From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Hans Verkuil <hverkuil@xs4all.nl>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 5/7] media: rcar-isp: Move driver to own directory
Date: Tue, 22 Apr 2025 01:42:55 +0300 [thread overview]
Message-ID: <20250421224255.GA17813@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250421111240.789510-6-niklas.soderlund+renesas@ragnatech.se>
Hi Niklas,
Thank you for the patch.
On Mon, Apr 21, 2025 at 01:12:38PM +0200, Niklas Söderlund wrote:
> Before extending the driver with functions from the R-Car ISP core that
> will span multiple files move the existing driver to a separate
> directory. While at it rename the single source file to allow future
> files to be grouped by functions.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> ---
> MAINTAINERS | 2 +-
> drivers/media/platform/renesas/Kconfig | 18 +-----------------
> drivers/media/platform/renesas/Makefile | 2 +-
> .../media/platform/renesas/rcar-isp/Kconfig | 17 +++++++++++++++++
> .../media/platform/renesas/rcar-isp/Makefile | 4 ++++
> .../renesas/{rcar-isp.c => rcar-isp/csisp.c} | 0
> 6 files changed, 24 insertions(+), 19 deletions(-)
> create mode 100644 drivers/media/platform/renesas/rcar-isp/Kconfig
> create mode 100644 drivers/media/platform/renesas/rcar-isp/Makefile
> rename drivers/media/platform/renesas/{rcar-isp.c => rcar-isp/csisp.c} (100%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 465569a7b264..4904d0896773 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14917,7 +14917,7 @@ F: Documentation/devicetree/bindings/media/renesas,csi2.yaml
> F: Documentation/devicetree/bindings/media/renesas,isp.yaml
> F: Documentation/devicetree/bindings/media/renesas,vin.yaml
> F: drivers/media/platform/renesas/rcar-csi2.c
> -F: drivers/media/platform/renesas/rcar-isp.c
> +F: drivers/media/platform/renesas/rcar-isp/
> F: drivers/media/platform/renesas/rcar-vin/
>
> MEDIA DRIVERS FOR RENESAS - VSP1
> diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
> index c7fc718a30a5..27a54fa79083 100644
> --- a/drivers/media/platform/renesas/Kconfig
> +++ b/drivers/media/platform/renesas/Kconfig
> @@ -30,23 +30,6 @@ config VIDEO_RCAR_CSI2
> To compile this driver as a module, choose M here: the
> module will be called rcar-csi2.
>
> -config VIDEO_RCAR_ISP
> - tristate "R-Car Image Signal Processor (ISP)"
> - depends on V4L_PLATFORM_DRIVERS
> - depends on VIDEO_DEV && OF
> - depends on ARCH_RENESAS || COMPILE_TEST
> - select MEDIA_CONTROLLER
> - select VIDEO_V4L2_SUBDEV_API
> - select RESET_CONTROLLER
> - select V4L2_FWNODE
> - help
> - Support for Renesas R-Car Image Signal Processor (ISP).
> - Enable this to support the Renesas R-Car Image Signal
> - Processor (ISP).
> -
> - To compile this driver as a module, choose M here: the
> - module will be called rcar-isp.
> -
> config VIDEO_SH_VOU
> tristate "SuperH VOU video output driver"
> depends on V4L_PLATFORM_DRIVERS
> @@ -56,6 +39,7 @@ config VIDEO_SH_VOU
> help
> Support for the Video Output Unit (VOU) on SuperH SoCs.
>
> +source "drivers/media/platform/renesas/rcar-isp/Kconfig"
> source "drivers/media/platform/renesas/rcar-vin/Kconfig"
> source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
>
> diff --git a/drivers/media/platform/renesas/Makefile b/drivers/media/platform/renesas/Makefile
> index 50774a20330c..1127259c09d6 100644
> --- a/drivers/media/platform/renesas/Makefile
> +++ b/drivers/media/platform/renesas/Makefile
> @@ -3,13 +3,13 @@
> # Makefile for the Renesas capture/playback device drivers.
> #
>
> +obj-y += rcar-isp/
> obj-y += rcar-vin/
> obj-y += rzg2l-cru/
> obj-y += vsp1/
>
> obj-$(CONFIG_VIDEO_RCAR_CSI2) += rcar-csi2.o
> obj-$(CONFIG_VIDEO_RCAR_DRIF) += rcar_drif.o
> -obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o
> obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
> obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
> obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
> diff --git a/drivers/media/platform/renesas/rcar-isp/Kconfig b/drivers/media/platform/renesas/rcar-isp/Kconfig
> new file mode 100644
> index 000000000000..59e0d91862d1
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rcar-isp/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0
Add a blank line here.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> +config VIDEO_RCAR_ISP
> + tristate "R-Car Image Signal Processor (ISP)"
> + depends on V4L_PLATFORM_DRIVERS
> + depends on VIDEO_DEV && OF
> + depends on ARCH_RENESAS || COMPILE_TEST
> + select MEDIA_CONTROLLER
> + select VIDEO_V4L2_SUBDEV_API
> + select RESET_CONTROLLER
> + select V4L2_FWNODE
> + help
> + Support for Renesas R-Car Image Signal Processor (ISP).
> + Enable this to support the Renesas R-Car Image Signal
> + Processor (ISP).
> +
> + To compile this driver as a module, choose M here: the
> + module will be called rcar-isp.
> diff --git a/drivers/media/platform/renesas/rcar-isp/Makefile b/drivers/media/platform/renesas/rcar-isp/Makefile
> new file mode 100644
> index 000000000000..b542118c831e
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rcar-isp/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +rcar-isp-objs = csisp.o
> +
> +obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o
> diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> similarity index 100%
> rename from drivers/media/platform/renesas/rcar-isp.c
> rename to drivers/media/platform/renesas/rcar-isp/csisp.c
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-04-21 22:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-21 11:12 [PATCH v2 0/7] rcar-isp: Prepare for ISP core support Niklas Söderlund
2025-04-21 11:12 ` [PATCH v2 1/7] dt-bindings: media: renesas,isp: Add ISP core function block Niklas Söderlund
2025-04-21 22:36 ` Laurent Pinchart
2025-04-23 11:24 ` Geert Uytterhoeven
2025-04-23 12:24 ` Laurent Pinchart
2025-04-23 15:48 ` Rob Herring (Arm)
2025-04-21 11:12 ` [PATCH v2 2/7] arm64: dts: renesas: r8a779a0: " Niklas Söderlund
2025-04-21 11:12 ` [PATCH v2 3/7] arm64: dts: renesas: r8a779g0: " Niklas Söderlund
2025-04-21 11:12 ` [PATCH v2 4/7] arm64: dts: renesas: r8a779h0: " Niklas Söderlund
2025-04-21 11:12 ` [PATCH v2 5/7] media: rcar-isp: Move driver to own directory Niklas Söderlund
2025-04-21 22:42 ` Laurent Pinchart [this message]
2025-04-21 11:12 ` [PATCH v2 6/7] media: rcar-isp: Rename base register variable Niklas Söderlund
2025-04-21 22:47 ` Laurent Pinchart
2025-04-21 22:47 ` Laurent Pinchart
2025-04-21 11:12 ` [PATCH v2 7/7] media: rcar-isp: Parse named cs memory region Niklas Söderlund
2025-04-21 22:55 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250421224255.GA17813@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=hverkuil@xs4all.nl \
--cc=jacopo.mondi@ideasonboard.com \
--cc=krzk+dt@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox