From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: linux-renesas-soc@vger.kernel.org, geert@linux-m68k.org
Cc: horms@verge.net.au, magnus.damm@gmail.com, wsa@the-dreams.de,
Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Subject: [PATCH 5/6] arm64: renesas: r8a7796: Enable I2C DMA
Date: Wed, 14 Sep 2016 18:46:10 +0200 [thread overview]
Message-ID: <20160914164611.31237-6-ulrich.hecht+renesas@gmail.com> (raw)
In-Reply-To: <20160914164611.31237-1-ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index a4d8b76..7c4d11c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -257,6 +257,8 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -269,6 +271,8 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -281,6 +285,8 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -293,6 +299,8 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -305,6 +313,8 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -317,6 +327,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -329,6 +341,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
--
2.9.3
next prev parent reply other threads:[~2016-09-14 16:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-14 16:46 [PATCH 0/6] r8a7796 I2C integration Ulrich Hecht
2016-09-14 16:46 ` [PATCH 1/6] i2c: rcar: add support for r8a7796 (R-Car M3-W) Ulrich Hecht
2016-09-15 11:33 ` Geert Uytterhoeven
2016-09-16 17:47 ` Wolfram Sang
2016-09-14 16:46 ` [PATCH 2/6] clk: renesas: r8a7796: Add I2C clocks Ulrich Hecht
2016-09-15 11:35 ` Geert Uytterhoeven
2016-09-14 16:46 ` [PATCH 3/6] pinctrl: sh-pfc: r8a7796: add I2C pin support Ulrich Hecht
2016-09-15 11:39 ` Geert Uytterhoeven
2016-09-14 16:46 ` [PATCH 4/6] arm64: renesas: r8a7796: add I2C support Ulrich Hecht
2016-09-15 11:42 ` Geert Uytterhoeven
2016-09-16 9:48 ` Simon Horman
2016-09-16 17:52 ` Wolfram Sang
2016-09-14 16:46 ` Ulrich Hecht [this message]
2016-09-15 11:47 ` [PATCH 5/6] arm64: renesas: r8a7796: Enable I2C DMA Geert Uytterhoeven
2016-09-14 16:46 ` [PATCH 6/6] arm64: renesas: r8a7796: salvator-x: enable I2C Ulrich Hecht
2016-09-15 11:49 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160914164611.31237-6-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).