From: Geert Uytterhoeven <geert+renesas@glider.be>
To: arm-soc <arm@kernel.org>, soc <soc@kernel.org>
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [GIT PULL 3/3] Renesas DTS updates for v6.7 (take two)
Date: Fri, 13 Oct 2023 14:39:15 +0200 [thread overview]
Message-ID: <cover.1697200123.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1697200117.git.geert+renesas@glider.be>
The following changes since commit d70be079c3cf34bd91e1c8f7b4bc760356c9150c:
arm64: dts: renesas: ulcb/kf: Use multi Component sound (2023-09-25 09:25:04 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git tags/renesas-dts-for-v6.7-tag2
for you to fetch changes up to a09c3e105a208580b9d9c868bac630c9263ff564:
arm64: dts: renesas: Apply overlays to base dtbs (2023-10-12 20:34:21 +0200)
----------------------------------------------------------------
Renesas DTS updates for v6.7 (take two)
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
Note that this includes:
- Tag clk-fixes-for-linus from the clock tree, which contains the
fixed Versa3 clock generator clock index handling that was merged
in v6.6-rc4,
- Tag renesas-r9a08g045-dt-binding-defs-tag, which contains clock
definitions for the Renesas RZ/G3S (R9A08G045) SoC, shared by the
clock driver and DT source files.
----------------------------------------------------------------
Biju Das (5):
dt-bindings: clock: versaclock3: Add description for #clock-cells property
clk: vc3: Fix 64 by 64 division
clk: vc3: Fix output clock mapping
clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
Claudiu Beznea (8):
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board
arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK board
arm64: dts: renesas: r9a08g045: Add nodes for SDHI1 and SDHI2
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
arm64: dts: renesas: rzg3s-smarc-som: Spelling s/device-type/device_type/
Geert Uytterhoeven (3):
Merge tag 'clk-fixes-for-linus' of https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into renesas-dts-for-v6.7
ARM: dts: renesas: bockw: Add FLASH node
Merge tag 'renesas-r9a08g045-dt-binding-defs-tag' into renesas-dts-for-v6.7
Kuninori Morimoto (2):
arm64: dts: renesas: Add Renesas R8A779F4 SoC support
arm64: dts: renesas: Add R-Car S4 Starter Kit support
Lad Prabhakar (3):
riscv: dts: renesas: r9a07g043f: Add L2 cache node
riscv: dts: renesas: r9a07g043f: Add dma-noncoherent property
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
Marek Vasut (2):
clk: si521xx: Use REGCACHE_FLAT instead of NONE
clk: si521xx: Fix regmap write accessor
Rob Herring (1):
arm64: dts: renesas: Apply overlays to base dtbs
Timo Alho (1):
clk: tegra: fix error return case for recalc_rate
Wolfram Sang (1):
arm64: dts: renesas: ebisu: Document Ebisu-4D support
Zhifeng Tang (1):
clk: sprd: Fix thm_parents incorrect configuration
.../devicetree/bindings/clock/renesas,5p35023.yaml | 11 +-
.../bindings/clock/renesas,rzg2l-cpg.yaml | 1 +
.../devicetree/bindings/soc/renesas/renesas.yaml | 2 +-
arch/arm/boot/dts/renesas/r8a7778-bockw.dts | 34 +++
arch/arm64/boot/dts/renesas/Makefile | 38 ++++
arch/arm64/boot/dts/renesas/ebisu.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 +-
arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts | 240 ++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a779f4.dtsi | 12 +
arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 170 +++++++++++++++
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts | 18 ++
arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi | 14 ++
arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi | 14 +-
arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 20 ++
arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 20 ++
arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi | 24 ++
arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi | 142 ++++++++++++
arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 28 +++
arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 13 ++
arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi | 23 --
arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi | 56 -----
drivers/clk/clk-si521xx.c | 9 +-
drivers/clk/clk-versaclock3.c | 81 ++++---
drivers/clk/sprd/ums512-clk.c | 2 +-
drivers/clk/tegra/clk-bpmp.c | 2 +-
include/dt-bindings/clock/r9a08g045-cpg.h | 242 +++++++++++++++++++++
26 files changed, 1080 insertions(+), 140 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r9a08g045.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
create mode 100644 include/dt-bindings/clock/r9a08g045-cpg.h
prev parent reply other threads:[~2023-10-13 12:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 12:39 [GIT PULL 0/3] Renesas SoC updates for v6.7 (take two) Geert Uytterhoeven
2023-10-13 12:39 ` [GIT PULL 1/3] Renesas ARM defconfig " Geert Uytterhoeven
2023-10-13 12:39 ` [GIT PULL 2/3] Renesas DT binding " Geert Uytterhoeven
2023-10-13 12:39 ` Geert Uytterhoeven [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1697200123.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox