Linux Renesas SOC kernel development
 help / color / mirror / Atom feed
From: Clement Leger <clement.leger@linux.dev>
To: Prabhakar <prabhakar.csengg@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Simon Horman <horms@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Ralph Siemsen <ralph.siemsen@linaro.org>,
	linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	Prabhakar <prabhakar.csengg+renesas@gmail.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	stable@vger.kernel.org
Subject: Re: [PATCH net-next v5 08/24] net: dsa: rzn1-a5psw: Fix LK_LEARNCOUNT write mode encoding
Date: Fri, 20 Nov 2026 07:01:42 +0100	[thread overview]
Message-ID: <d0f5f347-a5f6-4e84-b773-f29ffcdab156@linux.dev> (raw)
In-Reply-To: <20261120002549.1908299-9-prabhakar.mahadev-lad.rj@bp.renesas.com>



On 11/20/26 01:25, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> The LK_LEARNCOUNT write mode lives in bits [31:30] of the register, but
> the driver writes the raw A5PSW_LK_LEARNCOUNT_MODE_* values (0, 1, 2)
> directly. As a result, adding an FDB entry writes "set LEARNCOUNT to 1"
> and deleting one writes "set LEARNCOUNT to 2", instead of atomically
> incrementing/decrementing the counter.
> 
> Use FIELD_PREP() with A5PSW_LK_LEARNCOUNT_MODE so the mode lands in the
> correct bit field.
> 
> Fixes: 5edf246c6869 ("net: dsa: rzn1-a5psw: add FDB support")
> Cc: stable@vger.kernel.org
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v4->v5:
> - New patch
> ---
>   drivers/net/dsa/rzn1_a5psw.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
> index 13c46cf2c420..7fd2652813ac 100644
> --- a/drivers/net/dsa/rzn1_a5psw.c
> +++ b/drivers/net/dsa/rzn1_a5psw.c
> @@ -5,6 +5,7 @@
>    * Clément Léger <clement.leger@bootlin.com>
>    */
>   
> +#include <linux/bitfield.h>
>   #include <linux/clk.h>
>   #include <linux/etherdevice.h>
>   #include <linux/if_bridge.h>
> @@ -545,7 +546,8 @@ static int a5psw_port_fdb_add(struct dsa_switch *ds, int port,
>   		goto lk_unlock;
>   
>   	if (inc_learncount) {
> -		reg = A5PSW_LK_LEARNCOUNT_MODE_INC;
> +		reg = FIELD_PREP(A5PSW_LK_LEARNCOUNT_MODE,
> +				 A5PSW_LK_LEARNCOUNT_MODE_INC);
>   		a5psw_reg_writel(a5psw, A5PSW_LK_LEARNCOUNT, reg);
>   	}
>   
> @@ -604,7 +606,8 @@ static int a5psw_port_fdb_del(struct dsa_switch *ds, int port,
>   
>   	/* Decrement LEARNCOUNT */
>   	if (clear) {
> -		reg = A5PSW_LK_LEARNCOUNT_MODE_DEC;
> +		reg = FIELD_PREP(A5PSW_LK_LEARNCOUNT_MODE,
> +				 A5PSW_LK_LEARNCOUNT_MODE_DEC);
>   		a5psw_reg_writel(a5psw, A5PSW_LK_LEARNCOUNT, reg);
>   	}
>   
> @@ -963,7 +966,8 @@ static int a5psw_setup(struct dsa_switch *ds)
>   	}
>   
>   	/* Reset learn count to 0 */
> -	reg = A5PSW_LK_LEARNCOUNT_MODE_SET;
> +	reg = FIELD_PREP(A5PSW_LK_LEARNCOUNT_MODE,
> +			 A5PSW_LK_LEARNCOUNT_MODE_SET);
>   	a5psw_reg_writel(a5psw, A5PSW_LK_LEARNCOUNT, reg);
>   
>   	/* Clear VLAN resource table */

Hi Prabhakar,

It could probably be worth it to add a small a5psw_set_learncount() 
helper that contains these the FIELD_PREP + writel.

Otherwise, LGTM:

Reviewed-by: Clément Léger <clement.leger@linux.dev>

Thanks,

Clément


  parent reply	other threads:[~2026-11-20  6:01 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20  0:25 [PATCH net-next v5 00/24] Add ETHSW support for Renesas RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 01/24] net: dsa: tag_rzn1_a5psw: Drop redundant ETH_P_DSA_A5PSW definition Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 02/24] net: dsa: tag_rzn1_a5psw: Add RZ/T2H ETHSW tag protocol support Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 03/24] net: dsa: Kconfig: Expand config description to cover RZ/T2H and RZ/N2H ETHSW Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 04/24] net: pcs: rzn1-miic: Select ETHSW port speed through SWCTRL Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 05/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Reject the "ports" node Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 06/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Limit port reg values Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 07/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Add RZ/T2H and RZ/N2H ETHSW support Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 08/24] net: dsa: rzn1-a5psw: Fix LK_LEARNCOUNT write mode encoding Prabhakar
2026-11-20  3:27   ` Andrew Lunn
2026-11-20  6:01   ` Clement Leger [this message]
2026-11-20  0:25 ` [PATCH net-next v5 09/24] net: dsa: rzn1-a5psw: Fix VLANTransmitted counter offset Prabhakar
2026-11-20  3:29   ` Andrew Lunn
2026-11-20  0:25 ` [PATCH net-next v5 10/24] net: dsa: rzn1-a5psw: Fix MDIO clock divider calculation Prabhakar
2026-11-20  6:51   ` Clement Leger
2026-11-20  0:25 ` [PATCH net-next v5 11/24] net: dsa: rzn1-a5psw: Set driver data in probe Prabhakar
2026-11-20  6:53   ` Clement Leger
2026-11-20  0:25 ` [PATCH net-next v5 12/24] net: dsa: rzn1-a5psw: Add support for optional reset control Prabhakar
2026-11-20  3:32   ` Andrew Lunn
2026-11-20  0:25 ` [PATCH net-next v5 13/24] net: dsa: rzn1-a5psw: Add support for optional timestamp clock Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 14/24] net: dsa: rzn1-a5psw: Make use dev_err_probe() Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 15/24] net: dsa: rzn1-a5psw: Get switch info via OF data Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 16/24] net: dsa: rzn1-a5psw: Choose tagging protocol based on compatible string Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 17/24] net: dsa: rzn1-a5psw: Add fixed frame length workaround for management port Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 18/24] net: dsa: rzn1-a5psw: Get pattern matcher register offsets from OF data Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 19/24] net: dsa: rzn1-a5psw: Get VLAN_RES field layout " Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 20/24] net: dsa: rzn1-a5psw: Get lookup table size " Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 21/24] net: dsa: rzn1-a5psw: Update CPU port comment for RZ/T2H Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 22/24] net: dsa: rzn1-a5psw: Keep MAC TX enabled on RZ/T2H Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 23/24] net: dsa: rzn1-a5psw: Add support for RZ/T2H Ethernet switch Prabhakar
2026-11-20  0:25 ` [PATCH net-next v5 24/24] net: dsa: Kconfig: Enable support for RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20  0:28 ` [PATCH net-next v5 00/24] Add ETHSW support for Renesas " netdev-bot+sinfo
2026-11-20  3:14 ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d0f5f347-a5f6-4e84-b773-f29ffcdab156@linux.dev \
    --to=clement.leger@linux.dev \
    --cc=andrew@lunn.ch \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=fabrizio.castro.jz@renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=prabhakar.csengg+renesas@gmail.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=ralph.siemsen@linaro.org \
    --cc=robh@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox