Linux Renesas SOC kernel development
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 6/6] ARM: dts: silk: add sound support
Date: Thu, 12 May 2016 23:51:32 +0300	[thread overview]
Message-ID: <9205499.bquhjWrlAH@wasted.cogentembedded.com> (raw)
In-Reply-To: <2378837.cigT3tNQPe@wasted.cogentembedded.com>

Define the SILK board dependent part of the R8A7794 sound  device node.
Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
sound support").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against  the 'renesas-devel-20160509-v4.6-rc7' tag of Simon
Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
posted earlier in order to build...

Changes in version 3:
- new patch in this series;
- renamed the X9 clock node, getting rid of the "clock-output-names" property;
- removed the "renesas," prefix from the pin properties;
- refreshed the patch.

 arch/arm/boot/dts/r8a7794-silk.dts |   70 +++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -193,6 +227,16 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
 		function = "du1";
 	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -230,6 +274,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -392,3 +442,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};

  parent reply	other threads:[~2016-05-12 20:51 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-12 20:38 [PATCH v3 0/6] Add R8A7794/SILK sound DT support Sergei Shtylyov
2016-05-12 20:40 ` [PATCH v3 1/6] ARM: dts: r8a7794: add audio clocks Sergei Shtylyov
2016-05-12 20:45 ` [PATCH v3 2/6] ARM: dts: r8a7794: add MSTP5 clocks Sergei Shtylyov
2016-05-19 16:25   ` Geert Uytterhoeven
2016-05-19 17:30     ` Sergei Shtylyov
2016-05-20  4:20       ` Simon Horman
2016-05-12 20:46 ` [PATCH v3 3/6] ARM: dts: r8a7794: add MSTP10 clocks Sergei Shtylyov
2016-05-19 16:44   ` Geert Uytterhoeven
2016-05-19 17:37     ` Sergei Shtylyov
2016-05-19 17:41       ` Geert Uytterhoeven
2016-05-19 18:36         ` Sergei Shtylyov
2016-05-20  4:22           ` Simon Horman
2016-05-12 20:47 ` [PATCH v3 4/6] ARM: dts: r8a7794: add Audio-DMAC support Sergei Shtylyov
2016-05-13  6:12   ` Geert Uytterhoeven
2016-05-12 20:49 ` [PATCH v3 5/6] ARM: dts: r8a7794: add sound support Sergei Shtylyov
2016-05-13  6:13   ` Geert Uytterhoeven
2016-05-12 20:51 ` Sergei Shtylyov [this message]
2016-05-12 21:16 ` [PATCH v3 0/6] Add R8A7794/SILK sound DT support Sergei Shtylyov
2016-06-06 18:11   ` Sergei Shtylyov
2016-06-07  0:37     ` Simon Horman
2016-06-07 10:31       ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9205499.bquhjWrlAH@wasted.cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=horms@verge.net.au \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox