From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
Sasha Levin <sashal@kernel.org>,
linus.walleij@linaro.org, linux-renesas-soc@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 6.10 068/121] pinctrl: renesas: rzg2l: Validate power registers for SD and ETH
Date: Wed, 31 Jul 2024 20:00:06 -0400 [thread overview]
Message-ID: <20240801000834.3930818-68-sashal@kernel.org> (raw)
In-Reply-To: <20240801000834.3930818-1-sashal@kernel.org>
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
[ Upstream commit a3a632ed87f0913779092c30bd0ea7dfd81601f3 ]
On RZ/V2H(P) SoC, the power registers for SD and ETH do not exist,
resulting in invalid register offsets. Ensure that the register offsets
are valid before any read/write operations are performed. If the power
registers are not available, both SD and ETH will be set to '0'.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 60be78da9f529..389602e4d7ab3 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -2583,8 +2583,10 @@ static int rzg2l_pinctrl_suspend_noirq(struct device *dev)
rzg2l_pinctrl_pm_setup_dedicated_regs(pctrl, true);
for (u8 i = 0; i < 2; i++) {
- cache->sd_ch[i] = readb(pctrl->base + SD_CH(regs->sd_ch, i));
- cache->eth_poc[i] = readb(pctrl->base + ETH_POC(regs->eth_poc, i));
+ if (regs->sd_ch)
+ cache->sd_ch[i] = readb(pctrl->base + SD_CH(regs->sd_ch, i));
+ if (regs->eth_poc)
+ cache->eth_poc[i] = readb(pctrl->base + ETH_POC(regs->eth_poc, i));
}
cache->qspi = readb(pctrl->base + QSPI);
@@ -2615,8 +2617,10 @@ static int rzg2l_pinctrl_resume_noirq(struct device *dev)
writeb(cache->qspi, pctrl->base + QSPI);
writeb(cache->eth_mode, pctrl->base + ETH_MODE);
for (u8 i = 0; i < 2; i++) {
- writeb(cache->sd_ch[i], pctrl->base + SD_CH(regs->sd_ch, i));
- writeb(cache->eth_poc[i], pctrl->base + ETH_POC(regs->eth_poc, i));
+ if (regs->sd_ch)
+ writeb(cache->sd_ch[i], pctrl->base + SD_CH(regs->sd_ch, i));
+ if (regs->eth_poc)
+ writeb(cache->eth_poc[i], pctrl->base + ETH_POC(regs->eth_poc, i));
}
rzg2l_pinctrl_pm_setup_pfc(pctrl);
--
2.43.0
parent reply other threads:[~2024-08-01 0:15 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20240801000834.3930818-1-sashal@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240801000834.3930818-68-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox