From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from relmlor3.renesas.com ([210.160.252.173]:26827 "EHLO relmlie2.idc.renesas.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S933163AbcILOQB (ORCPT ); Mon, 12 Sep 2016 10:16:01 -0400 From: Chris Brandt To: Ulf Hansson , Wolfram Sang , Sergei Shtylyov , Geert Uytterhoeven Cc: Simon Horman , linux-mmc@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris Brandt Subject: [PATCH v3 0/3] mmc: sh_mobile_sdhi: Add r7s72100 support Date: Mon, 12 Sep 2016 10:15:04 -0400 Message-Id: <20160912141507.6837-1-chris.brandt@renesas.com> Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: For the most part, the SDHI controller in the RZ/A1 (r7s72100) is the same as other Renesas SoC...except for the fact that the data port register was widened to 32-bits and the 16-bit accesses in the current tmio driver aren't going to cut it. Also, the tmio driver allows you to pass in what voltages you support via the ocr_mask. For the RZ/A1, it's just simple 3.3v. So, I added the ability to pass that when using DT. Chris Brandt (3): mmc: sh_mobile_sdhi: add ocr_mask option mmc: tmio-mmc: add support for 32bit data port mmc: sh_mobile_sdhi: Add r7s72100 support Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 1 + drivers/mmc/host/sh_mobile_sdhi.c | 9 +++++++ drivers/mmc/host/tmio_mmc.h | 12 +++++++++ drivers/mmc/host/tmio_mmc_pio.c | 30 ++++++++++++++++++++++ include/linux/mfd/tmio.h | 5 ++++ 5 files changed, 57 insertions(+) -- 2.9.2