thu, 14 May 2026 09:21:29 -0700 [thread overview]
Message-ID: <20260514162129.1504162-6-ben.levinsky@amd.com> (raw)
In-Reply-To: <20260514162129.1504162-1-ben.levinsky@amd.com>
Use the shared optional resource-table helper in the remoteproc
drivers that already treat a missing resource table as non-fatal:
xlnx_r5_remoteproc, rcar_rproc, stm32_rproc, imx_rproc, and
imx_dsp_rproc.
Keep thin local parse_fw() wrappers in each driver so the helper only
centralizes the return-value handling. That lets each platform retain
control over whether the missing-table case is logged and at what
severity, while other parsing failures continue to propagate to the
caller.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
---
drivers/remoteproc/imx_dsp_rproc.c | 24 ++++++++++-----
drivers/remoteproc/imx_rproc.c | 25 ++++++++-------
drivers/remoteproc/rcar_rproc.c | 25 ++++++++-------
drivers/remoteproc/stm32_rproc.c | 23 +++++++++-----
drivers/remoteproc/xlnx_r5_remoteproc.c | 41 +++++++++----------------
5 files changed, 73 insertions(+), 65 deletions(-)
diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 2d9f14fbef1d..2ff74f7938f6 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -954,14 +954,6 @@ static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc, const struct fir
return ret;
}
-static int imx_dsp_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
-{
- if (rproc_elf_load_rsc_table(rproc, fw))
- dev_warn(&rproc->dev, "no resource table found for this firmware\n");
-
- return 0;
-}
-
static int imx_dsp_rproc_load(struct rproc *rproc, const struct firmware *fw)
{
struct imx_dsp_rproc *priv = rproc->priv;
@@ -990,6 +982,22 @@ static int imx_dsp_rproc_load(struct rproc *rproc, const struct firmware *fw)
return 0;
}
+static int imx_dsp_rproc_parse_fw(struct rproc *rproc,
+ const struct firmware *fw)
+{
+ int ret;
+
+ ret = rproc_elf_load_rsc_table_optional(rproc, fw);
+ if (ret)
+ return ret;
+
+ if (!rproc->table_ptr)
+ dev_warn(&rproc->dev,
+ "no resource table found for this firmware\n");
+
+ return 0;
+}
+
static const struct rproc_ops imx_dsp_rproc_ops = {
.prepare = imx_dsp_rproc_prepare,
.unprepare = imx_dsp_rproc_unprepare,
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 6249815b54d8..58c63f97ebf7 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -680,17 +680,6 @@ static int imx_rproc_prepare(struct rproc *rproc)
return 0;
}
-static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
-{
- int ret;
-
- ret = rproc_elf_load_rsc_table(rproc, fw);
- if (ret)
- dev_info(&rproc->dev, "No resource table in elf\n");
-
- return 0;
-}
-
static void imx_rproc_kick(struct rproc *rproc, int vqid)
{
struct imx_rproc *priv = rproc->priv;
@@ -768,6 +757,20 @@ imx_rproc_elf_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *
return rproc_elf_find_loaded_rsc_table(rproc, fw);
}
+static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret;
+
+ ret = rproc_elf_load_rsc_table_optional(rproc, fw);
+ if (ret)
+ return ret;
+
+ if (!rproc->table_ptr)
+ dev_info(&rproc->dev, "No resource table in elf\n");
+
+ return 0;
+}
+
static const struct rproc_ops imx_rproc_ops = {
.prepare = imx_rproc_prepare,
.attach = imx_rproc_attach,
diff --git a/drivers/remoteproc/rcar_rproc.c b/drivers/remoteproc/rcar_rproc.c
index e3121fadd292..b7a39014b6bb 100644
--- a/drivers/remoteproc/rcar_rproc.c
+++ b/drivers/remoteproc/rcar_rproc.c
@@ -55,17 +55,6 @@ static int rcar_rproc_prepare(struct rproc *rproc)
}
}
-static int rcar_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
-{
- int ret;
-
- ret = rproc_elf_load_rsc_table(rproc, fw);
- if (ret)
- dev_info(&rproc->dev, "No resource table in elf\n");
-
- return 0;
-}
-
static int rcar_rproc_start(struct rproc *rproc)
{
struct rcar_rproc *priv = rproc->priv;
@@ -99,6 +88,20 @@ static int rcar_rproc_stop(struct rproc *rproc)
return err;
}
+static int rcar_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret;
+
+ ret = rproc_elf_load_rsc_table_optional(rproc, fw);
+ if (ret)
+ return ret;
+
+ if (!rproc->table_ptr)
+ dev_info(&rproc->dev, "No resource table in elf\n");
+
+ return 0;
+}
+
static struct rproc_ops rcar_rproc_ops = {
.prepare = rcar_rproc_prepare,
.start = rcar_rproc_start,
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 7ac8265b60ac..a4d42b755c74 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -232,14 +232,6 @@ static int stm32_rproc_prepare(struct rproc *rproc)
}
}
-static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
-{
- if (rproc_elf_load_rsc_table(rproc, fw))
- dev_warn(&rproc->dev, "no resource table found for this firmware\n");
-
- return 0;
-}
-
static irqreturn_t stm32_rproc_wdg(int irq, void *data)
{
struct platform_device *pdev = data;
@@ -623,6 +615,21 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
return (__force struct resource_table *)ddata->rsc_va;
}
+static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret;
+
+ ret = rproc_elf_load_rsc_table_optional(rproc, fw);
+ if (ret)
+ return ret;
+
+ if (!rproc->table_ptr)
+ dev_warn(&rproc->dev,
+ "no resource table found for this firmware\n");
+
+ return 0;
+}
+
static const struct rproc_ops st_rproc_ops = {
.prepare = stm32_rproc_prepare,
.start = stm32_rproc_start,
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index e5d1903c9636..9b9f07d152e6 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -664,33 +664,6 @@ static int add_tcm_banks(struct rproc *rproc)
return ret;
}
-/*
- * zynqmp_r5_parse_fw()
- * @rproc: single R5 core's corresponding rproc instance
- * @fw: ptr to firmware to be loaded onto r5 core
- *
- * get resource table if available
- *
- * return 0 on success, otherwise non-zero value on failure
- */
-static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw)
-{
- int ret;
-
- ret = rproc_elf_load_rsc_table(rproc, fw);
- if (ret == -EINVAL) {
- /*
- * resource table only required for IPC.
- * if not present, this is not necessarily an error;
- * for example, loading r5 hello world application
- * so simply inform user and keep going.
- */
- dev_info(&rproc->dev, "no resource table found.\n");
- ret = 0;
- }
- return ret;
-}
-
/**
* zynqmp_r5_rproc_prepare() - prepare core to boot/attach
* adds carveouts for TCM bank and reserved memory regions
@@ -843,6 +816,20 @@ static int zynqmp_r5_detach(struct rproc *rproc)
return 0;
}
+static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret;
+
+ ret = rproc_elf_load_rsc_table_optional(rproc, fw);
+ if (ret)
+ return ret;
+
+ if (!rproc->table_ptr)
+ dev_info(&rproc->dev, "no resource table found.\n");
+
+ return 0;
+}
+
static const struct rproc_ops zynqmp_r5_rproc_ops = {
.prepare = zynqmp_r5_rproc_prepare,
.unprepare = zynqmp_r5_rproc_unprepare,
--
2.34.1
prev parent reply other threads:[~2026-05-14 16:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-14 16:21 [PATCH v2 0/5] remoteproc: cleanup shared carveout and resource-table helpers Ben Levinsky
2026-05-14 16:21 ` [PATCH v2 1/5] remoteproc: add common wc-ioremap carveout callbacks Ben Levinsky
2026-05-14 16:21 ` [PATCH v2 2/5] remoteproc: switch exact-match drivers to wc-ioremap callbacks Ben Levinsky
2026-05-14 16:21 ` [PATCH v2 3/5] remoteproc: mark wc-ioremap carveouts as iomem Ben Levinsky
2026-05-14 16:21 ` [PATCH v2 4/5] remoteproc: add helper for optional ELF resource tables Ben Levinsky
2026-05-14 16:21 ` Ben Levinsky [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260514162129.1504162-6-ben.levinsky@amd.com \
--to=ben.levinsky@amd.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=arnaud.pouliquen@foss.st.com \
--cc=daniel.baluta@nxp.com \
--cc=festevam@gmail.com \
--cc=geert+renesas@glider.be \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=magnus.damm@gmail.com \
--cc=mathieu.poirier@linaro.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=patrice.chotard@foss.st.com \
--cc=s.hauer@pengutronix.de \
--cc=tanmay.shah@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox