From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC v2 5/12] ARM: dts: r8a7743: initial SoC device tree
Date: Fri, 30 Sep 2016 01:25:42 +0300 [thread overview]
Message-ID: <30745799.9Kqd9vtaYp@wasted.cogentembedded.com> (raw)
In-Reply-To: <1987532.PE2ex6PrJ5@wasted.cogentembedded.com>
The initial R8A7743 SoC device tree including CPU cores, GIC, timer, SYSC,
and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added the IRQC and Ether clocks.
arch/arm/boot/dts/r8a7743.dtsi | 235 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 235 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7743.dtsi
===================================================================
--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7743.dtsi
@@ -0,0 +1,235 @@
+/*
+ * Device Tree Source for the r8a7743 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7743-clock.h>
+#include <dt-bindings/power/r8a7743-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7743";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ clocks = <&cpg_clocks R8A7743_CLK_Z>;
+ power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+ next-level-cache = <&L2_CA15>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clock-frequency = <1500000000>;
+ power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
+ next-level-cache = <&L2_CA15>;
+ };
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7743_PD_CA15_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7743-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7743-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk &usb_extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "z",
+ "rcan";
+ #power-domain-cells = <0>;
+ };
+
+ /* Fixed factor clocks */
+ pll1_div2_clk: pll1_div2 {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7743_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+ zs_clk: zs {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7743_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ };
+ p_clk: p {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7743_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ };
+ mp_clk: mp {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ };
+ cp_clk: cp {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /* Gate clocks */
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7743-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7743_CLK_SCIFA2 R8A7743_CLK_SCIFA1
+ R8A7743_CLK_SCIFA0 R8A7743_CLK_SCIFB0
+ R8A7743_CLK_SCIFB1 R8A7743_CLK_SCIFB2
+ R8A7743_CLK_SYS_DMAC1 R8A7743_CLK_SYS_DMAC0
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0",
+ "scifb0", "scifb1", "scifb2",
+ "sys-dmac1", "sys-dmac0";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7743-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7743_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7743-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7743_CLK_HSCIF2 R8A7743_CLK_SCIF5
+ R8A7743_CLK_SCIF4 R8A7743_CLK_HSCIF1
+ R8A7743_CLK_HSCIF0 R8A7743_CLK_SCIF3
+ R8A7743_CLK_SCIF2 R8A7743_CLK_SCIF1
+ R8A7743_CLK_SCIF0
+ >;
+ clock-output-names =
+ "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+ "scif3", "scif2", "scif1", "scif0";
+ };
+ mstp8_clks: mstp8_clks@e6150990 {
+ compatible = "renesas,r8a7743-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+ clocks = <&p_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7743_CLK_ETHER>;
+ clock-output-names = "ether";
+ };
+ mstp11_clks: mstp11_clks@e615099c {
+ compatible = "renesas,r8a7743-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7743_CLK_SCIFA3 R8A7743_CLK_SCIFA4
+ R8A7743_CLK_SCIFA5
+ >;
+ clock-output-names = "scifa3", "scifa4", "scifa5";
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
next prev parent reply other threads:[~2016-09-29 22:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-29 22:14 [PATCH RFC v2 0/12] Add R8A7743/SK-RZG1M board support Sergei Shtylyov
2016-09-29 22:16 ` [PATCH RFC v2 1/12] ARM: shmobile: r8a7743: add clock index macros Sergei Shtylyov
2016-09-29 22:17 ` [PATCH RFC v2 2/12] ARM: shmobile: r8a7743: add power domain " Sergei Shtylyov
2016-09-29 22:21 ` [PATCH RFC v2 3/12] soc: renesas: rcar-sysc: add R8A7743 support Sergei Shtylyov
2016-09-29 22:23 ` [PATCH RFC v2 4/12] ARM: shmobile: r8a7743: basic SoC support Sergei Shtylyov
2016-10-05 10:32 ` Laurent Pinchart
2016-09-29 22:25 ` Sergei Shtylyov [this message]
2016-09-29 22:26 ` [PATCH RFC v2 6/12] ARM: dts: r8a7743: add SYS-DMAC support Sergei Shtylyov
2016-09-29 22:28 ` [PATCH RFC v2 7/12] ARM: dts: r8a7743: add [H]SCIF[AB] support Sergei Shtylyov
2016-09-29 22:29 ` [PATCH RFC v2 8/12] ARM: dts: r8a7743: add Ether support Sergei Shtylyov
2016-09-29 22:30 ` [PATCH RFC v2 9/12] ARM: dts: r8a7743: add IRQC support Sergei Shtylyov
2016-09-29 22:32 ` [PATCH RFC v2 10/12] DT: arm: shmobile: document SK-RZG1M board Sergei Shtylyov
2016-09-30 8:32 ` Geert Uytterhoeven
2016-09-29 22:34 ` [PATCH RFC v2 11/12] ARM: dts: sk-rzg1m: initial device tree Sergei Shtylyov
2016-10-05 7:46 ` Geert Uytterhoeven
2016-09-29 22:35 ` [PATCH RFC v2 12/12] ARM: dts: sk-rzg1m: add Ether support Sergei Shtylyov
2016-10-01 11:29 ` [PATCH RFC v2 0/12] Add R8A7743/SK-RZG1M board support Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30745799.9Kqd9vtaYp@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox