Re: [PATCH 1/4] dt-bindings: remoteproc: qcom: wcnss: Add WCN3680B compatible

[Luca Weiss <luca@z3ntu.xyz>]

On Montag, 27. November 2023 21:07:28 CET Stephan Gerhold wrote:
> On Sat, Nov 25, 2023 at 01:25:22PM +0100, Luca Weiss wrote:
> > On Montag, 16. Oktober 2023 16:44:28 CET Stephan Gerhold wrote:
> > > On Mon, Oct 16, 2023 at 03:16:14PM +0200, Loic Poulain wrote:
> > > > On Mon, 16 Oct 2023 at 07:35, Krzysztof Kozlowski
> > > > 
> > > > <krzysztof.kozlowski@linaro.org> wrote:
> > > > > On 15/10/2023 22:03, Luca Weiss wrote:
> > > > > > Add a compatible for the iris subnode in the WCNSS PIL.
> > > > > > 
> > > > > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > > > > > ---
> > > > > > 
> > > > > >  Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > > > > >  | 1
> > > > > >  +
> > > > > >  1 file changed, 1 insertion(+)
> > > > > > 
> > > > > > diff --git
> > > > > > a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > > > > > b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > > > > > index 45eb42bd3c2c..0e5e0b7a0610 100644
> > > > > > ---
> > > > > > a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yam
> > > > > > l
> > > > > > +++
> > > > > > b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yam
> > > > > > l
> > > > > > 
> > > > > > @@ -111,6 +111,7 @@ properties:
> > > > > >            - qcom,wcn3660
> > > > > >            - qcom,wcn3660b
> > > > > >            - qcom,wcn3680
> > > > > > 
> > > > > > +          - qcom,wcn3680b
> > > > > 
> > > > > Looks like this should be made as compatible with qcom,wcn3680 (so
> > > > > with
> > > > > fallback).
> > > > 
> > > > Yes, agree, let's do a regular fallback as there is nothing 'b'
> > > > specific in the driver:
> > > > `compatible = "qcom,wcn3680b", "qcom,wcn3680";`
> > > > 
> > > > And yes, we should also have done that for qcom,wcn3660b...
> > > 
> > > I don't think this would have worked properly for qcom,wcn3660b:
> > >  - It's not compatible with "qcom,wcn3660", because they have different
> > >  
> > >    regulator voltage requirements. wcn3660(a?) needs vddpa with
> > >    2.9-3.0V, but wcn3660b needs 3.3V. That's why wcn3660b uses the
> > >    wcn3680_data in qcom_wcnss.iris.c. Otherwise if you would run an
> > >    older kernel that knows "qcom,wcn3660" but not "qcom,wcn3660b" it
> > >    would apply the wrong voltage.
> > >  
> > >  - It's not compatible with "qcom,wcn3680" either because that is used
> > >  
> > >    as indication if 802.11ac is supported (wcn3660b doesn't).
> > > 
> > > The main question here is: What does the current "qcom,wcn3680"
> > > compatible actually represent? It's defined with vddpa = 3.3V in the
> > > 
> > > driver, which would suggest that:
> > >  1. It's actually meant to represent WCN3680B, which needs 3.3V vddpa
> > >  
> > >     like WCN3660B, or
> > >  
> > >  2. WCN3680(A?) has different requirements than WCN3660(A?) and also
> > >  
> > >     needs 3.3V vddpa. But then what is the difference between
> > >     WCN3680(A?) and WCN3680B? Is there even a variant without ...B?
> > > 
> > > There is public documentation for WCN3660B and WCN3680B but the non-B
> > > variants are shrouded in mystery.
> > 
> > Hi Stephan (and everyone),
> > 
> > Do you have a suggestion how to move this patchset forward? Is the
> > fallback
> > compatible that was suggested okay for the wcn3680b situation?
> > 
> >   compatible = "qcom,wcn3680b", "qcom,wcn3680";
> > 
> > If so, I'll make v2 with that implemented.
> 
> Personally, I would just go with what exists already and use the
> existing "qcom,wcn3680" compatible as-is. No one has provided evidence
> that there is actually something like a WCN3680(A), without a 'B' at the
> end. Also, all existing users of the "qcom,wcn3680" compatible upstream
> actually seem to refer to WCN3680B (I'm quite sure apq8039-t2 has
> WCN3680B, MSM8974 isn't entirely clear but iirc you mentioned there was
> some schematic of a MSM8974 device which says WCN3680B as well).
> 
> It would be nice to have the compatible perfectly correct and complete,
> but I see no point to extend it with additional information that we
> can't properly verify.
> 
> Or do you actually need a different compatible to customize something in
> the driver?

No it should be fine with qcom,wcn3680.

I'll send v2 in the coming days then, thanks for your input!

Regards
Luca

> 
> Thanks,
> Stephan