From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] ARM: dts: r8a7792: add GPIO support
Date: Wed, 06 Jul 2016 01:02:20 +0300 [thread overview]
Message-ID: <11674399.J5QsPL1iTr@wasted.cogentembedded.com> (raw)
In-Reply-To: <19087307.ZHtRY0pPL5@wasted.cogentembedded.com>
Describe all 12 GPIO controllers in the R8A7792 device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/r8a7792.dtsi | 168 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -113,6 +113,174 @@
reg = <0 0xe6060000 0 0x144>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio6: gpio@e6055100 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055100 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio7: gpio@e6055200 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055200 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio8: gpio@e6055300 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055300 0 0x50>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 256 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio9: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 288 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio10: gpio@e6055500 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055500 0 0x50>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 320 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio11: gpio@e6055600 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055600 0 0x50>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 352 30>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
next prev parent reply other threads:[~2016-07-05 22:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 21:59 [PATCH v2 0/2] Add R8A7792 GPIO support Sergei Shtylyov
2016-07-05 22:01 ` [PATCH v2 1/2] ARM: dts: r8a7792: add GPIO clocks Sergei Shtylyov
2016-07-05 22:02 ` Sergei Shtylyov [this message]
2016-07-18 2:09 ` [PATCH v2 0/2] Add R8A7792 GPIO support Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11674399.J5QsPL1iTr@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox