[PATCH v2 00/11] can: rcar_can: Miscellaneous cleanups and improvements

[PATCH v2 00/11] can: rcar_can: Miscellaneous cleanups and improvements

[Geert Uytterhoeven]

	Hi all,

This patch series contains miscellaneous cleanups and improvements for
the R-Car CAN driver.  I deliberately sent this as a separate series
from "[PATCH] can: rcar_can: Fix s2ram with PSCI"[1], to avoid blocking
the latter.  However, this series (in particular [PATCH 3/9]) does
depend on it.

Changes compared to v1[2]:
  - Convert new Runtime PM error messages to %pe,
  - New patches 10 and 11.

Thanks for your comments!

[1] https://lore.kernel.org/699b2f7fcb60b31b6f976a37f08ce99c5ffccb31.1755165227.git.geert+renesas@glider.be
[2] https://lore.kernel.org/cover.1755172404.git.geert+renesas@glider.be

Geert Uytterhoeven (11):
  can: rcar_can: Consistently use ndev for net_device pointers
  can: rcar_can: Add helper variable dev to rcar_can_probe()
  can: rcar_can: Convert to Runtime PM
  can: rcar_can: Convert to BIT()
  can: rcar_can: Convert to GENMASK()
  can: rcar_can: CTLR bitfield conversion
  can: rcar_can: TFCR bitfield conversion
  can: rcar_can: BCR bitfield conversion
  can: rcar_can: Mailbox bitfield conversion
  can: rcar_can: Do not print alloc_candev() failures
  can: rcar_can: Convert to %pe

 drivers/net/can/rcar/rcar_can.c | 292 ++++++++++++++++----------------
 1 file changed, 149 insertions(+), 143 deletions(-)

-- 
2.43.0

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH v2 01/11] can: rcar_can: Consistently use ndev for net_device pointers

[Geert Uytterhoeven]

Most net_device pointers are named "ndev", but some are called "dev".
Increase uniformity by always using "ndev".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 87c134bcd48db559..5b0b495d127cdcb3 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -420,9 +420,9 @@ static irqreturn_t rcar_can_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void rcar_can_set_bittiming(struct net_device *dev)
+static void rcar_can_set_bittiming(struct net_device *ndev)
 {
-	struct rcar_can_priv *priv = netdev_priv(dev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
 	struct can_bittiming *bt = &priv->can.bittiming;
 	u32 bcr;
 
@@ -715,10 +715,10 @@ static int rcar_can_do_set_mode(struct net_device *ndev, enum can_mode mode)
 	}
 }
 
-static int rcar_can_get_berr_counter(const struct net_device *dev,
+static int rcar_can_get_berr_counter(const struct net_device *ndev,
 				     struct can_berr_counter *bec)
 {
-	struct rcar_can_priv *priv = netdev_priv(dev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
 	int err;
 
 	err = clk_prepare_enable(priv->clk);
-- 
2.43.0

[PATCH v2 02/11] can: rcar_can: Add helper variable dev to rcar_can_probe()

[Geert Uytterhoeven]

rcar_can_probe() has many users of "pdev->dev".  Introduce a shorthand
to simplify the code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 5b0b495d127cdcb3..57030992141cc523 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -738,6 +738,7 @@ static const char * const clock_names[] = {
 
 static int rcar_can_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct rcar_can_priv *priv;
 	struct net_device *ndev;
 	void __iomem *addr;
@@ -745,7 +746,7 @@ static int rcar_can_probe(struct platform_device *pdev)
 	int err = -ENODEV;
 	int irq;
 
-	of_property_read_u32(pdev->dev.of_node, "renesas,can-clock-select",
+	of_property_read_u32(dev->of_node, "renesas,can-clock-select",
 			     &clock_select);
 
 	irq = platform_get_irq(pdev, 0);
@@ -762,30 +763,29 @@ static int rcar_can_probe(struct platform_device *pdev)
 
 	ndev = alloc_candev(sizeof(struct rcar_can_priv), RCAR_CAN_FIFO_DEPTH);
 	if (!ndev) {
-		dev_err(&pdev->dev, "alloc_candev() failed\n");
+		dev_err(dev, "alloc_candev() failed\n");
 		err = -ENOMEM;
 		goto fail;
 	}
 
 	priv = netdev_priv(ndev);
 
-	priv->clk = devm_clk_get(&pdev->dev, "clkp1");
+	priv->clk = devm_clk_get(dev, "clkp1");
 	if (IS_ERR(priv->clk)) {
 		err = PTR_ERR(priv->clk);
-		dev_err(&pdev->dev, "cannot get peripheral clock, error %d\n",
-			err);
+		dev_err(dev, "cannot get peripheral clock, error %d\n", err);
 		goto fail_clk;
 	}
 
 	if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
 		err = -EINVAL;
-		dev_err(&pdev->dev, "invalid CAN clock selected\n");
+		dev_err(dev, "invalid CAN clock selected\n");
 		goto fail_clk;
 	}
-	priv->can_clk = devm_clk_get(&pdev->dev, clock_names[clock_select]);
+	priv->can_clk = devm_clk_get(dev, clock_names[clock_select]);
 	if (IS_ERR(priv->can_clk)) {
 		err = PTR_ERR(priv->can_clk);
-		dev_err(&pdev->dev, "cannot get CAN clock, error %d\n", err);
+		dev_err(dev, "cannot get CAN clock, error %d\n", err);
 		goto fail_clk;
 	}
 
@@ -802,18 +802,17 @@ static int rcar_can_probe(struct platform_device *pdev)
 	priv->can.do_get_berr_counter = rcar_can_get_berr_counter;
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING;
 	platform_set_drvdata(pdev, ndev);
-	SET_NETDEV_DEV(ndev, &pdev->dev);
+	SET_NETDEV_DEV(ndev, dev);
 
 	netif_napi_add_weight(ndev, &priv->napi, rcar_can_rx_poll,
 			      RCAR_CAN_NAPI_WEIGHT);
 	err = register_candev(ndev);
 	if (err) {
-		dev_err(&pdev->dev, "register_candev() failed, error %d\n",
-			err);
+		dev_err(dev, "register_candev() failed, error %d\n", err);
 		goto fail_candev;
 	}
 
-	dev_info(&pdev->dev, "device registered (IRQ%d)\n", ndev->irq);
+	dev_info(dev, "device registered (IRQ%d)\n", ndev->irq);
 
 	return 0;
 fail_candev:
-- 
2.43.0

[PATCH v2 03/11] can: rcar_can: Convert to Runtime PM

[Geert Uytterhoeven]

The R-Car CAN module is part of a Clock Domain on all supported SoCs.
Hence convert its driver from explicit clock management to Runtime PM.

While at it, use %pe to format error codes.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - Convert to %pe.
---
 drivers/net/can/rcar/rcar_can.c | 48 ++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 57030992141cc523..15dbaa52a7b135d9 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -16,6 +16,7 @@
 #include <linux/can/dev.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/pm_runtime.h>
 
 #define RCAR_CAN_DRV_NAME	"rcar_can"
 
@@ -92,7 +93,6 @@ struct rcar_can_priv {
 	struct net_device *ndev;
 	struct napi_struct napi;
 	struct rcar_can_regs __iomem *regs;
-	struct clk *clk;
 	struct clk *can_clk;
 	u32 tx_head;
 	u32 tx_tail;
@@ -506,18 +506,17 @@ static int rcar_can_open(struct net_device *ndev)
 	struct rcar_can_priv *priv = netdev_priv(ndev);
 	int err;
 
-	err = clk_prepare_enable(priv->clk);
+	err = pm_runtime_resume_and_get(ndev->dev.parent);
 	if (err) {
-		netdev_err(ndev,
-			   "failed to enable peripheral clock, error %d\n",
-			   err);
+		netdev_err(ndev, "pm_runtime_resume_and_get() failed %pe\n",
+			   ERR_PTR(err));
 		goto out;
 	}
 	err = clk_prepare_enable(priv->can_clk);
 	if (err) {
 		netdev_err(ndev, "failed to enable CAN clock, error %d\n",
 			   err);
-		goto out_clock;
+		goto out_rpm;
 	}
 	err = open_candev(ndev);
 	if (err) {
@@ -539,8 +538,8 @@ static int rcar_can_open(struct net_device *ndev)
 	close_candev(ndev);
 out_can_clock:
 	clk_disable_unprepare(priv->can_clk);
-out_clock:
-	clk_disable_unprepare(priv->clk);
+out_rpm:
+	pm_runtime_put(ndev->dev.parent);
 out:
 	return err;
 }
@@ -578,7 +577,7 @@ static int rcar_can_close(struct net_device *ndev)
 	free_irq(ndev->irq, ndev);
 	napi_disable(&priv->napi);
 	clk_disable_unprepare(priv->can_clk);
-	clk_disable_unprepare(priv->clk);
+	pm_runtime_put(ndev->dev.parent);
 	close_candev(ndev);
 	return 0;
 }
@@ -721,12 +720,15 @@ static int rcar_can_get_berr_counter(const struct net_device *ndev,
 	struct rcar_can_priv *priv = netdev_priv(ndev);
 	int err;
 
-	err = clk_prepare_enable(priv->clk);
+	err = pm_runtime_resume_and_get(ndev->dev.parent);
 	if (err)
 		return err;
+
 	bec->txerr = readb(&priv->regs->tecr);
 	bec->rxerr = readb(&priv->regs->recr);
-	clk_disable_unprepare(priv->clk);
+
+	pm_runtime_put(ndev->dev.parent);
+
 	return 0;
 }
 
@@ -770,13 +772,6 @@ static int rcar_can_probe(struct platform_device *pdev)
 
 	priv = netdev_priv(ndev);
 
-	priv->clk = devm_clk_get(dev, "clkp1");
-	if (IS_ERR(priv->clk)) {
-		err = PTR_ERR(priv->clk);
-		dev_err(dev, "cannot get peripheral clock, error %d\n", err);
-		goto fail_clk;
-	}
-
 	if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
 		err = -EINVAL;
 		dev_err(dev, "invalid CAN clock selected\n");
@@ -806,16 +801,20 @@ static int rcar_can_probe(struct platform_device *pdev)
 
 	netif_napi_add_weight(ndev, &priv->napi, rcar_can_rx_poll,
 			      RCAR_CAN_NAPI_WEIGHT);
+
+	pm_runtime_enable(dev);
+
 	err = register_candev(ndev);
 	if (err) {
 		dev_err(dev, "register_candev() failed, error %d\n", err);
-		goto fail_candev;
+		goto fail_rpm;
 	}
 
 	dev_info(dev, "device registered (IRQ%d)\n", ndev->irq);
 
 	return 0;
-fail_candev:
+fail_rpm:
+	pm_runtime_disable(dev);
 	netif_napi_del(&priv->napi);
 fail_clk:
 	free_candev(ndev);
@@ -829,6 +828,7 @@ static void rcar_can_remove(struct platform_device *pdev)
 	struct rcar_can_priv *priv = netdev_priv(ndev);
 
 	unregister_candev(ndev);
+	pm_runtime_disable(&pdev->dev);
 	netif_napi_del(&priv->napi);
 	free_candev(ndev);
 }
@@ -852,22 +852,22 @@ static int rcar_can_suspend(struct device *dev)
 	writew(ctlr, &priv->regs->ctlr);
 	priv->can.state = CAN_STATE_SLEEPING;
 
-	clk_disable(priv->clk);
+	pm_runtime_put(dev);
 	return 0;
 }
 
 static int rcar_can_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct rcar_can_priv *priv = netdev_priv(ndev);
 	int err;
 
 	if (!netif_running(ndev))
 		return 0;
 
-	err = clk_enable(priv->clk);
+	err = pm_runtime_resume_and_get(dev);
 	if (err) {
-		netdev_err(ndev, "clk_enable() failed, error %d\n", err);
+		netdev_err(ndev, "pm_runtime_resume_and_get() failed %pe\n",
+			   ERR_PTR(err));
 		return err;
 	}
 
-- 
2.43.0

[PATCH v2 04/11] can: rcar_can: Convert to BIT()

[Geert Uytterhoeven]

Use the BIT() macro instead of open-coding the same operation.
Add a few more comments while at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
I am not so fond of the need to add "(u8)" casts to various writeb()
calls that write an inverted bit definition, to get rid of "conversion
from ‘long unsigned int’ to ‘u8’ {aka ‘unsigned char’} changes value
from ‘<big value>’ to ‘<8-bit value>’"...

v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 139 ++++++++++++++++----------------
 1 file changed, 70 insertions(+), 69 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 15dbaa52a7b135d9..c47ee4e41eb62d9e 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2013 Renesas Solutions Corp.
  */
 
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -116,36 +117,36 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 #define RCAR_CAN_CTLR_BOM	(3 << 11) /* Bus-Off Recovery Mode Bits */
 #define RCAR_CAN_CTLR_BOM_ENT	(1 << 11) /* Entry to halt mode */
 					/* at bus-off entry */
-#define RCAR_CAN_CTLR_SLPM	(1 << 10)
+#define RCAR_CAN_CTLR_SLPM	BIT(10)		/* Sleep Mode */
 #define RCAR_CAN_CTLR_CANM	(3 << 8) /* Operating Mode Select Bit */
 #define RCAR_CAN_CTLR_CANM_HALT	(1 << 9)
 #define RCAR_CAN_CTLR_CANM_RESET (1 << 8)
 #define RCAR_CAN_CTLR_CANM_FORCE_RESET (3 << 8)
-#define RCAR_CAN_CTLR_MLM	(1 << 3) /* Message Lost Mode Select */
+#define RCAR_CAN_CTLR_MLM	BIT(3)		/* Message Lost Mode Select */
 #define RCAR_CAN_CTLR_IDFM	(3 << 1) /* ID Format Mode Select Bits */
 #define RCAR_CAN_CTLR_IDFM_MIXED (1 << 2) /* Mixed ID mode */
-#define RCAR_CAN_CTLR_MBM	(1 << 0) /* Mailbox Mode select */
+#define RCAR_CAN_CTLR_MBM	BIT(0)		/* Mailbox Mode select */
 
 /* Status Register bits */
-#define RCAR_CAN_STR_RSTST	(1 << 8) /* Reset Status Bit */
+#define RCAR_CAN_STR_RSTST	BIT(8)		/* Reset Status Bit */
 
 /* FIFO Received ID Compare Registers 0 and 1 bits */
-#define RCAR_CAN_FIDCR_IDE	(1 << 31) /* ID Extension Bit */
-#define RCAR_CAN_FIDCR_RTR	(1 << 30) /* Remote Transmission Request Bit */
+#define RCAR_CAN_FIDCR_IDE	BIT(31)		/* ID Extension Bit */
+#define RCAR_CAN_FIDCR_RTR	BIT(30)		/* Remote Transmission Request Bit */
 
 /* Receive FIFO Control Register bits */
-#define RCAR_CAN_RFCR_RFEST	(1 << 7) /* Receive FIFO Empty Status Flag */
-#define RCAR_CAN_RFCR_RFE	(1 << 0) /* Receive FIFO Enable */
+#define RCAR_CAN_RFCR_RFEST	BIT(7)		/* Receive FIFO Empty Status Flag */
+#define RCAR_CAN_RFCR_RFE	BIT(0)		/* Receive FIFO Enable */
 
 /* Transmit FIFO Control Register bits */
-#define RCAR_CAN_TFCR_TFUST	(7 << 1) /* Transmit FIFO Unsent Message */
-					/* Number Status Bits */
-#define RCAR_CAN_TFCR_TFUST_SHIFT 1	/* Offset of Transmit FIFO Unsent */
-					/* Message Number Status Bits */
-#define RCAR_CAN_TFCR_TFE	(1 << 0) /* Transmit FIFO Enable */
-
-#define RCAR_CAN_N_RX_MKREGS1	2	/* Number of mask registers */
-					/* for Rx mailboxes 0-31 */
+#define RCAR_CAN_TFCR_TFUST	(7 << 1)	/* Transmit FIFO Unsent Message */
+						/* Number Status Bits */
+#define RCAR_CAN_TFCR_TFUST_SHIFT 1		/* Offset of Transmit FIFO Unsent */
+						/* Message Number Status Bits */
+#define RCAR_CAN_TFCR_TFE	BIT(0)		/* Transmit FIFO Enable */
+
+#define RCAR_CAN_N_RX_MKREGS1	2		/* Number of mask registers */
+						/* for Rx mailboxes 0-31 */
 #define RCAR_CAN_N_RX_MKREGS2	8
 
 /* Bit Configuration Register settings */
@@ -155,58 +156,58 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 #define RCAR_CAN_BCR_TSEG2(x)	((x) & 0x07)
 
 /* Mailbox and Mask Registers bits */
-#define RCAR_CAN_IDE		(1 << 31)
-#define RCAR_CAN_RTR		(1 << 30)
+#define RCAR_CAN_IDE		BIT(31)		/* ID Extension */
+#define RCAR_CAN_RTR		BIT(30)		/* Remote Transmission Request */
 #define RCAR_CAN_SID_SHIFT	18
 
 /* Mailbox Interrupt Enable Register 1 bits */
-#define RCAR_CAN_MIER1_RXFIE	(1 << 28) /* Receive  FIFO Interrupt Enable */
-#define RCAR_CAN_MIER1_TXFIE	(1 << 24) /* Transmit FIFO Interrupt Enable */
+#define RCAR_CAN_MIER1_RXFIE	BIT(28)		/* Receive  FIFO Interrupt Enable */
+#define RCAR_CAN_MIER1_TXFIE	BIT(24)		/* Transmit FIFO Interrupt Enable */
 
 /* Interrupt Enable Register bits */
-#define RCAR_CAN_IER_ERSIE	(1 << 5) /* Error (ERS) Interrupt Enable Bit */
-#define RCAR_CAN_IER_RXFIE	(1 << 4) /* Reception FIFO Interrupt */
-					/* Enable Bit */
-#define RCAR_CAN_IER_TXFIE	(1 << 3) /* Transmission FIFO Interrupt */
-					/* Enable Bit */
+#define RCAR_CAN_IER_ERSIE	BIT(5)		/* Error (ERS) Interrupt Enable Bit */
+#define RCAR_CAN_IER_RXFIE	BIT(4)		/* Reception FIFO Interrupt */
+						/* Enable Bit */
+#define RCAR_CAN_IER_TXFIE	BIT(3)		/* Transmission FIFO Interrupt */
+						/* Enable Bit */
 /* Interrupt Status Register bits */
-#define RCAR_CAN_ISR_ERSF	(1 << 5) /* Error (ERS) Interrupt Status Bit */
-#define RCAR_CAN_ISR_RXFF	(1 << 4) /* Reception FIFO Interrupt */
-					/* Status Bit */
-#define RCAR_CAN_ISR_TXFF	(1 << 3) /* Transmission FIFO Interrupt */
-					/* Status Bit */
+#define RCAR_CAN_ISR_ERSF	BIT(5)		/* Error (ERS) Interrupt Status Bit */
+#define RCAR_CAN_ISR_RXFF	BIT(4)		/* Reception FIFO Interrupt */
+						/* Status Bit */
+#define RCAR_CAN_ISR_TXFF	BIT(3)		/* Transmission FIFO Interrupt */
+						/* Status Bit */
 
 /* Error Interrupt Enable Register bits */
-#define RCAR_CAN_EIER_BLIE	(1 << 7) /* Bus Lock Interrupt Enable */
-#define RCAR_CAN_EIER_OLIE	(1 << 6) /* Overload Frame Transmit */
-					/* Interrupt Enable */
-#define RCAR_CAN_EIER_ORIE	(1 << 5) /* Receive Overrun  Interrupt Enable */
-#define RCAR_CAN_EIER_BORIE	(1 << 4) /* Bus-Off Recovery Interrupt Enable */
-#define RCAR_CAN_EIER_BOEIE	(1 << 3) /* Bus-Off Entry Interrupt Enable */
-#define RCAR_CAN_EIER_EPIE	(1 << 2) /* Error Passive Interrupt Enable */
-#define RCAR_CAN_EIER_EWIE	(1 << 1) /* Error Warning Interrupt Enable */
-#define RCAR_CAN_EIER_BEIE	(1 << 0) /* Bus Error Interrupt Enable */
+#define RCAR_CAN_EIER_BLIE	BIT(7)		/* Bus Lock Interrupt Enable */
+#define RCAR_CAN_EIER_OLIE	BIT(6)		/* Overload Frame Transmit */
+						/* Interrupt Enable */
+#define RCAR_CAN_EIER_ORIE	BIT(5)		/* Receive Overrun  Interrupt Enable */
+#define RCAR_CAN_EIER_BORIE	BIT(4)		/* Bus-Off Recovery Interrupt Enable */
+#define RCAR_CAN_EIER_BOEIE	BIT(3)		/* Bus-Off Entry Interrupt Enable */
+#define RCAR_CAN_EIER_EPIE	BIT(2)		/* Error Passive Interrupt Enable */
+#define RCAR_CAN_EIER_EWIE	BIT(1)		/* Error Warning Interrupt Enable */
+#define RCAR_CAN_EIER_BEIE	BIT(0)		/* Bus Error Interrupt Enable */
 
 /* Error Interrupt Factor Judge Register bits */
-#define RCAR_CAN_EIFR_BLIF	(1 << 7) /* Bus Lock Detect Flag */
-#define RCAR_CAN_EIFR_OLIF	(1 << 6) /* Overload Frame Transmission */
-					 /* Detect Flag */
-#define RCAR_CAN_EIFR_ORIF	(1 << 5) /* Receive Overrun Detect Flag */
-#define RCAR_CAN_EIFR_BORIF	(1 << 4) /* Bus-Off Recovery Detect Flag */
-#define RCAR_CAN_EIFR_BOEIF	(1 << 3) /* Bus-Off Entry Detect Flag */
-#define RCAR_CAN_EIFR_EPIF	(1 << 2) /* Error Passive Detect Flag */
-#define RCAR_CAN_EIFR_EWIF	(1 << 1) /* Error Warning Detect Flag */
-#define RCAR_CAN_EIFR_BEIF	(1 << 0) /* Bus Error Detect Flag */
+#define RCAR_CAN_EIFR_BLIF	BIT(7)		/* Bus Lock Detect Flag */
+#define RCAR_CAN_EIFR_OLIF	BIT(6)		/* Overload Frame Transmission */
+						/* Detect Flag */
+#define RCAR_CAN_EIFR_ORIF	BIT(5)		/* Receive Overrun Detect Flag */
+#define RCAR_CAN_EIFR_BORIF	BIT(4)		/* Bus-Off Recovery Detect Flag */
+#define RCAR_CAN_EIFR_BOEIF	BIT(3)		/* Bus-Off Entry Detect Flag */
+#define RCAR_CAN_EIFR_EPIF	BIT(2)		/* Error Passive Detect Flag */
+#define RCAR_CAN_EIFR_EWIF	BIT(1)		/* Error Warning Detect Flag */
+#define RCAR_CAN_EIFR_BEIF	BIT(0)		/* Bus Error Detect Flag */
 
 /* Error Code Store Register bits */
-#define RCAR_CAN_ECSR_EDPM	(1 << 7) /* Error Display Mode Select Bit */
-#define RCAR_CAN_ECSR_ADEF	(1 << 6) /* ACK Delimiter Error Flag */
-#define RCAR_CAN_ECSR_BE0F	(1 << 5) /* Bit Error (dominant) Flag */
-#define RCAR_CAN_ECSR_BE1F	(1 << 4) /* Bit Error (recessive) Flag */
-#define RCAR_CAN_ECSR_CEF	(1 << 3) /* CRC Error Flag */
-#define RCAR_CAN_ECSR_AEF	(1 << 2) /* ACK Error Flag */
-#define RCAR_CAN_ECSR_FEF	(1 << 1) /* Form Error Flag */
-#define RCAR_CAN_ECSR_SEF	(1 << 0) /* Stuff Error Flag */
+#define RCAR_CAN_ECSR_EDPM	BIT(7)		/* Error Display Mode Select Bit */
+#define RCAR_CAN_ECSR_ADEF	BIT(6)		/* ACK Delimiter Error Flag */
+#define RCAR_CAN_ECSR_BE0F	BIT(5)		/* Bit Error (dominant) Flag */
+#define RCAR_CAN_ECSR_BE1F	BIT(4)		/* Bit Error (recessive) Flag */
+#define RCAR_CAN_ECSR_CEF	BIT(3)		/* CRC Error Flag */
+#define RCAR_CAN_ECSR_AEF	BIT(2)		/* ACK Error Flag */
+#define RCAR_CAN_ECSR_FEF	BIT(1)		/* Form Error Flag */
+#define RCAR_CAN_ECSR_SEF	BIT(0)		/* Stuff Error Flag */
 
 #define RCAR_CAN_NAPI_WEIGHT	4
 #define MAX_STR_READS		0x100
@@ -248,35 +249,35 @@ static void rcar_can_error(struct net_device *ndev)
 		if (ecsr & RCAR_CAN_ECSR_ADEF) {
 			netdev_dbg(priv->ndev, "ACK Delimiter Error\n");
 			tx_errors++;
-			writeb(~RCAR_CAN_ECSR_ADEF, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_ADEF, &priv->regs->ecsr);
 			if (skb)
 				cf->data[3] = CAN_ERR_PROT_LOC_ACK_DEL;
 		}
 		if (ecsr & RCAR_CAN_ECSR_BE0F) {
 			netdev_dbg(priv->ndev, "Bit Error (dominant)\n");
 			tx_errors++;
-			writeb(~RCAR_CAN_ECSR_BE0F, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_BE0F, &priv->regs->ecsr);
 			if (skb)
 				cf->data[2] |= CAN_ERR_PROT_BIT0;
 		}
 		if (ecsr & RCAR_CAN_ECSR_BE1F) {
 			netdev_dbg(priv->ndev, "Bit Error (recessive)\n");
 			tx_errors++;
-			writeb(~RCAR_CAN_ECSR_BE1F, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_BE1F, &priv->regs->ecsr);
 			if (skb)
 				cf->data[2] |= CAN_ERR_PROT_BIT1;
 		}
 		if (ecsr & RCAR_CAN_ECSR_CEF) {
 			netdev_dbg(priv->ndev, "CRC Error\n");
 			rx_errors++;
-			writeb(~RCAR_CAN_ECSR_CEF, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_CEF, &priv->regs->ecsr);
 			if (skb)
 				cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
 		}
 		if (ecsr & RCAR_CAN_ECSR_AEF) {
 			netdev_dbg(priv->ndev, "ACK Error\n");
 			tx_errors++;
-			writeb(~RCAR_CAN_ECSR_AEF, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_AEF, &priv->regs->ecsr);
 			if (skb) {
 				cf->can_id |= CAN_ERR_ACK;
 				cf->data[3] = CAN_ERR_PROT_LOC_ACK;
@@ -285,14 +286,14 @@ static void rcar_can_error(struct net_device *ndev)
 		if (ecsr & RCAR_CAN_ECSR_FEF) {
 			netdev_dbg(priv->ndev, "Form Error\n");
 			rx_errors++;
-			writeb(~RCAR_CAN_ECSR_FEF, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_FEF, &priv->regs->ecsr);
 			if (skb)
 				cf->data[2] |= CAN_ERR_PROT_FORM;
 		}
 		if (ecsr & RCAR_CAN_ECSR_SEF) {
 			netdev_dbg(priv->ndev, "Stuff Error\n");
 			rx_errors++;
-			writeb(~RCAR_CAN_ECSR_SEF, &priv->regs->ecsr);
+			writeb((u8)~RCAR_CAN_ECSR_SEF, &priv->regs->ecsr);
 			if (skb)
 				cf->data[2] |= CAN_ERR_PROT_STUFF;
 		}
@@ -300,14 +301,14 @@ static void rcar_can_error(struct net_device *ndev)
 		priv->can.can_stats.bus_error++;
 		ndev->stats.rx_errors += rx_errors;
 		ndev->stats.tx_errors += tx_errors;
-		writeb(~RCAR_CAN_EIFR_BEIF, &priv->regs->eifr);
+		writeb((u8)~RCAR_CAN_EIFR_BEIF, &priv->regs->eifr);
 	}
 	if (eifr & RCAR_CAN_EIFR_EWIF) {
 		netdev_dbg(priv->ndev, "Error warning interrupt\n");
 		priv->can.state = CAN_STATE_ERROR_WARNING;
 		priv->can.can_stats.error_warning++;
 		/* Clear interrupt condition */
-		writeb(~RCAR_CAN_EIFR_EWIF, &priv->regs->eifr);
+		writeb((u8)~RCAR_CAN_EIFR_EWIF, &priv->regs->eifr);
 		if (skb)
 			cf->data[1] = txerr > rxerr ? CAN_ERR_CRTL_TX_WARNING :
 					      CAN_ERR_CRTL_RX_WARNING;
@@ -317,7 +318,7 @@ static void rcar_can_error(struct net_device *ndev)
 		priv->can.state = CAN_STATE_ERROR_PASSIVE;
 		priv->can.can_stats.error_passive++;
 		/* Clear interrupt condition */
-		writeb(~RCAR_CAN_EIFR_EPIF, &priv->regs->eifr);
+		writeb((u8)~RCAR_CAN_EIFR_EPIF, &priv->regs->eifr);
 		if (skb)
 			cf->data[1] = txerr > rxerr ? CAN_ERR_CRTL_TX_PASSIVE :
 					      CAN_ERR_CRTL_RX_PASSIVE;
@@ -329,7 +330,7 @@ static void rcar_can_error(struct net_device *ndev)
 		writeb(priv->ier, &priv->regs->ier);
 		priv->can.state = CAN_STATE_BUS_OFF;
 		/* Clear interrupt condition */
-		writeb(~RCAR_CAN_EIFR_BOEIF, &priv->regs->eifr);
+		writeb((u8)~RCAR_CAN_EIFR_BOEIF, &priv->regs->eifr);
 		priv->can.can_stats.bus_off++;
 		can_bus_off(ndev);
 		if (skb)
@@ -343,7 +344,7 @@ static void rcar_can_error(struct net_device *ndev)
 		netdev_dbg(priv->ndev, "Receive overrun error interrupt\n");
 		ndev->stats.rx_over_errors++;
 		ndev->stats.rx_errors++;
-		writeb(~RCAR_CAN_EIFR_ORIF, &priv->regs->eifr);
+		writeb((u8)~RCAR_CAN_EIFR_ORIF, &priv->regs->eifr);
 		if (skb) {
 			cf->can_id |= CAN_ERR_CRTL;
 			cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
@@ -354,7 +355,7 @@ static void rcar_can_error(struct net_device *ndev)
 			   "Overload Frame Transmission error interrupt\n");
 		ndev->stats.rx_over_errors++;
 		ndev->stats.rx_errors++;
-		writeb(~RCAR_CAN_EIFR_OLIF, &priv->regs->eifr);
+		writeb((u8)~RCAR_CAN_EIFR_OLIF, &priv->regs->eifr);
 		if (skb) {
 			cf->can_id |= CAN_ERR_PROT;
 			cf->data[2] |= CAN_ERR_PROT_OVERLOAD;
-- 
2.43.0

[PATCH v2 05/11] can: rcar_can: Convert to GENMASK()

[Geert Uytterhoeven]

Use the GENMASK() macro instead of open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index c47ee4e41eb62d9e..7b94224bbc9b36fa 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -114,16 +114,16 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 };
 
 /* Control Register bits */
-#define RCAR_CAN_CTLR_BOM	(3 << 11) /* Bus-Off Recovery Mode Bits */
+#define RCAR_CAN_CTLR_BOM	GENMASK(12, 11)	/* Bus-Off Recovery Mode Bits */
 #define RCAR_CAN_CTLR_BOM_ENT	(1 << 11) /* Entry to halt mode */
 					/* at bus-off entry */
 #define RCAR_CAN_CTLR_SLPM	BIT(10)		/* Sleep Mode */
-#define RCAR_CAN_CTLR_CANM	(3 << 8) /* Operating Mode Select Bit */
+#define RCAR_CAN_CTLR_CANM	GENMASK(9, 8)	/* Operating Mode Select Bit */
 #define RCAR_CAN_CTLR_CANM_HALT	(1 << 9)
 #define RCAR_CAN_CTLR_CANM_RESET (1 << 8)
 #define RCAR_CAN_CTLR_CANM_FORCE_RESET (3 << 8)
 #define RCAR_CAN_CTLR_MLM	BIT(3)		/* Message Lost Mode Select */
-#define RCAR_CAN_CTLR_IDFM	(3 << 1) /* ID Format Mode Select Bits */
+#define RCAR_CAN_CTLR_IDFM	GENMASK(2, 1)	/* ID Format Mode Select Bits */
 #define RCAR_CAN_CTLR_IDFM_MIXED (1 << 2) /* Mixed ID mode */
 #define RCAR_CAN_CTLR_MBM	BIT(0)		/* Mailbox Mode select */
 
@@ -139,7 +139,7 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 #define RCAR_CAN_RFCR_RFE	BIT(0)		/* Receive FIFO Enable */
 
 /* Transmit FIFO Control Register bits */
-#define RCAR_CAN_TFCR_TFUST	(7 << 1)	/* Transmit FIFO Unsent Message */
+#define RCAR_CAN_TFCR_TFUST	GENMASK(3, 1)	/* Transmit FIFO Unsent Message */
 						/* Number Status Bits */
 #define RCAR_CAN_TFCR_TFUST_SHIFT 1		/* Offset of Transmit FIFO Unsent */
 						/* Message Number Status Bits */
-- 
2.43.0

[PATCH v2 06/11] can: rcar_can: CTLR bitfield conversion

[Geert Uytterhoeven]

Convert CAN Control Register field accesses to use the FIELD_PREP()
bitfield access macro.  Add a few more comments and definitions while at
it.

This gets rid of explicit (and sometimes confusing) shifts.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 7b94224bbc9b36fa..8b4356fcd7d2fddb 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2013 Renesas Solutions Corp.
  */
 
+#include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -115,16 +116,19 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 
 /* Control Register bits */
 #define RCAR_CAN_CTLR_BOM	GENMASK(12, 11)	/* Bus-Off Recovery Mode Bits */
-#define RCAR_CAN_CTLR_BOM_ENT	(1 << 11) /* Entry to halt mode */
-					/* at bus-off entry */
+#define RCAR_CAN_CTLR_BOM_ENT		1	/* Entry to halt mode */
+						/* at bus-off entry */
 #define RCAR_CAN_CTLR_SLPM	BIT(10)		/* Sleep Mode */
 #define RCAR_CAN_CTLR_CANM	GENMASK(9, 8)	/* Operating Mode Select Bit */
-#define RCAR_CAN_CTLR_CANM_HALT	(1 << 9)
-#define RCAR_CAN_CTLR_CANM_RESET (1 << 8)
-#define RCAR_CAN_CTLR_CANM_FORCE_RESET (3 << 8)
+#define RCAR_CAN_CTLR_CANM_OPER		0	/* Operation Mode */
+#define RCAR_CAN_CTLR_CANM_RESET	1	/* Reset Mode */
+#define RCAR_CAN_CTLR_CANM_HALT		2	/* Halt Mode */
+#define RCAR_CAN_CTLR_CANM_FORCE_RESET	3	/* Reset Mode (forcible) */
 #define RCAR_CAN_CTLR_MLM	BIT(3)		/* Message Lost Mode Select */
 #define RCAR_CAN_CTLR_IDFM	GENMASK(2, 1)	/* ID Format Mode Select Bits */
-#define RCAR_CAN_CTLR_IDFM_MIXED (1 << 2) /* Mixed ID mode */
+#define RCAR_CAN_CTLR_IDFM_STD		0	/* Standard ID mode */
+#define RCAR_CAN_CTLR_IDFM_EXT		1	/* Extended ID mode */
+#define RCAR_CAN_CTLR_IDFM_MIXED	2	/* Mixed ID mode */
 #define RCAR_CAN_CTLR_MBM	BIT(0)		/* Mailbox Mode select */
 
 /* Status Register bits */
@@ -453,16 +457,17 @@ static void rcar_can_start(struct net_device *ndev)
 	ctlr &= ~RCAR_CAN_CTLR_SLPM;
 	writew(ctlr, &priv->regs->ctlr);
 	/* Go to reset mode */
-	ctlr |= RCAR_CAN_CTLR_CANM_FORCE_RESET;
+	ctlr |= FIELD_PREP(RCAR_CAN_CTLR_CANM, RCAR_CAN_CTLR_CANM_FORCE_RESET);
 	writew(ctlr, &priv->regs->ctlr);
 	for (i = 0; i < MAX_STR_READS; i++) {
 		if (readw(&priv->regs->str) & RCAR_CAN_STR_RSTST)
 			break;
 	}
 	rcar_can_set_bittiming(ndev);
-	ctlr |= RCAR_CAN_CTLR_IDFM_MIXED; /* Select mixed ID mode */
-	ctlr |= RCAR_CAN_CTLR_BOM_ENT;	/* Entry to halt mode automatically */
-					/* at bus-off */
+	/* Select mixed ID mode */
+	ctlr |= FIELD_PREP(RCAR_CAN_CTLR_IDFM, RCAR_CAN_CTLR_IDFM_MIXED);
+	/* Entry to halt mode automatically at bus-off */
+	ctlr |= FIELD_PREP(RCAR_CAN_CTLR_BOM, RCAR_CAN_CTLR_BOM_ENT);
 	ctlr |= RCAR_CAN_CTLR_MBM;	/* Select FIFO mailbox mode */
 	ctlr |= RCAR_CAN_CTLR_MLM;	/* Overrun mode */
 	writew(ctlr, &priv->regs->ctlr);
@@ -492,7 +497,9 @@ static void rcar_can_start(struct net_device *ndev)
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
 	/* Go to operation mode */
-	writew(ctlr & ~RCAR_CAN_CTLR_CANM, &priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_CANM;
+	ctlr |= FIELD_PREP(RCAR_CAN_CTLR_CANM, RCAR_CAN_CTLR_CANM_OPER);
+	writew(ctlr, &priv->regs->ctlr);
 	for (i = 0; i < MAX_STR_READS; i++) {
 		if (!(readw(&priv->regs->str) & RCAR_CAN_STR_RSTST))
 			break;
@@ -553,7 +560,7 @@ static void rcar_can_stop(struct net_device *ndev)
 
 	/* Go to (force) reset mode */
 	ctlr = readw(&priv->regs->ctlr);
-	ctlr |= RCAR_CAN_CTLR_CANM_FORCE_RESET;
+	ctlr |= FIELD_PREP(RCAR_CAN_CTLR_CANM, RCAR_CAN_CTLR_CANM_FORCE_RESET);
 	writew(ctlr, &priv->regs->ctlr);
 	for (i = 0; i < MAX_STR_READS; i++) {
 		if (readw(&priv->regs->str) & RCAR_CAN_STR_RSTST)
@@ -847,7 +854,7 @@ static int rcar_can_suspend(struct device *dev)
 	netif_device_detach(ndev);
 
 	ctlr = readw(&priv->regs->ctlr);
-	ctlr |= RCAR_CAN_CTLR_CANM_HALT;
+	ctlr |= FIELD_PREP(RCAR_CAN_CTLR_CANM, RCAR_CAN_CTLR_CANM_HALT);
 	writew(ctlr, &priv->regs->ctlr);
 	ctlr |= RCAR_CAN_CTLR_SLPM;
 	writew(ctlr, &priv->regs->ctlr);
-- 
2.43.0

[PATCH v2 07/11] can: rcar_can: TFCR bitfield conversion

[Geert Uytterhoeven]

Convert CAN Transmit FIFO Control Register field accesses to use the
FIELD_GET() bitfield access macro.

This gets rid of an explicit shift.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 8b4356fcd7d2fddb..6f28dc9354511120 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -145,8 +145,6 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 /* Transmit FIFO Control Register bits */
 #define RCAR_CAN_TFCR_TFUST	GENMASK(3, 1)	/* Transmit FIFO Unsent Message */
 						/* Number Status Bits */
-#define RCAR_CAN_TFCR_TFUST_SHIFT 1		/* Offset of Transmit FIFO Unsent */
-						/* Message Number Status Bits */
 #define RCAR_CAN_TFCR_TFE	BIT(0)		/* Transmit FIFO Enable */
 
 #define RCAR_CAN_N_RX_MKREGS1	2		/* Number of mask registers */
@@ -377,10 +375,9 @@ static void rcar_can_tx_done(struct net_device *ndev)
 	u8 isr;
 
 	while (1) {
-		u8 unsent = readb(&priv->regs->tfcr);
+		u8 unsent = FIELD_GET(RCAR_CAN_TFCR_TFUST,
+			    readb(&priv->regs->tfcr));
 
-		unsent = (unsent & RCAR_CAN_TFCR_TFUST) >>
-			  RCAR_CAN_TFCR_TFUST_SHIFT;
 		if (priv->tx_head - priv->tx_tail <= unsent)
 			break;
 		stats->tx_packets++;
-- 
2.43.0

[PATCH v2 08/11] can: rcar_can: BCR bitfield conversion

[Geert Uytterhoeven]

Convert CAN Bit Configuration Register field accesses to use the
FIELD_PREP() bitfield access macro.  While at it, fix the misspelling of
BRP.

This gets rid of custom function-like field preparation macros.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 6f28dc9354511120..4c5c1f0446913d37 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -152,10 +152,10 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 #define RCAR_CAN_N_RX_MKREGS2	8
 
 /* Bit Configuration Register settings */
-#define RCAR_CAN_BCR_TSEG1(x)	(((x) & 0x0f) << 20)
-#define RCAR_CAN_BCR_BPR(x)	(((x) & 0x3ff) << 8)
-#define RCAR_CAN_BCR_SJW(x)	(((x) & 0x3) << 4)
-#define RCAR_CAN_BCR_TSEG2(x)	((x) & 0x07)
+#define RCAR_CAN_BCR_TSEG1	GENMASK(23, 20)
+#define RCAR_CAN_BCR_BRP	GENMASK(17, 8)
+#define RCAR_CAN_BCR_SJW	GENMASK(5, 4)
+#define RCAR_CAN_BCR_TSEG2	GENMASK(2, 0)
 
 /* Mailbox and Mask Registers bits */
 #define RCAR_CAN_IDE		BIT(31)		/* ID Extension */
@@ -428,9 +428,10 @@ static void rcar_can_set_bittiming(struct net_device *ndev)
 	struct can_bittiming *bt = &priv->can.bittiming;
 	u32 bcr;
 
-	bcr = RCAR_CAN_BCR_TSEG1(bt->phase_seg1 + bt->prop_seg - 1) |
-	      RCAR_CAN_BCR_BPR(bt->brp - 1) | RCAR_CAN_BCR_SJW(bt->sjw - 1) |
-	      RCAR_CAN_BCR_TSEG2(bt->phase_seg2 - 1);
+	bcr = FIELD_PREP(RCAR_CAN_BCR_TSEG1, bt->phase_seg1 + bt->prop_seg - 1) |
+	      FIELD_PREP(RCAR_CAN_BCR_BRP, bt->brp - 1) |
+	      FIELD_PREP(RCAR_CAN_BCR_SJW, bt->sjw - 1) |
+	      FIELD_PREP(RCAR_CAN_BCR_TSEG2, bt->phase_seg2 - 1);
 	/* Don't overwrite CLKR with 32-bit BCR access; CLKR has 8-bit access.
 	 * All the registers are big-endian but they get byte-swapped on 32-bit
 	 * read/write (but not on 8-bit, contrary to the manuals)...
-- 
2.43.0

[PATCH v2 09/11] can: rcar_can: Mailbox bitfield conversion

[Geert Uytterhoeven]

Convert CAN Mailbox Register field accesses to use the FIELD_PREP() and
FIELD_GET() bitfield access macro.

This gets rid of explicit shifts, and keeps a clear separation between
hardware register layouts and offical CAN definitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 drivers/net/can/rcar/rcar_can.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 4c5c1f0446913d37..de1829477659757c 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -160,7 +160,8 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
 /* Mailbox and Mask Registers bits */
 #define RCAR_CAN_IDE		BIT(31)		/* ID Extension */
 #define RCAR_CAN_RTR		BIT(30)		/* Remote Transmission Request */
-#define RCAR_CAN_SID_SHIFT	18
+#define RCAR_CAN_SID		GENMASK(28, 18)	/* Standard ID */
+#define RCAR_CAN_EID		GENMASK(28, 0)	/* Extended ID */
 
 /* Mailbox Interrupt Enable Register 1 bits */
 #define RCAR_CAN_MIER1_RXFIE	BIT(28)		/* Receive  FIFO Interrupt Enable */
@@ -599,9 +600,10 @@ static netdev_tx_t rcar_can_start_xmit(struct sk_buff *skb,
 		return NETDEV_TX_OK;
 
 	if (cf->can_id & CAN_EFF_FLAG)	/* Extended frame format */
-		data = (cf->can_id & CAN_EFF_MASK) | RCAR_CAN_IDE;
+		data = FIELD_PREP(RCAR_CAN_EID, cf->can_id & CAN_EFF_MASK) |
+		       RCAR_CAN_IDE;
 	else				/* Standard frame format */
-		data = (cf->can_id & CAN_SFF_MASK) << RCAR_CAN_SID_SHIFT;
+		data = FIELD_PREP(RCAR_CAN_SID, cf->can_id & CAN_SFF_MASK);
 
 	if (cf->can_id & CAN_RTR_FLAG) { /* Remote transmission request */
 		data |= RCAR_CAN_RTR;
@@ -656,9 +658,9 @@ static void rcar_can_rx_pkt(struct rcar_can_priv *priv)
 
 	data = readl(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].id);
 	if (data & RCAR_CAN_IDE)
-		cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG;
+		cf->can_id = FIELD_GET(RCAR_CAN_EID, data) | CAN_EFF_FLAG;
 	else
-		cf->can_id = (data >> RCAR_CAN_SID_SHIFT) & CAN_SFF_MASK;
+		cf->can_id = FIELD_GET(RCAR_CAN_SID, data);
 
 	dlc = readb(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].dlc);
 	cf->len = can_cc_dlc2len(dlc);
-- 
2.43.0

[PATCH v2 10/11] can: rcar_can: Do not print alloc_candev() failures

[Geert Uytterhoeven]

If alloc_candev() failed due to out-of-memory, the core memory
allocation code has already printed an error message.
If alloc_candev() failed for a different reason, alloc_netdev_mqs() has
already printed an error message.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - New.
---
 drivers/net/can/rcar/rcar_can.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index de1829477659757c..51bf8f7e71824ac8 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -773,7 +773,6 @@ static int rcar_can_probe(struct platform_device *pdev)
 
 	ndev = alloc_candev(sizeof(struct rcar_can_priv), RCAR_CAN_FIFO_DEPTH);
 	if (!ndev) {
-		dev_err(dev, "alloc_candev() failed\n");
 		err = -ENOMEM;
 		goto fail;
 	}
-- 
2.43.0

[PATCH v2 11/11] can: rcar_can: Convert to %pe

[Geert Uytterhoeven]

Replace numerical error codes by mnemotechnic error codes, to improve
the user experience in case of errors.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - New.
---
 drivers/net/can/rcar/rcar_can.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 51bf8f7e71824ac8..5f85f4e272054789 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -521,20 +521,20 @@ static int rcar_can_open(struct net_device *ndev)
 	}
 	err = clk_prepare_enable(priv->can_clk);
 	if (err) {
-		netdev_err(ndev, "failed to enable CAN clock, error %d\n",
-			   err);
+		netdev_err(ndev, "failed to enable CAN clock: %pe\n",
+			   ERR_PTR(err));
 		goto out_rpm;
 	}
 	err = open_candev(ndev);
 	if (err) {
-		netdev_err(ndev, "open_candev() failed, error %d\n", err);
+		netdev_err(ndev, "open_candev() failed %pe\n", ERR_PTR(err));
 		goto out_can_clock;
 	}
 	napi_enable(&priv->napi);
 	err = request_irq(ndev->irq, rcar_can_interrupt, 0, ndev->name, ndev);
 	if (err) {
-		netdev_err(ndev, "request_irq(%d) failed, error %d\n",
-			   ndev->irq, err);
+		netdev_err(ndev, "request_irq(%d) failed %pe\n", ndev->irq,
+			   ERR_PTR(err));
 		goto out_close;
 	}
 	rcar_can_start(ndev);
@@ -786,8 +786,8 @@ static int rcar_can_probe(struct platform_device *pdev)
 	}
 	priv->can_clk = devm_clk_get(dev, clock_names[clock_select]);
 	if (IS_ERR(priv->can_clk)) {
+		dev_err(dev, "cannot get CAN clock: %pe\n", priv->can_clk);
 		err = PTR_ERR(priv->can_clk);
-		dev_err(dev, "cannot get CAN clock, error %d\n", err);
 		goto fail_clk;
 	}
 
@@ -813,7 +813,7 @@ static int rcar_can_probe(struct platform_device *pdev)
 
 	err = register_candev(ndev);
 	if (err) {
-		dev_err(dev, "register_candev() failed, error %d\n", err);
+		dev_err(dev, "register_candev() failed %pe\n", ERR_PTR(err));
 		goto fail_rpm;
 	}
 
-- 
2.43.0

RE: [PATCH v2 01/11] can: rcar_can: Consistently use ndev for net_device pointers

[Biju Das]

Hi Geert,

Thanks for the patch.

> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Sent: 22 August 2025 11:17
> Subject: [PATCH v2 01/11] can: rcar_can: Consistently use ndev for net_device pointers
> 
> Most net_device pointers are named "ndev", but some are called "dev".
> Increase uniformity by always using "ndev".
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Cheers,
Biju

RE: [PATCH v2 02/11] can: rcar_can: Add helper variable dev to rcar_can_probe()

[Biju Das]

Hi Geert,

Thanks for the patch.

> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Sent: 22 August 2025 11:17
> To: Marc Kleine-Budde <mkl@pengutronix.de>; Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> Cc: linux-can@vger.kernel.org; linux-renesas-soc@vger.kernel.org; Geert Uytterhoeven
> <geert+renesas@glider.be>
> Subject: [PATCH v2 02/11] can: rcar_can: Add helper variable dev to rcar_can_probe()
> 
> rcar_can_probe() has many users of "pdev->dev".  Introduce a shorthand to simplify the code.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Cheers,
Biju

> ---
> v2:
>   - No changes.
> ---
>  drivers/net/can/rcar/rcar_can.c | 23 +++++++++++------------
>  1 file changed, 11 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index
> 5b0b495d127cdcb3..57030992141cc523 100644
> --- a/drivers/net/can/rcar/rcar_can.c
> +++ b/drivers/net/can/rcar/rcar_can.c
> @@ -738,6 +738,7 @@ static const char * const clock_names[] = {
> 
>  static int rcar_can_probe(struct platform_device *pdev)  {
> +	struct device *dev = &pdev->dev;
>  	struct rcar_can_priv *priv;
>  	struct net_device *ndev;
>  	void __iomem *addr;
> @@ -745,7 +746,7 @@ static int rcar_can_probe(struct platform_device *pdev)
>  	int err = -ENODEV;
>  	int irq;
> 
> -	of_property_read_u32(pdev->dev.of_node, "renesas,can-clock-select",
> +	of_property_read_u32(dev->of_node, "renesas,can-clock-select",
>  			     &clock_select);
> 
>  	irq = platform_get_irq(pdev, 0);
> @@ -762,30 +763,29 @@ static int rcar_can_probe(struct platform_device *pdev)
> 
>  	ndev = alloc_candev(sizeof(struct rcar_can_priv), RCAR_CAN_FIFO_DEPTH);
>  	if (!ndev) {
> -		dev_err(&pdev->dev, "alloc_candev() failed\n");
> +		dev_err(dev, "alloc_candev() failed\n");
>  		err = -ENOMEM;
>  		goto fail;
>  	}
> 
>  	priv = netdev_priv(ndev);
> 
> -	priv->clk = devm_clk_get(&pdev->dev, "clkp1");
> +	priv->clk = devm_clk_get(dev, "clkp1");
>  	if (IS_ERR(priv->clk)) {
>  		err = PTR_ERR(priv->clk);
> -		dev_err(&pdev->dev, "cannot get peripheral clock, error %d\n",
> -			err);
> +		dev_err(dev, "cannot get peripheral clock, error %d\n", err);
>  		goto fail_clk;
>  	}
> 
>  	if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
>  		err = -EINVAL;
> -		dev_err(&pdev->dev, "invalid CAN clock selected\n");
> +		dev_err(dev, "invalid CAN clock selected\n");
>  		goto fail_clk;
>  	}
> -	priv->can_clk = devm_clk_get(&pdev->dev, clock_names[clock_select]);
> +	priv->can_clk = devm_clk_get(dev, clock_names[clock_select]);
>  	if (IS_ERR(priv->can_clk)) {
>  		err = PTR_ERR(priv->can_clk);
> -		dev_err(&pdev->dev, "cannot get CAN clock, error %d\n", err);
> +		dev_err(dev, "cannot get CAN clock, error %d\n", err);
>  		goto fail_clk;
>  	}
> 
> @@ -802,18 +802,17 @@ static int rcar_can_probe(struct platform_device *pdev)
>  	priv->can.do_get_berr_counter = rcar_can_get_berr_counter;
>  	priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING;
>  	platform_set_drvdata(pdev, ndev);
> -	SET_NETDEV_DEV(ndev, &pdev->dev);
> +	SET_NETDEV_DEV(ndev, dev);
> 
>  	netif_napi_add_weight(ndev, &priv->napi, rcar_can_rx_poll,
>  			      RCAR_CAN_NAPI_WEIGHT);
>  	err = register_candev(ndev);
>  	if (err) {
> -		dev_err(&pdev->dev, "register_candev() failed, error %d\n",
> -			err);
> +		dev_err(dev, "register_candev() failed, error %d\n", err);
>  		goto fail_candev;
>  	}
> 
> -	dev_info(&pdev->dev, "device registered (IRQ%d)\n", ndev->irq);
> +	dev_info(dev, "device registered (IRQ%d)\n", ndev->irq);
> 
>  	return 0;
>  fail_candev:
> --
> 2.43.0
> 

RE: [PATCH v2 08/11] can: rcar_can: BCR bitfield conversion

[Biju Das]

Hi Geert,

Thanks for the patch.

> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Sent: 22 August 2025 11:17
> To: Marc Kleine-Budde <mkl@pengutronix.de>; Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> Cc: linux-can@vger.kernel.org; linux-renesas-soc@vger.kernel.org; Geert Uytterhoeven
> <geert+renesas@glider.be>
> Subject: [PATCH v2 08/11] can: rcar_can: BCR bitfield conversion
> 
> Convert CAN Bit Configuration Register field accesses to use the
> FIELD_PREP() bitfield access macro.  While at it, fix the misspelling of BRP.
> 
> This gets rid of custom function-like field preparation macros.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Cheers,
Biju

> ---
> v2:
>   - No changes.
> ---
>  drivers/net/can/rcar/rcar_can.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index
> 6f28dc9354511120..4c5c1f0446913d37 100644
> --- a/drivers/net/can/rcar/rcar_can.c
> +++ b/drivers/net/can/rcar/rcar_can.c
> @@ -152,10 +152,10 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
>  #define RCAR_CAN_N_RX_MKREGS2	8
> 
>  /* Bit Configuration Register settings */
> -#define RCAR_CAN_BCR_TSEG1(x)	(((x) & 0x0f) << 20)
> -#define RCAR_CAN_BCR_BPR(x)	(((x) & 0x3ff) << 8)
> -#define RCAR_CAN_BCR_SJW(x)	(((x) & 0x3) << 4)
> -#define RCAR_CAN_BCR_TSEG2(x)	((x) & 0x07)
> +#define RCAR_CAN_BCR_TSEG1	GENMASK(23, 20)
> +#define RCAR_CAN_BCR_BRP	GENMASK(17, 8)
> +#define RCAR_CAN_BCR_SJW	GENMASK(5, 4)
> +#define RCAR_CAN_BCR_TSEG2	GENMASK(2, 0)
> 
>  /* Mailbox and Mask Registers bits */
>  #define RCAR_CAN_IDE		BIT(31)		/* ID Extension */
> @@ -428,9 +428,10 @@ static void rcar_can_set_bittiming(struct net_device *ndev)
>  	struct can_bittiming *bt = &priv->can.bittiming;
>  	u32 bcr;
> 
> -	bcr = RCAR_CAN_BCR_TSEG1(bt->phase_seg1 + bt->prop_seg - 1) |
> -	      RCAR_CAN_BCR_BPR(bt->brp - 1) | RCAR_CAN_BCR_SJW(bt->sjw - 1) |
> -	      RCAR_CAN_BCR_TSEG2(bt->phase_seg2 - 1);
> +	bcr = FIELD_PREP(RCAR_CAN_BCR_TSEG1, bt->phase_seg1 + bt->prop_seg - 1) |
> +	      FIELD_PREP(RCAR_CAN_BCR_BRP, bt->brp - 1) |
> +	      FIELD_PREP(RCAR_CAN_BCR_SJW, bt->sjw - 1) |
> +	      FIELD_PREP(RCAR_CAN_BCR_TSEG2, bt->phase_seg2 - 1);
>  	/* Don't overwrite CLKR with 32-bit BCR access; CLKR has 8-bit access.
>  	 * All the registers are big-endian but they get byte-swapped on 32-bit
>  	 * read/write (but not on 8-bit, contrary to the manuals)...
> --
> 2.43.0
> 

RE: [PATCH v2 10/11] can: rcar_can: Do not print alloc_candev() failures

[Biju Das]

Hi Geert,

Thanks for the patch.

> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Sent: 22 August 2025 11:17
> Subject: [PATCH v2 10/11] can: rcar_can: Do not print alloc_candev() failures
> 
> If alloc_candev() failed due to out-of-memory, the core memory allocation code has already printed an
> error message.
> If alloc_candev() failed for a different reason, alloc_netdev_mqs() has already printed an error
> message.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Cheers,
Biju

> ---
> v2:
>   - New.
> ---
>  drivers/net/can/rcar/rcar_can.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index
> de1829477659757c..51bf8f7e71824ac8 100644
> --- a/drivers/net/can/rcar/rcar_can.c
> +++ b/drivers/net/can/rcar/rcar_can.c
> @@ -773,7 +773,6 @@ static int rcar_can_probe(struct platform_device *pdev)
> 
>  	ndev = alloc_candev(sizeof(struct rcar_can_priv), RCAR_CAN_FIFO_DEPTH);
>  	if (!ndev) {
> -		dev_err(dev, "alloc_candev() failed\n");
>  		err = -ENOMEM;
>  		goto fail;
>  	}
> --
> 2.43.0
> 

RE: [PATCH v2 11/11] can: rcar_can: Convert to %pe

[Biju Das]

Hi Geert,

Thanks for the patch.

> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Sent: 22 August 2025 11:17
> Subject: [PATCH v2 11/11] can: rcar_can: Convert to %pe
> 
> Replace numerical error codes by mnemotechnic error codes, to improve the user experience in case of
> errors.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Cheers,
Biju

> ---
> v2:
>   - New.
> ---
>  drivers/net/can/rcar/rcar_can.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index
> 51bf8f7e71824ac8..5f85f4e272054789 100644
> --- a/drivers/net/can/rcar/rcar_can.c
> +++ b/drivers/net/can/rcar/rcar_can.c
> @@ -521,20 +521,20 @@ static int rcar_can_open(struct net_device *ndev)
>  	}
>  	err = clk_prepare_enable(priv->can_clk);
>  	if (err) {
> -		netdev_err(ndev, "failed to enable CAN clock, error %d\n",
> -			   err);
> +		netdev_err(ndev, "failed to enable CAN clock: %pe\n",
> +			   ERR_PTR(err));
>  		goto out_rpm;
>  	}
>  	err = open_candev(ndev);
>  	if (err) {
> -		netdev_err(ndev, "open_candev() failed, error %d\n", err);
> +		netdev_err(ndev, "open_candev() failed %pe\n", ERR_PTR(err));
>  		goto out_can_clock;
>  	}
>  	napi_enable(&priv->napi);
>  	err = request_irq(ndev->irq, rcar_can_interrupt, 0, ndev->name, ndev);
>  	if (err) {
> -		netdev_err(ndev, "request_irq(%d) failed, error %d\n",
> -			   ndev->irq, err);
> +		netdev_err(ndev, "request_irq(%d) failed %pe\n", ndev->irq,
> +			   ERR_PTR(err));
>  		goto out_close;
>  	}
>  	rcar_can_start(ndev);
> @@ -786,8 +786,8 @@ static int rcar_can_probe(struct platform_device *pdev)
>  	}
>  	priv->can_clk = devm_clk_get(dev, clock_names[clock_select]);
>  	if (IS_ERR(priv->can_clk)) {
> +		dev_err(dev, "cannot get CAN clock: %pe\n", priv->can_clk);
>  		err = PTR_ERR(priv->can_clk);
> -		dev_err(dev, "cannot get CAN clock, error %d\n", err);
>  		goto fail_clk;
>  	}
> 
> @@ -813,7 +813,7 @@ static int rcar_can_probe(struct platform_device *pdev)
> 
>  	err = register_candev(ndev);
>  	if (err) {
> -		dev_err(dev, "register_candev() failed, error %d\n", err);
> +		dev_err(dev, "register_candev() failed %pe\n", ERR_PTR(err));
>  		goto fail_rpm;
>  	}
> 
> --
> 2.43.0
>