linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Magnus Damm <damm+renesas@opensource.se>,
	linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
	Takeshi Kihara <takeshi.kihara.df@renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] pinctrl: sh-pfc: r8a77965: Add support for INTC-EX IRQ pins
Date: Mon, 26 Feb 2018 16:30:11 +0100	[thread overview]
Message-ID: <1519659011-24265-1-git-send-email-geert+renesas@glider.be> (raw)

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

Most pins on the R8A77965 SoC can be configured in GPIO mode for
interrupt and GPIO functionality, while a couple of them can also
be routed to the INTC-EX hardware block (formerly known as IRQC).

On R8A77965 the INTC-EX hardware handles pins IRQ0 -> IRQ5 and
this patch adds support for them to the PFC driver as "intc_ex_irqN".

Based on a similar patch for the R8A7795 PFC driver by Magnus Damm
<damm+renesas@opensource.se>.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in sh-pfc-for-v4.17.

 drivers/pinctrl/sh-pfc/pfc-r8a77965.c | 61 +++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c b/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
index acd57d5b2fb18b25..363ccc3b1bdc7a88 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
@@ -1661,6 +1661,51 @@ static const unsigned int avb_avtp_capture_b_pins[] = {
 static const unsigned int avb_avtp_capture_b_mux[] = {
 	AVB_AVTP_CAPTURE_B_MARK,
 };
+
+/* - INTC-EX ---------------------------------------------------------------- */
+static const unsigned int intc_ex_irq0_pins[] = {
+	/* IRQ0 */
+	RCAR_GP_PIN(2, 0),
+};
+static const unsigned int intc_ex_irq0_mux[] = {
+	IRQ0_MARK,
+};
+static const unsigned int intc_ex_irq1_pins[] = {
+	/* IRQ1 */
+	RCAR_GP_PIN(2, 1),
+};
+static const unsigned int intc_ex_irq1_mux[] = {
+	IRQ1_MARK,
+};
+static const unsigned int intc_ex_irq2_pins[] = {
+	/* IRQ2 */
+	RCAR_GP_PIN(2, 2),
+};
+static const unsigned int intc_ex_irq2_mux[] = {
+	IRQ2_MARK,
+};
+static const unsigned int intc_ex_irq3_pins[] = {
+	/* IRQ3 */
+	RCAR_GP_PIN(2, 3),
+};
+static const unsigned int intc_ex_irq3_mux[] = {
+	IRQ3_MARK,
+};
+static const unsigned int intc_ex_irq4_pins[] = {
+	/* IRQ4 */
+	RCAR_GP_PIN(2, 4),
+};
+static const unsigned int intc_ex_irq4_mux[] = {
+	IRQ4_MARK,
+};
+static const unsigned int intc_ex_irq5_pins[] = {
+	/* IRQ5 */
+	RCAR_GP_PIN(2, 5),
+};
+static const unsigned int intc_ex_irq5_mux[] = {
+	IRQ5_MARK,
+};
+
 /* - SCIF0 ------------------------------------------------------------------ */
 static const unsigned int scif0_data_pins[] = {
 	/* RX, TX */
@@ -1883,6 +1928,12 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
 	SH_PFC_PIN_GROUP(avb_avtp_capture_a),
 	SH_PFC_PIN_GROUP(avb_avtp_match_b),
 	SH_PFC_PIN_GROUP(avb_avtp_capture_b),
+	SH_PFC_PIN_GROUP(intc_ex_irq0),
+	SH_PFC_PIN_GROUP(intc_ex_irq1),
+	SH_PFC_PIN_GROUP(intc_ex_irq2),
+	SH_PFC_PIN_GROUP(intc_ex_irq3),
+	SH_PFC_PIN_GROUP(intc_ex_irq4),
+	SH_PFC_PIN_GROUP(intc_ex_irq5),
 	SH_PFC_PIN_GROUP(scif0_data),
 	SH_PFC_PIN_GROUP(scif0_clk),
 	SH_PFC_PIN_GROUP(scif0_ctrl),
@@ -1927,6 +1978,15 @@ static const char * const avb_groups[] = {
 	"avb_avtp_capture_b",
 };
 
+static const char * const intc_ex_groups[] = {
+	"intc_ex_irq0",
+	"intc_ex_irq1",
+	"intc_ex_irq2",
+	"intc_ex_irq3",
+	"intc_ex_irq4",
+	"intc_ex_irq5",
+};
+
 static const char * const scif0_groups[] = {
 	"scif0_data",
 	"scif0_clk",
@@ -1978,6 +2038,7 @@ static const char * const scif_clk_groups[] = {
 
 static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(avb),
+	SH_PFC_FUNCTION(intc_ex),
 	SH_PFC_FUNCTION(scif0),
 	SH_PFC_FUNCTION(scif1),
 	SH_PFC_FUNCTION(scif2),
-- 
2.7.4

                 reply	other threads:[~2018-02-26 15:30 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519659011-24265-1-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=damm+renesas@opensource.se \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=takeshi.kihara.df@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).