From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Cc: Jian Shen <shenjian15@huawei.com>,
Salil Mehta <salil.mehta@huawei.com>,
Jijie Shao <shaojijie@huawei.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Sunil Goutham <sgoutham@marvell.com>,
Geetha sowjanya <gakula@marvell.com>,
Subbaraya Sundeep <sbhatta@marvell.com>,
Bharat Bhushan <bbhushan2@marvell.com>,
Tariq Toukan <tariqt@nvidia.com>,
Brett Creeley <brett.creeley@amd.com>,
Paul Barker <paul@pbarker.dev>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
linux-renesas-soc@vger.kernel.org,
Richard Cochran <richardcochran@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Simon Horman <horms@kernel.org>,
Jacob Keller <jacob.e.keller@intel.com>,
netdev@vger.kernel.org
Subject: Re: [PATCH net-next 4/6] net: ravb: convert to ndo_hwtstamp API
Date: Thu, 16 Oct 2025 20:17:37 +0200 [thread overview]
Message-ID: <20251016181737.GD856714@ragnatech.se> (raw)
In-Reply-To: <20251016180727.3511399-5-vadim.fedorenko@linux.dev>
Hi Vadim,
Thanks for your work.
On 2025-10-16 18:07:25 +0000, Vadim Fedorenko wrote:
> Convert driver to use .ndo_hwtstamp_set()/.ndo_hwtstamp_get callbacks.
> ravb_do_ioctl() becomes pure phy_do_ioctl_running(), remove it and
> replace in callbacks.
>
> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/net/ethernet/renesas/ravb_main.c | 61 ++++++++----------------
> 1 file changed, 19 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index 9d3bd65b85ff..113d7c7bd921 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -2390,41 +2390,38 @@ static int ravb_close(struct net_device *ndev)
> return 0;
> }
>
> -static int ravb_hwtstamp_get(struct net_device *ndev, struct ifreq *req)
> +static int ravb_hwtstamp_get(struct net_device *ndev,
> + struct kernel_hwtstamp_config *config)
> {
> struct ravb_private *priv = netdev_priv(ndev);
> - struct hwtstamp_config config;
>
> - config.flags = 0;
> - config.tx_type = priv->tstamp_tx_ctrl ? HWTSTAMP_TX_ON :
> - HWTSTAMP_TX_OFF;
> + config->flags = 0;
> + config->tx_type = priv->tstamp_tx_ctrl ? HWTSTAMP_TX_ON :
> + HWTSTAMP_TX_OFF;
> switch (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE) {
> case RAVB_RXTSTAMP_TYPE_V2_L2_EVENT:
> - config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
> + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
> break;
> case RAVB_RXTSTAMP_TYPE_ALL:
> - config.rx_filter = HWTSTAMP_FILTER_ALL;
> + config->rx_filter = HWTSTAMP_FILTER_ALL;
> break;
> default:
> - config.rx_filter = HWTSTAMP_FILTER_NONE;
> + config->rx_filter = HWTSTAMP_FILTER_NONE;
> }
>
> - return copy_to_user(req->ifr_data, &config, sizeof(config)) ?
> - -EFAULT : 0;
> + return 0;
> }
>
> /* Control hardware time stamping */
> -static int ravb_hwtstamp_set(struct net_device *ndev, struct ifreq *req)
> +static int ravb_hwtstamp_set(struct net_device *ndev,
> + struct kernel_hwtstamp_config *config,
> + struct netlink_ext_ack *extack)
> {
> struct ravb_private *priv = netdev_priv(ndev);
> - struct hwtstamp_config config;
> u32 tstamp_rx_ctrl = RAVB_RXTSTAMP_ENABLED;
> u32 tstamp_tx_ctrl;
>
> - if (copy_from_user(&config, req->ifr_data, sizeof(config)))
> - return -EFAULT;
> -
> - switch (config.tx_type) {
> + switch (config->tx_type) {
> case HWTSTAMP_TX_OFF:
> tstamp_tx_ctrl = 0;
> break;
> @@ -2435,7 +2432,7 @@ static int ravb_hwtstamp_set(struct net_device *ndev, struct ifreq *req)
> return -ERANGE;
> }
>
> - switch (config.rx_filter) {
> + switch (config->rx_filter) {
> case HWTSTAMP_FILTER_NONE:
> tstamp_rx_ctrl = 0;
> break;
> @@ -2443,36 +2440,14 @@ static int ravb_hwtstamp_set(struct net_device *ndev, struct ifreq *req)
> tstamp_rx_ctrl |= RAVB_RXTSTAMP_TYPE_V2_L2_EVENT;
> break;
> default:
> - config.rx_filter = HWTSTAMP_FILTER_ALL;
> + config->rx_filter = HWTSTAMP_FILTER_ALL;
> tstamp_rx_ctrl |= RAVB_RXTSTAMP_TYPE_ALL;
> }
>
> priv->tstamp_tx_ctrl = tstamp_tx_ctrl;
> priv->tstamp_rx_ctrl = tstamp_rx_ctrl;
>
> - return copy_to_user(req->ifr_data, &config, sizeof(config)) ?
> - -EFAULT : 0;
> -}
> -
> -/* ioctl to device function */
> -static int ravb_do_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
> -{
> - struct phy_device *phydev = ndev->phydev;
> -
> - if (!netif_running(ndev))
> - return -EINVAL;
> -
> - if (!phydev)
> - return -ENODEV;
> -
> - switch (cmd) {
> - case SIOCGHWTSTAMP:
> - return ravb_hwtstamp_get(ndev, req);
> - case SIOCSHWTSTAMP:
> - return ravb_hwtstamp_set(ndev, req);
> - }
> -
> - return phy_mii_ioctl(phydev, req, cmd);
> + return 0;
> }
>
> static int ravb_change_mtu(struct net_device *ndev, int new_mtu)
> @@ -2608,11 +2583,13 @@ static const struct net_device_ops ravb_netdev_ops = {
> .ndo_get_stats = ravb_get_stats,
> .ndo_set_rx_mode = ravb_set_rx_mode,
> .ndo_tx_timeout = ravb_tx_timeout,
> - .ndo_eth_ioctl = ravb_do_ioctl,
> + .ndo_eth_ioctl = phy_do_ioctl_running,
> .ndo_change_mtu = ravb_change_mtu,
> .ndo_validate_addr = eth_validate_addr,
> .ndo_set_mac_address = eth_mac_addr,
> .ndo_set_features = ravb_set_features,
> + .ndo_hwtstamp_get = ravb_hwtstamp_get,
> + .ndo_hwtstamp_set = ravb_hwtstamp_set,
> };
>
> /* MDIO bus init function */
> --
> 2.47.3
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2025-10-16 18:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-16 18:07 [PATCH net-next 0/6] convert net drivers to ndo_hwtstamp API part 2 Vadim Fedorenko
2025-10-16 18:07 ` [PATCH net-next 1/6] octeontx2: convert to ndo_hwtstamp API Vadim Fedorenko
2025-10-16 18:14 ` Jacob Keller
2025-10-16 18:07 ` [PATCH net-next 2/6] mlx4: " Vadim Fedorenko
2025-10-16 18:16 ` Jacob Keller
2025-10-16 18:07 ` [PATCH net-next 3/6] ionic: " Vadim Fedorenko
2025-10-16 18:17 ` Jacob Keller
2025-10-16 18:07 ` [PATCH net-next 4/6] net: ravb: " Vadim Fedorenko
2025-10-16 18:17 ` Niklas Söderlund [this message]
2025-10-16 18:17 ` Jacob Keller
2025-10-16 18:07 ` [PATCH net-next 5/6] net: renesas: rswitch: " Vadim Fedorenko
2025-10-16 18:18 ` Jacob Keller
2025-10-16 18:07 ` [PATCH net-next 6/6] net: hns3: add hwtstamp_get/hwtstamp_set ops Vadim Fedorenko
2025-10-16 18:19 ` Jacob Keller
2025-10-17 9:15 ` Simon Horman
2025-10-17 10:22 ` Vadim Fedorenko
2025-10-17 11:19 ` kernel test robot
2025-10-16 18:20 ` [PATCH net-next 0/6] convert net drivers to ndo_hwtstamp API part 2 Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251016181737.GD856714@ragnatech.se \
--to=niklas.soderlund@ragnatech.se \
--cc=andrew+netdev@lunn.ch \
--cc=bbhushan2@marvell.com \
--cc=brett.creeley@amd.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gakula@marvell.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=paul@pbarker.dev \
--cc=richardcochran@gmail.com \
--cc=salil.mehta@huawei.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
--cc=shaojijie@huawei.com \
--cc=shenjian15@huawei.com \
--cc=tariqt@nvidia.com \
--cc=vadim.fedorenko@linux.dev \
--cc=vladimir.oltean@nxp.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).