Linux Renesas SOC kernel development
 help / color / mirror / Atom feed
 messages from 2018-10-05 03:00:14 to 2018-10-11 07:30:02 UTC [more...]

[PATCH v2 0/2] Add R8A77980/Condor PCIe support
 2018-10-11  7:30 UTC  (21+ messages)
` [PATCH] arm64: dts: renesas: r8a77970: add thermal support
` [PATCH] arm64: dts: renesas: r8a77980: "
` [PATCH v2] arm64: dts: renesas: r8a77970: "
` [PATCH v2] arm64: dts: renesas: r8a77980: "

[renesas-drivers:sh-pfc-for-v4.20 24/25] drivers/pinctrl/pinctrl-rzn1.c:935:3-8: No need to set .owner here. The core will do it
 2018-10-10 16:02 UTC  (2+ messages)
` [PATCH] pinctrl: renesas: fix platform_no_drv_owner.cocci warnings

[PATCH v3 0/3] mmc: tmio_mmc: Add support for RZ/A2
 2018-10-10 15:06 UTC  (4+ messages)
` [PATCH v3 1/3] clk: renesas: r7s9210: Add SDHI clocks
` [PATCH v3 2/3] mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
` [PATCH v3 3/3] dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210

[PATCH v2 0/3] mmc: tmio_mmc: Add support for RZ/A2
 2018-10-10 14:59 UTC  (6+ messages)
` [PATCH v2 1/3] clk: renesas: r7s9210: Add SDHI clocks
` [PATCH v2 2/3] mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
` [PATCH v2 3/3] dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210

[PATCH] arm64: dts: renesas: r8a77990: Add DMA properties to MSIOF nodes
 2018-10-10 12:39 UTC  (2+ messages)

[PATCH v2] mmc: tmio: Add initial setting of interrupt mask register
 2018-10-10 11:39 UTC  (6+ messages)

[PATCH] clocksource/drivers/sh_cmt: wait for CMCNT on init
 2018-10-10 11:06 UTC  (9+ messages)

[PATCH 0/3] mmc: tmio_mmc: Add support for RZ/A2
 2018-10-10 10:59 UTC  (8+ messages)
` [PATCH 1/3] clk: renesas: r7s9210: Add SDHI clocks
` [PATCH 2/3] mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
` [PATCH 3/3] dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210

[PATCH 0/2] Add R8A77980 support to the Renesas R-Car gen3 thermal driver
 2018-10-10 10:24 UTC  (7+ messages)
` [PATCH 1/2] dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
` [PATCH 2/2] thermal: rcar_gen3_thermal: add R8A77980 support

[PATCH v3 0/6] Add uSD and eMMC to iwg23s
 2018-10-10  9:26 UTC  (10+ messages)
` [PATCH v3 1/6] dt-bindings: mmc: renesas_sdhi: Add r8a77470 support
` [PATCH v3 2/6] pinctrl: sh-pfc: r8a77470: Add SDHI support
` [PATCH v3 3/6] mmc: renesas_sdhi: Add r8a77470 SDHI1 support
` [PATCH v3 4/6] ARM: dts: r8a77470: Add SDHI0 support
` [PATCH v3 5/6] ARM: dts: r8a77470: Add SDHI1 support
` [PATCH v3 6/6] ARM: dts: iwg23s-sbc: Add uSD and eMMC support

[PATCH] ARM: dts: r8a77470: Add I2C[0123] support
 2018-10-10  9:25 UTC  (3+ messages)

[git pull] pinctrl: sh-pfc: Updates for v4.20 (take three)
 2018-10-10  9:16 UTC  (2+ messages)

[PATCH 0/4] Improve pinctrl support for the RZ/G1C
 2018-10-10  8:17 UTC  (13+ messages)
` [PATCH 1/4] pinctrl: sh-pfc: r8a77470: Add remaining I2C pin groups
` [PATCH 2/4] pinctrl: sh-pfc: r8a77470: Add DU1 "
` [PATCH 3/4] pinctrl: sh-pfc: r8a77470: Add VIN "
` [PATCH 4/4] pinctrl: sh-pfc: r8a77470: Add QSPI1 "

[PATCH v3 0/2] mmc: tmio: remove confusing TMIO_MMC_HAVE_HIGH_REG flag
 2018-10-10  3:51 UTC  (3+ messages)
` [PATCH v3 1/2] mmc: tmio: move MFD variant reset to a platform hook
` [PATCH v3 2/2] mmc: tmio: remove TMIO_MMC_HAVE_HIGH_REG flag

[PATCH v2 0/2] mmc: tmio: remove confusing TMIO_MMC_HAVE_HIGH_REG flag
 2018-10-10  3:47 UTC  (4+ messages)
` [PATCH v2 1/2] mmc: tmio: move MFD variant reset to a platform hook

[PATCH v3 0/4] MAX9286 GMSL Support
 2018-10-09 20:57 UTC  (5+ messages)
` [PATCH v3 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286
` [PATCH v3 2/4] dt-bindings: media: i2c: Add bindings for IMI RDACM20
` [PATCH v3 3/4] media: i2c: Add MAX9286 driver
` [PATCH v3 4/4] media: i2c: Add RDACM20 driver

[PATCH] serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
 2018-10-09 17:41 UTC 

[PATCH] arm64: mm: Use #ifdef for the __PAGETABLE_P?D_FOLDED defines
 2018-10-09 14:19 UTC  (3+ messages)

renesas-drivers-2018-10-09-v4.19-rc7
 2018-10-09 12:49 UTC 

[PATCH v3 net-next] ravb: do not write 1 to reserved bits
 2018-10-09 11:53 UTC  (4+ messages)

[PATCH] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3
 2018-10-09 10:45 UTC 

[GIT PULL FOR renesas-drivers] D3 and E3 HDMI output support
 2018-10-09  8:41 UTC  (2+ messages)

[PATCH 05/36] dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
 2018-10-08 16:54 UTC  (10+ messages)
` [PATCH 29/36] dt-bindings: arm: Convert Renesas board/soc bindings to json-schema

[PATCH] drm/rcar-du: Convert drm_atomic_helper_suspend/resume()
 2018-10-08 16:27 UTC  (6+ messages)

[PATCH v2 0/3] rcar-vin: add support for UDS (Up Down Scaler)
 2018-10-08 16:23 UTC  (10+ messages)
` [PATCH v2 1/3] rcar-vin: align width before stream start
` [PATCH v2 2/3] rcar-vin: add support for UDS (Up Down Scaler)
` [PATCH v2 3/3] rcar-vin: declare which VINs can use a Up Down Scaler (UDS)

[PATCH] dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
 2018-10-08 14:46 UTC  (3+ messages)

[PATCH] kernel/bounds: Provide prototype for foo
 2018-10-08 14:41 UTC  (14+ messages)
` [PATCH] kbuild: fix kernel/bounds.c 'W=1' warning

[PATCH v2] reset: Exclusive resets must be dedicated to a single hardware block
 2018-10-08 12:57 UTC  (9+ messages)

[PATCH 1/2] i2c: rcar: refactor private flags
 2018-10-08 11:30 UTC  (4+ messages)

[RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
 2018-10-08 10:07 UTC  (7+ messages)
` [RFC PATCH 0/3] "
  ` [RFC PATCH 1/3] i2c: imx: implement master_xfer_irqless callback
  ` [RFC PATCH 2/3] watchdog: da9062: avoid regmap in restart handler
  ` [RFC PATCH 3/3] ARM: dts: phyboard-mira-dl: rely on PMIC for reboot and watchdog

[PATCH 0/2] Add R8A77970 support to the Renesas R-Car thermal driver
 2018-10-08  7:47 UTC  (7+ messages)
` [PATCH 1/2] dt-bindings: thermal: rcar-thermal: document R8A77970 bindings
` [PATCH 2/2] thermal: rcar_thermal: add R8A77970 support

[PATCH] dt-bindings: pwm: renesas-tpu: Document r8a7744 support
 2018-10-08  7:38 UTC  (2+ messages)

[PATCH] dt-bindings: pwm: rcar: Add r8a7744 support
 2018-10-08  7:35 UTC  (2+ messages)

[PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a7744
 2018-10-08  7:34 UTC  (2+ messages)

[GIT PULL] Renesas ARM64 Based SoC SoC Updates for v4.20
 2018-10-08  7:31 UTC  (8+ messages)

[PATCH 0/6] Add uSD and eMMC to iwg23s
 2018-10-08  7:30 UTC  (5+ messages)
` [PATCH 1/6] dt-bindings: mmc: renesas_sdhi: Add r8a77470 support

[PATCH V2] iio: adc: Fix Renesas GyroADC MAINTAINERS entry
 2018-10-07 15:51 UTC  (3+ messages)

[PATCH] dmaengine: rcar-dmac: set scatter/gather max segment size
 2018-10-07 14:34 UTC  (2+ messages)

[RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
 2018-10-05 16:15 UTC  (5+ messages)
` [RFC PATCH 1/4] i2c: core: remove outdated DEBUG output
` [RFC PATCH 2/4] i2c: core: remove level of indentation in i2c_transfer

[PATCH 00/12] i2c: quirks: add zero length checks and update drivers
 2018-10-05 16:08 UTC  (18+ messages)
` [PATCH 04/12] i2c: omap: use core to detect 'no zero length' quirk
` [PATCH 06/12] i2c: qup: "
` [PATCH 08/12] i2c: tegra: "
` [PATCH 09/12] i2c: zx2967: "

[PATCH 0/2] pinctrl: Add RZ/A2 pin and gpio driver
 2018-10-05 15:09 UTC  (3+ messages)
` [PATCH 1/2] pinctrl: Add RZ/A2 pin and gpio controller
` [PATCH 2/2] dt-bindings: pinctrl: Add RZ/A2 pinctrl and GPIO

[PATCH v2 0/5] i2c: adv748x: add support for CSI-2 TXA to work in 1-, 2- and 4-lane mode
 2018-10-05 10:46 UTC  (14+ messages)
` [PATCH v2 1/5] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints
` [PATCH v2 2/5] i2c: adv748x: reorder register writes for CSI-2 transmitters initialization
` [PATCH v2 3/5] i2c: adv748x: reuse power up sequence when initializing CSI-2
` [PATCH v2 4/5] i2c: adv748x: store number of CSI-2 lanes described in device tree
` [PATCH v2 5/5] i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter

[PATCH] v4l2-ioctl: fix CROPCAP type handling
 2018-10-05  0:24 UTC 

[PATCH] media: dt-bindings: media: rcar_vin: add device tree support for r8a7744
 2018-10-04 20:08 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox