Re: [PATCH V3 3/6] thermal: Register hwmon in thermal_zone_of_sensor_register_param()

[Marek Vasut <marek.vasut@gmail.com>]

On 12/18/2018 10:44 PM, Eduardo Valentin wrote:
> On Mon, Dec 17, 2018 at 04:56:41PM +0100, marek.vasut@gmail.com wrote:
>> From: Marek Vasut <marek.vasut@gmail.com>
>>
>> Register hwmon sysfs interface in thermal_zone_of_sensor_register_param()
>> in case thermal_zone_params->no_hwmon is set to false. This behavior is
>> the same as thermal_zone_device_register().
>>
>> From: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Cc: Eduardo Valentin <edubezval@gmail.com>
>> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
>> Cc: Zhang Rui <rui.zhang@intel.com>
>> Cc: linux-renesas-soc@vger.kernel.org
>> To: linux-pm@vger.kernel.org
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> ---
>> V2: No change
>> V3: - Work around the From line and SoB line checkpatch warning
>>     - Reorder the SoB line at the end
>> ---
>>  drivers/thermal/of-thermal.c | 12 +++++++++++-
>>  1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
>> index e1a303a5698c..5ccff7b678de 100644
>> --- a/drivers/thermal/of-thermal.c
>> +++ b/drivers/thermal/of-thermal.c
>> @@ -15,6 +15,7 @@
>>  #include <linux/string.h>
>>  
>>  #include "thermal_core.h"
>> +#include "thermal_hwmon.h"
>>  
>>  /***   Private data structures to represent thermal device tree data ***/
>>  
>> @@ -521,8 +522,15 @@ thermal_zone_of_sensor_register_params(struct device *dev, int sensor_id,
>>  		if (sensor_specs.np == sensor_np && id == sensor_id) {
>>  			tzd = thermal_zone_of_add_sensor(child, sensor_np,
>>  							 data, ops);
>> -			if (!IS_ERR(tzd))
>> +			if (!IS_ERR(tzd)) {
>> +				tzd->tzp = tzp;
> 
> So, here you will overwrite what was done in of_parse_thermal_zones().
> That means, after this point, property like sustainable power, slope and
> offset are gone.

Hmmmmm, that was rather inobvious, indeed.

Do you have some suggestion how to pass in the no_hwmon = false then ?
Since tzp->no_hwmon is set to true in of_parse_thermal_zones(), the
three drivers (stm32, rcar, rcar_gen3) seem to hack around it. I'd like
to clean that up.

-- 
Best regards,
Marek Vasut