From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 1/3] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Date: Thu, 11 May 2017 13:58:52 +0200 [thread overview]
Message-ID: <1494503934-23367-2-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1494503934-23367-1-git-send-email-geert+renesas@glider.be>
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, add adds/removes/overrides device nodes and properties
where needed.
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
While currently r8a7795-es1.dtsi only adds device nodes, removal of
devices nodes and properties can be implemented using the /delete-node/
and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
v3:
- Rebase on top of common Salvator-X board support extraction,
- Remove the "compatible" property from the DU node in r8a7795.dtsi,
in addition to the "vsps" property,
v2:
- Use a separate file for ES1.x instead of for ES2.0, so r8a7795.dtsi
always corresponds to the latest SoC revision,
- Add a dash between SoC part number and revision, for compatibility
with the BSP,
- Enhance the hardware description from basic support to everything
already supported on ES1.x (except for DU due VSP),
- Let r8a7795-es1.dtsi include r8a7795.dtsi.
---
arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 84 ++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +-
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 4 +-
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 71 +-----------------
4 files changed, 89 insertions(+), 74 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
new file mode 100644
index 0000000000000000..a0ba7bd21ea3aa18
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -0,0 +1,84 @@
+/*
+ * Device Tree Source for the r8a7795 ES1.x SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "r8a7795.dtsi"
+
+&soc {
+ xhci1: usb@ee0400000 {
+ compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+ reg = <0 0xee040000 0 0xc00>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 327>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
+ status = "disabled";
+ };
+
+ fcpf2: fcp@fe952000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe952000 0 0x200>;
+ clocks = <&cpg CPG_MOD 613>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 613>;
+ };
+
+ vspi2: vsp@fe9c0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9c0000 0 0x8000>;
+ interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 629>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 629>;
+
+ renesas,fcp = <&fcpvi2>;
+ };
+
+ fcpvi2: fcp@fe9cf000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9cf000 0 0x200>;
+ clocks = <&cpg CPG_MOD 609>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 609>;
+ };
+
+ vspd3: vsp@fea38000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea38000 0 0x4000>;
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 620>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
+
+ renesas,fcp = <&fcpvd3>;
+ };
+
+ fcpvd3: fcp@fea3f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea3f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 600>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 600>;
+ };
+
+ fdp1@fe948000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe948000 0 0x2400>;
+ interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 117>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 117>;
+ renesas,fcp = <&fcpf2>;
+ };
+};
+
+&du {
+ compatible = "renesas,du-r8a7795";
+ vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index a1fbf0ab8ad8e425..95fe207cb6a3fd2f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,11 +12,11 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a7795-es1.dtsi"
#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795";
+ model = "Renesas H3ULCB board based on r8a7795 ES1.x";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 52fce67df3413f1f..be5b2e966ea1700e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -11,11 +11,11 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a7795-es1.dtsi"
#include "salvator-x.dtsi"
/ {
- model = "Renesas Salvator-X board based on r8a7795";
+ model = "Renesas Salvator-X board based on r8a7795 ES1.x";
compatible = "renesas,salvator-x", "renesas,r8a7795";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 7d87dff70ac84c40..e2c447cc12fe7f3a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -182,7 +182,7 @@
clock-frequency = <0>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -1274,16 +1274,6 @@
status = "disabled";
};
- xhci1: usb@ee0400000 {
- compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
- reg = <0 0xee040000 0 0xc00>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 327>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 327>;
- status = "disabled";
- };
-
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
@@ -1568,14 +1558,6 @@
resets = <&cpg 614>;
};
- fcpf2: fcp@fe952000 {
- compatible = "renesas,fcpf";
- reg = <0 0xfe952000 0 0x200>;
- clocks = <&cpg CPG_MOD 613>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 613>;
- };
-
vspbd: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
@@ -1633,25 +1615,6 @@
resets = <&cpg 610>;
};
- vspi2: vsp@fe9c0000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfe9c0000 0 0x8000>;
- interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 629>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 629>;
-
- renesas,fcp = <&fcpvi2>;
- };
-
- fcpvi2: fcp@fe9cf000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfe9cf000 0 0x200>;
- clocks = <&cpg CPG_MOD 609>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 609>;
- };
-
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x4000>;
@@ -1709,25 +1672,6 @@
resets = <&cpg 601>;
};
- vspd3: vsp@fea38000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfea38000 0 0x4000>;
- interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 620>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 620>;
-
- renesas,fcp = <&fcpvd3>;
- };
-
- fcpvd3: fcp@fea3f000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfea3f000 0 0x200>;
- clocks = <&cpg CPG_MOD 600>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 600>;
- };
-
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
@@ -1748,18 +1692,7 @@
renesas,fcp = <&fcpf1>;
};
- fdp1@fe948000 {
- compatible = "renesas,fdp1";
- reg = <0 0xfe948000 0 0x2400>;
- interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 117>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 117>;
- renesas,fcp = <&fcpf2>;
- };
-
du: display@feb00000 {
- compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
@@ -1775,8 +1708,6 @@
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
status = "disabled";
- vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
next prev parent reply other threads:[~2017-05-11 11:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-11 11:58 [PATCH v3 0/3] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0 Geert Uytterhoeven
2017-05-11 11:58 ` Geert Uytterhoeven [this message]
2017-05-11 14:53 ` [PATCH v3 1/3] " Simon Horman
2017-05-11 15:42 ` Geert Uytterhoeven
2017-05-12 7:32 ` Simon Horman
2017-05-12 9:49 ` Geert Uytterhoeven
2017-05-15 5:37 ` Simon Horman
2017-05-11 11:58 ` [PATCH v3 2/3] arm64: dts: r8a7795: salvator-x: " Geert Uytterhoeven
2017-05-11 14:53 ` Simon Horman
2017-05-11 15:18 ` Geert Uytterhoeven
2017-05-12 7:29 ` Simon Horman
2017-05-11 11:58 ` [PATCH v3 3/3] arm64: dts: r8a7795: h3ulcb: " Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494503934-23367-2-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=sjoerd.simons@collabora.co.uk \
--cc=wsa+renesas@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).