From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: laurent.pinchart@ideasonboard.com, airlied@linux.ie,
dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Subject: [PATCH 3/4] rcar-du: add TCON connector driver
Date: Fri, 29 Apr 2016 00:04:33 +0300 [thread overview]
Message-ID: <2114462.VbyThWBxQO@wasted.cogentembedded.com> (raw)
In-Reply-To: <1787748.qAADjKK4gv@wasted.cogentembedded.com>
Renesas R-Car SoCs include the timing controller (TCON) that can directly
drive LCDs. It receives the H/VSYNC, etc. from the Display Unit (DU) and
converts them to the set of signals that a LCD panel can understand (the
RBG signals are effectively passed thru). Add the DRM connector driver for
the LCDs connected via the TCON interface...
Based on a large patch by Andrey Gusakov.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
drivers/gpu/drm/rcar-du/Makefile | 1
drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 5 +
drivers/gpu/drm/rcar-du/rcar_du_tconcon.c | 125 ++++++++++++++++++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_tconcon.h | 23 +++++
4 files changed, 154 insertions(+)
Index: linux/drivers/gpu/drm/rcar-du/Makefile
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/Makefile
+++ linux/drivers/gpu/drm/rcar-du/Makefile
@@ -4,6 +4,7 @@ rcar-du-drm-y := rcar_du_crtc.o \
rcar_du_group.o \
rcar_du_kms.o \
rcar_du_lvdscon.o \
+ rcar_du_tconcon.o \
rcar_du_plane.o \
rcar_du_vgacon.o
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -24,6 +24,7 @@
#include "rcar_du_kms.h"
#include "rcar_du_lvdscon.h"
#include "rcar_du_lvdsenc.h"
+#include "rcar_du_tconcon.h"
#include "rcar_du_tconenc.h"
#include "rcar_du_vgacon.h"
@@ -194,6 +195,10 @@ int rcar_du_encoder_init(struct rcar_du_
ret = rcar_du_vga_connector_init(rcdu, renc);
break;
+ case RCAR_DU_ENCODER_TCON:
+ ret = rcar_du_tcon_connector_init(rcdu, renc, con_node);
+ break;
+
case DRM_MODE_ENCODER_TMDS:
ret = rcar_du_hdmi_connector_init(rcdu, renc);
break;
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_tconcon.c
===================================================================
--- /dev/null
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_tconcon.c
@@ -0,0 +1,125 @@
+/*
+ * rcar_du_tconcon.c -- R-Car Display Unit TCON Connector
+ *
+ * Copyright (C) 2015-2016 Cogent Embedded, Inc. <source@cogentembedded.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder_slave.h>
+
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_encoder.h"
+#include "rcar_du_kms.h"
+#include "rcar_du_tconcon.h"
+
+struct rcar_du_tcon_connector {
+ struct rcar_du_connector connector;
+
+ struct {
+ unsigned int width_mm; /* Panel width in mm */
+ unsigned int height_mm; /* Panel height in mm */
+ struct videomode mode;
+ } panel;
+};
+
+#define to_rcar_tcon_connector(c) \
+ container_of(c, struct rcar_du_tcon_connector, connector.connector)
+
+static int rcar_du_tcon_connector_get_modes(struct drm_connector *connector)
+{
+ struct rcar_du_tcon_connector *tconcon =
+ to_rcar_tcon_connector(connector);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_create(connector->dev);
+ if (mode == NULL)
+ return 0;
+
+ mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
+
+ drm_display_mode_from_videomode(&tconcon->panel.mode, mode);
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_connector_helper_funcs connector_helper_funcs = {
+ .get_modes = rcar_du_tcon_connector_get_modes,
+ .best_encoder = rcar_du_connector_best_encoder,
+};
+
+static enum drm_connector_status
+rcar_du_tcon_connector_detect(struct drm_connector *connector, bool force)
+{
+ return connector_status_connected;
+}
+
+static const struct drm_connector_funcs connector_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .reset = drm_atomic_helper_connector_reset,
+ .detect = rcar_du_tcon_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = drm_connector_cleanup,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+int rcar_du_tcon_connector_init(struct rcar_du_device *rcdu,
+ struct rcar_du_encoder *renc,
+ /* TODO const */ struct device_node *np)
+{
+ struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
+ struct rcar_du_tcon_connector *tconcon;
+ struct drm_connector *connector;
+ struct display_timing timing;
+ int ret;
+
+ tconcon = devm_kzalloc(rcdu->dev, sizeof(*tconcon), GFP_KERNEL);
+ if (tconcon == NULL)
+ return -ENOMEM;
+
+ ret = of_get_display_timing(np, "panel-timing", &timing);
+ if (ret < 0)
+ return ret;
+
+ videomode_from_timing(&timing, &tconcon->panel.mode);
+
+ of_property_read_u32(np, "width-mm", &tconcon->panel.width_mm);
+ of_property_read_u32(np, "height-mm", &tconcon->panel.height_mm);
+
+ connector = &tconcon->connector.connector;
+ connector->display_info.width_mm = tconcon->panel.width_mm;
+ connector->display_info.height_mm = tconcon->panel.height_mm;
+
+ ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
+ DRM_MODE_CONNECTOR_TCON);
+ if (ret < 0)
+ return ret;
+
+ drm_connector_helper_add(connector, &connector_helper_funcs);
+
+ connector->dpms = DRM_MODE_DPMS_OFF;
+ drm_object_property_set_value(&connector->base,
+ rcdu->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF);
+
+ ret = drm_mode_connector_attach_encoder(connector, encoder);
+ if (ret < 0)
+ return ret;
+
+ tconcon->connector.encoder = renc;
+
+ return 0;
+}
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_tconcon.h
===================================================================
--- /dev/null
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_tconcon.h
@@ -0,0 +1,23 @@
+/*
+ * rcar_du_tconcon.h -- R-Car Display Unit LVDS Connector
+ *
+ * Copyright (C) 2015-2016 CogentEmbedded, Inc. <source@cogentembedded.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __RCAR_DU_TCONCON_H__
+#define __RCAR_DU_TCONCON_H__
+
+struct rcar_du_device;
+struct rcar_du_encoder;
+struct rcar_du_panel_data;
+
+int rcar_du_tcon_connector_init(struct rcar_du_device *rcdu,
+ struct rcar_du_encoder *renc,
+ struct device_node *np);
+
+#endif /* __RCAR_DU_TCONCON_H__ */
next prev parent reply other threads:[~2016-04-28 21:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-28 21:00 [PATCH 0/4] Add TCON support to the R-Car DU driver Sergei Shtylyov
2016-04-28 21:02 ` [PATCH 1/4] drm_mode: add TCON encoder/connector Sergei Shtylyov
2016-04-29 9:13 ` Daniel Vetter
2016-04-28 21:03 ` [PATCH 2/4] rcar-du: add TCON encoder driver Sergei Shtylyov
2016-05-27 21:28 ` Laurent Pinchart
2016-04-28 21:04 ` Sergei Shtylyov [this message]
2016-04-28 21:05 ` [PATCH 4/4] rcar-du: add R8A7794 TCON support Sergei Shtylyov
2016-05-27 21:33 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2114462.VbyThWBxQO@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox