From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
geert+renesas@glider.be, magnus.damm@gmail.com,
yoshihiro.shimoda.uh@renesas.com, biju.das.jz@bp.renesas.com,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
Date: Thu, 28 Aug 2025 21:51:46 +0300 [thread overview]
Message-ID: <ae53d367-2ee5-49aa-82ba-86f9e84d4d25@tuxon.dev> (raw)
In-Reply-To: <aLAZprjeKtk4pusw@shikoro>
Hi, Wolfram,
On 8/28/25 11:56, Wolfram Sang wrote:
> Hi Claudiu,
>
>> Series adds initial USB support for the Renesas RZ/G3S SoC.
>>
>> Series is split as follows:
>> - patches 1-2/7 - fixes on bindings and driver for USB PHY
>> - patches 3-5/7 - updates the rzg2l-usbphy-ctrl driver and documentation
>> with support for setting PWRRDY though SYSC
>> - patches 6-7/7 - add device tree support
>
> Can you kindly send me a working config (privately will do). I think I
> enabled all the necessary config options but still get:
>
> [ 0.271024] rzg2l_usbphy_ctrl 11e00000.usbphy-ctrl: probe with driver rzg2l_usbphy_ctrl failed with error -22
> ...
> [ 10.981612] platform 11e20000.usb: deferred probe pending: platform: supplier 11e10200.usb-phy not ready
> [ 10.984103] platform 11e10200.usb-phy: deferred probe pending: platform: wait for supplier /soc/usbphy-ctrl@11e00000/regulator-vbus
I just checked it on latest linux-next and all good on my side. Would it be
possible that you don't have commit 2da2740fb9c8 ("soc: renesas: rz-sysc: Add
syscon/regmap support") in your tree?
This is how my tree looks like:
1db69bbb9c49 (HEAD) arm64: dts: renesas: rzg3s-smarc: Enable USB support
ee93ed9f0097 arm64: dts: renesas: r9a08g045: Add USB support
285447f934f3 reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
8c758908876c reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
8e41c54ab567 dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
02db7a65b4b3 phy: renesas: rcar-gen3-usb2: Fix an error handling path in
rcar_gen3_phy_usb2_probe()
217453b58bdf dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
0f4c93f7eb86 (tag: next-20250822, linux-next/master) Add linux-next specific
files for 20250822
and few checks on my board:
root@smarc-rzg3s:~# uname -r
6.17.0-rc2-next-20250822-00007-g1db69bbb9c49
root@smarc-rzg3s:~# [ 217.627804] usb 1-1.2: USB disconnect, device number 4
[ 217.627804] usb 1-1.2: USB disconnect, device number 4
root@smarc-rzg3s:~#
root@smarc-rzg3s:~#
root@smarc-rzg3s:~#
root@smarc-rzg3s:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 045b:022b Hitachi, Ltd
Bus 001 Device 003: ID 8087:0029 Intel Corp. AX200 Bluetooth
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@smarc-rzg3s:~# [ 231.154575] usb 1-1.2: new high-speed USB device number 5
using ehci-platform
[ 231.154575] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
[ 231.299629] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 231.299629] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 231.327087] scsi host0: usb-storage 1-1.2:1.0
[ 231.327087] scsi host0: usb-storage 1-1.2:1.0
[ 232.348676] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00
PQ: 0 ANSI: 6
[ 232.348676] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00
PQ: 0 ANSI: 6
[ 232.382829] sd 0:0:0:0: [sda] 31260672 512-byte logical blocks: (16.0 GB/14.9
GiB)
[ 232.382829] sd 0:0:0:0: [sda] 31260672 512-byte logical blocks: (16.0 GB/14.9
GiB)
[ 232.417118] sd 0:0:0:0: [sda] Write Protect is off
[ 232.417118] sd 0:0:0:0: [sda] Write Protect is off
[ 232.430023] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 232.430023] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 232.481535] sda: sda1
[ 232.481535] sda: sda1
[ 232.490719] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 232.490719] sd 0:0:0:0: [sda] Attached SCSI removable disk
root@smarc-rzg3s:~#
root@smarc-rzg3s:~#
root@smarc-rzg3s:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 045b:022b Hitachi, Ltd
Bus 001 Device 003: ID 8087:0029 Intel Corp. AX200 Bluetooth
Bus 001 Device 005: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@smarc-rzg3s:~#
root@smarc-rzg3s:~#
Thank you for looking to this,
Claudiu
>
> Thanks,
>
> Wolfram
>
next prev parent reply other threads:[~2025-08-28 18:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-19 5:42 [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC Claudiu
2025-08-19 5:42 ` [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S Claudiu
2025-08-19 6:29 ` Rob Herring (Arm)
2025-08-19 13:37 ` Rob Herring
2025-08-20 9:40 ` claudiu beznea
2025-08-19 5:42 ` [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe() Claudiu
2025-08-19 5:49 ` Biju Das
2025-08-19 6:01 ` claudiu beznea
2025-08-19 6:34 ` Biju Das
2025-08-19 5:42 ` [PATCH v5 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support Claudiu
2025-08-19 6:29 ` Rob Herring (Arm)
2025-08-19 5:42 ` [PATCH v5 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY Claudiu
2025-08-30 12:39 ` Claudiu Beznea
2025-08-19 5:42 ` [PATCH v5 5/7] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC Claudiu
2025-08-19 5:42 ` [PATCH v5 6/7] arm64: dts: renesas: r9a08g045: Add USB support Claudiu
2025-08-19 5:42 ` [PATCH v5 7/7] arm64: dts: renesas: rzg3s-smarc: Enable " Claudiu
2025-08-28 8:56 ` [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC Wolfram Sang
2025-08-28 18:51 ` claudiu beznea [this message]
2025-08-29 10:53 ` Wolfram Sang
2025-08-29 11:30 ` claudiu beznea
2025-08-29 11:51 ` Wolfram Sang
2025-08-29 12:17 ` claudiu beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae53d367-2ee5-49aa-82ba-86f9e84d4d25@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).