Re: The failure summary report of GEN2 for linux stable v4.10-rc2

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Dear Dong,

On Tuesday 17 Jan 2017 15:05:32 DongCV wrote:
> Dear Mr Laurent
> 
> Thank you for your quick reply.
> I've retested the HDMI output on Lager(H2) with v4.10-rc2.
> 
> The results:
> 
> Enabled CMA:
> 
> The HDMI cable unplugged: Could not recognize the display.
> The HDMI cable plugged: Recognized the display-> test fail.
> 
> The VGA cable unplugged: Recognized the display-> test fail.
> The VGA cable plugged: Recognized the display-> test fail.
> 
> 
> Disabled CMA: The same to the case of enabled CMA.
> 
> I attach the test procedures and test tool, test result.
> Please have a look at it.

I'm afraid there was a bit of misunderstanding. I was referring to the "Lager: 
Bad image quality when shown on HDMI display" issue, not the "DISPLAY-UNIT:  
Does not support 640x480 resolution" and "DISPLAY-UNIT: Does not support 16-
bit for color numbers" issues. I should have been more precise, I'm very sorry 
about that.

Could you please share your detailed test procedure, kernel configuration and 
test binaries for the "Lager: Bad image quality when shown on HDMI display" 
issue ?

-- 
Regards,

Laurent Pinchart