messages from 2017-12-06 10:22:01 to 2017-12-08 08:33:14 UTC [more...]
[PATCH v9 00/28] rcar-vin: Add Gen3 with media controller
2017-12-08 8:33 UTC (38+ messages)
` [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation
` [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions
` [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
` [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks
` [PATCH v9 05/28] rcar-vin: move chip information to own struct
` [PATCH v9 06/28] rcar-vin: move max width and height information to chip information
` [PATCH v9 07/28] rcar-vin: change name of video device
` [PATCH v9 08/28] rcar-vin: move functions regarding scaling
` [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic
` [PATCH v9 10/28] rcar-vin: do not reset crop and compose when setting format
` [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming
` [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed
` [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
` [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info
` [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration
` [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value
` [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode
` [PATCH v9 18/28] rcar-vin: break out format alignment and checking
` [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode
` [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization
` [PATCH v9 21/28] rcar-vin: add group allocator functions
` [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info
` [PATCH v9 23/28] rcar-vin: parse Gen3 OF and setup media graph
` [PATCH v9 24/28] rcar-vin: add link notify for Gen3
` [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller
` [PATCH v9 26/28] rcar-vin: enable support for r8a7795
` [PATCH v9 27/28] rcar-vin: enable support for r8a7796
` [PATCH v9 28/28] rcar-vin: enable support for r8a77970
[PATCH] kmstest.py: Update to th latest kmsxx Python bindings
2017-12-07 18:33 UTC
[PATCH v4 1/4] phylib: Add device reset GPIO support
2017-12-07 17:40 UTC (4+ messages)
` [PATCH v4.1] "
issue on rcar-du and/or vsp suspend-resume paths
2017-12-07 13:47 UTC (2+ messages)
[PATCH] spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()
2017-12-07 12:35 UTC (2+ messages)
` Applied "spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()" to the spi tree
[PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar
2017-12-07 11:25 UTC (7+ messages)
` [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
[PATCH] i2c: imx: use proper GPIO directions for recovery
2017-12-07 11:04 UTC (2+ messages)
[PATCH v5] v4l2-async: Match parent devices
2017-12-07 11:03 UTC (5+ messages)
[PATCH 0/2] PCI: rcar: Misc error path fixes
2017-12-07 10:29 UTC (4+ messages)
` [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path
` [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures
[PATCH] gpio: gpio-rcar: Support S2RAM
2017-12-07 10:27 UTC (6+ messages)
[PATCH 0/2] ARM: dts: r8a7743: Timer node nodes out of bus
2017-12-07 10:19 UTC (3+ messages)
` [PATCH 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically
` [PATCH 2/2] ARM: dts: r8a7743: move timer node out of bus
[PATCH v4] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
2017-12-07 10:00 UTC (2+ messages)
[PATCH 0/4] arm64: dts: renesas: r8a779[56] and salvator-common: add usb3_phy and enable usb3_peri0
2017-12-07 9:55 UTC (5+ messages)
` [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node
` [PATCH 2/4] arm64: dts: renesas: r8a7796: "
` [PATCH 3/4] arm64: dts: renesas: salvator-common: enable usb3_phy0 node
` [PATCH 4/4] arm64: dts: renesas: salvator-common: enable usb3_peri0
[GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.16
2017-12-07 9:53 UTC (55+ messages)
` [PATCH 01/54] arm64: dts: renesas: salvator: set driver type for eMMC
` [PATCH 02/54] arm64: dts: renesas: r8a7795: Use R-Car SDHI Gen3 fallback compat string
` [PATCH 03/54] arm64: dts: renesas: r8a7796: "
` [PATCH 04/54] arm64: dts: renesas: r8a77970: Add RWDT node
` [PATCH 05/54] arm64: dts: renesas: eagle: Move avb node to preserve sort order
` [PATCH 06/54] arm64: dts: renesas: eagle: Enable watchdog timer
` [PATCH 07/54] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W
` [PATCH 08/54] arm64: dts: renesas: r8a7796: Add IPMMU device nodes
` [PATCH 09/54] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1
` [PATCH 10/54] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP
` [PATCH 11/54] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0
` [PATCH 12/54] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0
` [PATCH 13/54] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0
` [PATCH 14/54] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM
` [PATCH 15/54] arm64: dts: renesas: ulcb-kf: enable USB2 PHY of channel 0
` [PATCH 16/54] arm64: dts: renesas: ulcb-kf: add dr_mode property for USB2.0 "
` [PATCH 17/54] arm64: dts: renesas: r8a77995: add SYS-DMAC nodes
` [PATCH 18/54] arm64: dts: renesas: r8a77995: Add SDHI (MMC) support
` [PATCH 19/54] arm64: dts: renesas: r8a7795: Add IPMMU device nodes
` [PATCH 20/54] arm64: dts: renesas: r8a7795-es1: "
` [PATCH 21/54] arm64: dts: renesas: r8a7795: Tie SYS-DMAC to IPMMU-DS0/1
` [PATCH 22/54] arm64: dts: renesas: r8a7795: Tie Audio-DMAC to IPMMU-MP0/1
` [PATCH 23/54] arm64: dts: renesas: r8a7795: Point DU/VSPD via FCPVD to IPMMU-VI0/1
` [PATCH 24/54] arm64: dts: renesas: r8a7795-es1: Point DU/VSPD via FCPVD to IPMMU-VI0
` [PATCH 25/54] arm64: dts: renesas: r8a7795: Point FDP1 via FCPF to IPMMU-VP0/1
` [PATCH 26/54] arm64: dts: renesas: r8a7795-es1: Point FDP1 via FCPF to IPMMU-VP0
` [PATCH 27/54] arm64: dts: renesas: r8a7795: Point VSPBC/VSPBD via FCPVB to IPMMU-VP0/1
` [PATCH 28/54] arm64: dts: renesas: r8a7795: Point VSPI via FCPVI "
` [PATCH 29/54] arm64: dts: renesas: r8a7795-es1: Point VSPI via FCPVI to IPMMU-VP
` [PATCH 30/54] arm64: dts: renesas: r8a7795: Connect Ethernet-AVB to IPMMU-DS0
` [PATCH 31/54] arm64: dts: renesas: r8a7795: Connect SATA to IPMMU-HC
` [PATCH 32/54] arm64: dts: renesas: r8a7795-es1: Enable IPMMU-MP1
` [PATCH 33/54] arm64: dts: renesas: r8a7795: Enable IPMMU-VI0, VP1, DS0, DS1 and MM
` [PATCH 34/54] arm64: dts: renesas: salvator-common: Add BD9571 PMIC
` [PATCH 35/54] arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header
` [PATCH 36/54] arm64: dts: renesas: r8a7795-salvator-x: "
` [PATCH 37/54] arm64: dts: renesas: r8a7796-salvator-x: "
` [PATCH 38/54] arm64: dts: renesas: r8a7795-salvator-xs: "
` [PATCH 39/54] arm64: dts: renesas: r8a77995: Add CAN external clock support
` [PATCH 40/54] arm64: dts: renesas: r8a77995: Add CAN support
` [PATCH 41/54] arm64: dts: renesas: r8a77995: Add CAN FD support
` [PATCH 42/54] arm64: dts: renesas: r8a7795: Increase the number of GPIO bank 1 ports to 29
` [PATCH 43/54] arm64: dts: renesas: r8a77970: sort includes
` [PATCH 44/54] arm64: dts: renesas: r8a77995: add DMA for SCIF2
` [PATCH 45/54] arm64: dts: renesas: r8a77970: Add IPMMU device nodes
` [PATCH 46/54] arm64: dts: renesas: r8a77970: Tie SYS-DMAC to IPMMU-DS1
` [PATCH 47/54] arm64: dts: renesas: r8a77970: Connect Ethernet-AVB to IPMMU-RT
` [PATCH 48/54] arm64: dts: renesas: r8a77970: Enable IPMMU-DS1, RT and MM
` [PATCH 49/54] arm64: dts: renesas: r8a77995: Add IPMMU device nodes
` [PATCH 50/54] arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT
` [PATCH 51/54] arm64: dts: renesas: initial V3MSK board device tree
` [PATCH 52/54] arm64: dts: renesas: v3msk: add EtherAVB support
` [PATCH 53/54] arm64: dts: renesas: r8a77970: use CPG core clock macros
` [PATCH 54/54] arm64: dts: renesas: r8a77970: use SYSC power domain macros
[PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core
2017-12-07 9:03 UTC (3+ messages)
[PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
2017-12-06 18:56 UTC (2+ messages)
NFS crash, hashed pointers in backtrace
2017-12-06 16:19 UTC (4+ messages)
[PATCH 0/8] ARM: renesas: Latest r8a774[35] dts updates
2017-12-06 11:59 UTC (9+ messages)
` [PATCH 1/8] ARM: dts: r8a7745: Add APMU node and second CPU core
[GIT PULL] Renesas ARM Based SoC DT Updates for v4.16
2017-12-06 10:22 UTC (62+ messages)
` [PATCH 01/61] ARM: dts: r8a7743: Use R-Car Gen2 Ether fallback compat string
` [PATCH 02/61] ARM: dts: r8a7745: "
` [PATCH 03/61] ARM: dts: r8a7778: Use R-Car Gen1 "
` [PATCH 04/61] ARM: dts: r8a7790: Use R-Car Gen2 "
` [PATCH 05/61] ARM: dts: r8a7791: "
` [PATCH 06/61] ARM: dts: r8a7793: "
` [PATCH 07/61] ARM: dts: r8a7794: "
` [PATCH 08/61] ARM: dts: r8a7743: Add DU support
` [PATCH 09/61] ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video output
` [PATCH 10/61] ARM: dts: iwg22d: Use /dev/ttySC3 as debug console
` [PATCH 11/61] ARM: dts: iwg22d: Add /dev/ttySC5 support
` [PATCH 12/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DB
` [PATCH 13/61] ARM: dts: iwg22d-sodimm: sort dt nodes
` [PATCH 14/61] ARM: dts: r8a7745: Add HS-USB device node
` [PATCH 15/61] ARM: dts: r8a7745: Add USB-DMAC device nodes
` [PATCH 16/61] ARM: dts: r8a7745: Enable DMA for HSUSB
` [PATCH 17/61] ARM: dts: iwg22d-sodimm: Enable HS-USB
` [PATCH 18/61] ARM: dts: r8a7745: Add IIC cores to dtsi
` [PATCH 19/61] ARM: dts: r8a7743: Use R-Car SDHI Gen2 fallback compat string
` [PATCH 20/61] ARM: dts: r8a7745: "
` [PATCH 21/61] ARM: dts: r8a7778: Use R-Car SDHI Gen1 "
` [PATCH 22/61] ARM: dts: r8a7779: "
` [PATCH 23/61] ARM: dts: r8a7790: Use R-Car SDHI Gen2 "
` [PATCH 24/61] ARM: dts: r8a7791: "
` [PATCH 25/61] ARM: dts: r8a7792: "
` [PATCH 26/61] ARM: dts: r8a7793: "
` [PATCH 27/61] ARM: dts: r8a7794: "
` [PATCH 28/61] ARM: dts: iwg20d-q7: Add support for ttySC3
` [PATCH 29/61] ARM: dts: koelsch: Move cec_clock to root node
` [PATCH 30/61] ARM: dts: r8a7745: Add DU support
` [PATCH 31/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add HDMI video output
` [PATCH 32/61] ARM: dts: r8a7745: Add CAN[01] SoC support
` [PATCH 33/61] ARM: dts: iwg22d-sodimm: Add can0 support to carrier board
` [PATCH 34/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add can1 support to HDMI DB
` [PATCH 35/61] ARM: dts: r8a7743: Add CAN[01] SoC support
` [PATCH 36/61] ARM: dts: iwg20d-q7-common: Add can0 support to carrier board
` [PATCH 37/61] ARM: dts: iwg20d-q7-dbcm-ca: Add can1 support to camera DB
` [PATCH 38/61] ARM: dts: r8a7743: Add default PCIe bus clock
` [PATCH 39/61] ARM: dts: r8a7743: Add PCIe Controller device node
` [PATCH 40/61] ARM: dts: iwg20d-q7: Enable PCIe Controller
` [PATCH 41/61] ARM: dts: r8a7743: add VIN dt support
` [PATCH 42/61] ARM: dts: r8a7745: "
` [PATCH 43/61] ARM: dts: koelsch: Correct primary compatible value for eeprom
` [PATCH 44/61] ARM: dts: genmai: "
` [PATCH 45/61] ARM: dts: r8a7794: Add SMP support
` [PATCH 46/61] ARM: dts: r8a73a4: Update CMT compat string
` [PATCH 47/61] ARM: dts: r8a7790: Update CMT compat strings
` [PATCH 48/61] ARM: dts: r8a7791: "
` [PATCH 49/61] ARM: dts: r8a7793: "
` [PATCH 50/61] ARM: dts: r8a7794: "
` [PATCH 51/61] ARM: dts: r8a73a4: Remove CMT renesas,channels-mask
` [PATCH 52/61] ARM: dts: r8a7740: "
` [PATCH 53/61] ARM: dts: r8a7790: "
` [PATCH 54/61] ARM: dts: r8a7791: "
` [PATCH 55/61] ARM: dts: r8a7793: "
` [PATCH 56/61] ARM: dts: r8a7794: "
` [PATCH 57/61] ARM: dts: sh73a0: "
` [PATCH 58/61] ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings
` [PATCH 59/61] ARM: dts: lager: "
` [PATCH 60/61] ARM: dts: koelsch: "
` [PATCH 61/61] ARM: dts: alt: "
[GIT PULL] Renesas ARM Based SoC Updates for v4.16
2017-12-06 10:21 UTC (2+ messages)
` [PATCH 1/1] soc: renesas: Identify R-Car M3-W ES1.1
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox