From: Magnus Damm <magnus.damm@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH/RFC 01/06] Prototype code for IMP-X5
Date: Mon, 21 Jan 2019 21:16:52 +0900 [thread overview]
Message-ID: <154807301237.2406.6258610622802083286.sendpatchset@octo> (raw)
In-Reply-To: <154807300302.2406.14245640502137089757.sendpatchset@octo>
From: Magnus Damm <damm+renesas@opensource.se>
Prototype code to read out the IMP-X5 register settings at probe() time.
Not for upstream merge.
Not-Yet-Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
drivers/soc/renesas/Makefile | 2
drivers/soc/renesas/renesas-test-imp-x5.c | 77 +++++++++++++++++++++++++++++
2 files changed, 78 insertions(+), 1 deletion(-)
--- 0001/drivers/soc/renesas/Makefile
+++ work/drivers/soc/renesas/Makefile 2019-01-21 19:52:18.929754637 +0900
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Generic, must be first because of soc_device_register()
-obj-$(CONFIG_SOC_RENESAS) += renesas-soc.o
+obj-$(CONFIG_SOC_RENESAS) += renesas-soc.o renesas-test-imp-x5.o
# SoC
obj-$(CONFIG_SYSC_R8A7743) += r8a7743-sysc.o
--- /dev/null
+++ work/drivers/soc/renesas/renesas-test-imp-x5.c 2019-01-21 20:21:30.895607391 +0900
@@ -0,0 +1,77 @@
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+static const struct of_device_id imp_x5_of_match[] = {
+ { .compatible = "renesas,imp-x5" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imp_x5_of_match);
+
+static void imp_x5_dump_line(unsigned long addr, void __iomem *base, int offs)
+{
+ unsigned int buf[4];
+ char pfx[16];
+ int i;
+
+ for (i = 0; i < 4; i++)
+ buf[i] = ioread32(base + offs + i);
+
+ snprintf(pfx, sizeof(pfx), "0x%08lx: ", addr + offs);
+
+ print_hex_dump(KERN_DEBUG, pfx, 0, 16, 1, &buf[0], 16, true);
+}
+
+static void imp_x5_dump(unsigned long addr, void __iomem *base, int length)
+{
+ int i;
+
+ for (i = 0; i < length; i += 16)
+ imp_x5_dump_line(addr, base, i);
+}
+
+static int imp_x5_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ void __iomem *base;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base)) {
+ dev_warn(dev, "unable to map imp-x5 registers\n");
+ return PTR_ERR(base);
+ }
+
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+
+ printk("IMP-X5 test: dumping registers\n");
+
+ for (i = 0; i < resource_size(res) && i < 0x300000; i += 0x100000)
+ imp_x5_dump(res->start + i, base + i, 64);
+
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+ return -ENODEV;
+}
+
+static struct platform_driver imp_x5_driver = {
+ .driver = {
+ .name = "renesas-imp-x5",
+ .of_match_table = of_match_ptr(imp_x5_of_match),
+ },
+ .probe = imp_x5_probe,
+};
+
+module_platform_driver(imp_x5_driver);
+
+MODULE_DESCRIPTION("Renesas IMP-X5 test driver");
+MODULE_LICENSE("GPL v2");
next prev parent reply other threads:[~2019-01-21 12:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 12:16 [PATCH/RFC 00/06] R-Car Gen3 IMP-X5 prototype code Magnus Damm
2019-01-21 12:16 ` Magnus Damm [this message]
2019-01-21 12:17 ` [PATCH/RFC 02/06] arm64: dts: renesas: r8a7795: One IMP-X5 device for R-Car H3 Magnus Damm
2019-01-21 12:17 ` [PATCH/RFC 03/06] arm64: dts: renesas: r8a7796: One IMP-X5 device for R-Car M3-W Magnus Damm
2019-01-21 12:17 ` [PATCH/RFC 04/06] arm64: dts: renesas: r8a77965: One IMP-X5 device for R-Car M3-N Magnus Damm
2019-01-21 12:17 ` [PATCH/RFC 05/06] arm64: dts: renesas: r8a77970: One IMP-X5 device for R-Car V3M Magnus Damm
2019-01-21 12:17 ` [PATCH/RFC 06/06] arm64: dts: renesas: r8a77980: One IMP-X5 device for R-Car V3H Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=154807301237.2406.6258610622802083286.sendpatchset@octo \
--to=magnus.damm@gmail.com \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox